MWO Bushwacker Guns Pack for 3D Printing | Assembly

ABOUT THIS 3D MODEL

If you are 3D printing an army of BattleMechs in your hobby workshop, then the Guns Pack for MWO Bushwacker 3D Printing Model is a must for you! Bushwacker is a popular Inner Sphere mech that can be easily recognised by its low-slung and narrow upper torso - such a low profile build is a tough task to target for enemy units. Moreover, the mech's agility, speed and powerful long-range weaponry allow it to always be one step ahead and keep its vulnerable spots safe and sound. With this large assortment of weapons Bushwacker is unrivaled!

For your enjoyment, our contributing 3D artist created the high-quality guns pack for MWO Bushwacker 3D Printing Model. If you are looking for a nice loadout to equip the 3D printed Bushwacker to best advantage, this Guns Pack for 3D printing offers everything for you to create your most desirable Bushwacker build. Here is a full list of weapons array that comprises the pack and that you can mount your 3D printed Bushwacker Mech’s hardpoints with: BSW_X2, BSW_S2, BSW_P1, BSW_P2, BSW_HR, BSW_S2c

Choose your favourite weapons assortment for Bushwacker and set off for the next mission with your preferred variant of the Mech! 

ADAPTATION FOR 3D PRINTING

MWO Bushwacker Guns Pack for 3D Printing is a set of weapons of different types that can be used to assemble numerous Bushwacker variants. The whole moderation and adaptation of the weapon pack for different types of 3D printers took Gambody team 12 hours in total. Due to the design of the default loadout and hardpoints of the MWO Bushwacker, every initial gun the Mech is equipped with can easily be replaced with the respective weapon from the pack. During the moderation process, it was made sure that having printed the weapons that comprise the kit you will be able to easily insert them into the corresponding slots of the Bushwacker's specially designed hardpoints. Every weapon in the pack comes in STL file in a recommended position that was worked out in order to ensure the smoothness of the detail’s surface after printing and so that 3D printing beginners won't face difficulties when placing the part on a build plate. 

The model is saved in STL files, a format supported by most 3D printers. All STL files for 3D printing have been checked in Netfabb and no errors were shown.

VERSIONS' SPECIFICATIONS

FFF/FDM, DLP/SLA 1.0 version features:

• Contains 28 parts;
• The pack is comprised of loadout weapon options to assemble the following Bushwacker variants:    
• 1. BSW_X2 - based on the standard Bushwacker, this simple variant removes the ER large laser and replaces it with an additional LRM-5 launcher in the torso and a pair of medium pulse lasers;   
• 2. BSW_S2 - the S2 is a variant of the Bushwacker that makes the 'Mech more effective at short to medium ranges. The 'Mech carries an ER large laser to allow the 'Mech to engage an enemy at long ranges as it closes, supported by an LB-X AC/10
• 3. BSW_P1 - a missile boat in the mold of the X2, the P1 moves one of the left-torso LRM-5 launchers to the right torso, retaining the X1's center torso mounted ER large laser by replacing the AC/10 with lighter AC/5 and removing the machine guns.  
• 4. BSW_P2 - built for increased field endurance, the P2 moves the X1's ER large laser to the right-arm mount that previously held the AC/10 and installs the X2's twin medium pulse lasers in the center torso.5. BSW_HR
• 6. BSW_S2c - a front line that upgrades the AMS to an APD system combined with an ECM to give advanced cover for its units.
• All parts are provided in STL files in recommended positions that were worked out in order to ensure the smoothness of the details’ surfaces after printing;
• Once printed every weapon from the pack can be inserted into its designated place to modify the MWO Bushwacker 3D Printing Model.

You can get a Bushwacker Guns Pack​ for 3D Printing​ immediately after the purchase! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.

Watch the tutorial on how to assemble MWO Bushwacker Guns Pack for 3D Printing​ on Gambody YouTube channel.

Also, you may like other BattleTech 3D Printing Models.

_______

FAQ: 

• Where can I print a model if I have no printer?
• How to get started with 3D printing?
• How to set up my 3D printer?
• How to choose right 3D model print bed positioning? 
• How to paint printed figurine?

Generic

Below you can find printing recommendations for Cura, Simplify3D, Slic3r and PrusaSlicer software.

Disclaimer: The following printing settings are a recommendation, not an obligation. The parameters can vary depending on the peculiarities of your 3D printer, the material you use, and especially the particular assembly part you are working with. Each part that any model comprises often needs preliminary review, and you are free to tweak the settings the way you find suitable.

Note:

• You can scale up the model (downscaling for FFF/FDM 3D printers is not recommended!);
• All connectors should be printed at 100% Infill.

Cura printing recommendations:

These are averaged settings which were tested in the Cura 5.2.1 slicer. Test models were printed on Anycubic Vyper, Creality Ender 3 Pro with PLA filament.

To avoid printing problems, we recommend the following settings: download

Simplify3D printing recommendations:

These are averaged settings which were tested in the Simplify3D 5.0.0 slicer. Test models were printed on Anycubic Vyper, FLSUN v400, Ender3 S1 with PLA filament.

To avoid printing problems, we recommend the following settings: download

Slic3r printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in Slic3r 1.3.0 software. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PetG filaments.

To avoid printing problems, we recommend the following settings: download

PrusaSlicer printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in PrusaSlicer 2.3.1. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PETG filaments.

To avoid printing problems, we recommend the following settings: download