Godzilla Singular Point STL Files for 3D Printing | Assembly Model

ABOUT THIS 3D MODEL

Netflix and Toho’s series 'Godzilla Singular Point' retells the antagonism of Godzilla against the whole world and encapsulates it within modern Japanese anime style. With its roots of inspiration tied to Hideaki Anno's Shin Godzilla and the early Shōwa era, 'Singular Point' depicts the Big G undergoing evolution and transforming from an underdeveloped sea creature into a destructive fully-terrestrial King of Monsters.

Pushing his own boundaries, GyuraGoji takes his final form - the Godzilla Singular Point 3D print model sculpted by our contributing 3D artist. The massive monster preserves all of his infamous features - bipedal posture, extremely textured skin, a whole array of dorsal plates, and the forward-set eyes glistening with a threat. The perfect candidate to add to your collection of Godzilla evolution!

ADAPTATION FOR 3D PRINTING

Godzilla Singular Point 3D printing design is a static assembly model and its moderation and adaptation for different types of 3D printers took Gambody team 45 hours. The model's anatomy and proportions were thoroughly reviewed during the moderation process for the Kaiju to be depicted harmoniously in the intended pose.

The model’s cutting was chosen by our team to minimise the amount of generated support and some of the parts were hollowed out for you to save resin in the Eco version. In order to conceal the places where the assembly parts of the model connect, the model was cut along the contour of Godzilla's body. For you to achieve the cleanest 3D printed result, the character’s head, body, limbs, tail were divided into smaller parts, and most dorsal plates were manually cut out and provided as separate assembly parts.

All assembly parts of the 1.0 FFF/FDM version come in STL files in recommended positions that were worked out in order to ensure the smoothness of the details’ surfaces after printing and so that the 3D printing beginners won't face difficulties when placing the parts on a build plate.

The 3D print model is saved in STL files, a format supported by most 3D printers. All STL files for 3D printing have been checked in Netfabb and no errors were shown.

The model's scale was calculated from the approximate height of Naruto which is 100 000 mm. The 3D printing design's chosen scale is 1:250 for the FFF/FDM version and 1:500 for the DLP/SLA/SLS versions.

VERSIONS' SPECIFICATIONS

• 1.0 FFF/FDM version features:
• Contains 110 parts;
• A printed model is 425 mm tall, 367 mm wide, 535 mm deep;
• The assembly kit includes lock 109_ge_lock_10H(x90) and 110_ge_lock_7S(x1) to attach the model's parts securely without glue; 109_ge_lock_10H(x90) needs to be printed 90 times, and 110_ge_lock_7S(x1) needs to be printed once;
• All parts are divided in such a way that you will print them with the smallest number of support structures.

1.0 DLP/SLA version features:

• Contains 21 parts;
• A printed model is 213 mm tall, 184 mm wide, 269 mm deep;
• All parts are divided in such a way to fit the build plates and to ensure that support structures are generated where needed.

1.0 DLP/SLA Eco version features:

• Contains 21 parts;
• A printed model is 213 mm tall, 184 mm wide, 269 mm deep;
• Some parts are manually hollowed out to save resin.

1.0 SLS version features:

• Made as a solid one-piece Godzilla model;
• A printed model is 213 mm tall, 184 mm wide, 269 mm deep;
• Contains 2 parts - a solid Godzilla model and its platform.

You can get the STL Files of Godzilla Singular Point 3D Print Model immediately after the purchase! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.

Watch the tutorial on how to assemble the 3D Printed Godzilla Singular Point Model from the provided 3D Print Files at Gambody YouTube channel.

Also, you may like the Shin Godzilla 3D Print Model, as well as other Kaiju 3D Printing Designs.

_______

FAQ:

• Where can I print a model if I have no printer?
• How to get started with 3D printing?
• How to set up my 3D printer?
• How to choose right 3D model print bed positioning?
• How to paint printed model?

Generic

Below you can find printing recommendations for Cura, Bambu Studio, Simplify3D, Slic3r and PrusaSlicer software.

Disclaimer: The following printing settings are a recommendation, not an obligation. The parameters can vary depending on the peculiarities of your 3D printer, the material you use, and especially the particular assembly part you are working with. Each part that any model comprises often needs preliminary review, and you are free to tweak the settings the way you find suitable.

Note:

You can scale up the model (downscaling for FFF/FDM 3D printers is not recommended!);

All connectors should be printed at 100% Infill.

Bambu Lab printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in Bambu Studio 1.9.1. Test models were printed on the Bambu Lab A1, Bambu Lab A1 Mini, Creality Ender 3 S1, Anycubic Kobra 2, and Anycubic Vyper using PLA and PETG filaments.

To avoid printing problems, we recommend the following settings: download

Cura printing recommendations:

These are averaged settings which were tested in the Cura 5.2.1 slicer. Test models were printed on Anycubic Vyper, Creality Ender 3 Pro with PLA filament.

To avoid printing problems, we recommend the following settings: download

Simplify3D printing recommendations:

These are averaged settings which were tested in the Simplify3D 5.0.0 slicer. Test models were printed on Anycubic Vyper, FLSUN v400, Ender3 S1 with PLA filament.

To avoid printing problems, we recommend the following settings: download

Slic3r printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in Slic3r 1.3.0 software. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PetG filaments.

To avoid printing problems, we recommend the following settings: download

PrusaSlicer printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in PrusaSlicer 2.3.1. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PETG filaments.

To avoid printing problems, we recommend the following settings: download