Halloween Pumpkins 3D Printing Figurines | Assembly

ABOUT THIS 3D MODEL

Halloween pumpkins, without exaggeration, can be called the most famous symbol of All Saints' Day. The tradition of making jack-o'-lanterns is loved and celebrated in many countries around the world. Children and adults spend time together carving scary, funny, cunning, grinning pumpkins to decorate their houses and create a holiday atmosphere.

In honor of the celebration of Halloween, we created Halloween Pumpkins in the form of STL files for you to 3D print these amazing holiday decorations. Charismatic Jack Skellington pumpkin, funny Mike Wazowski pumpkin, equipped with focus lens Death Star pumpkin, vicious Xenomorph pumpkin, or royal Loki pumpkin, all of the figurines will bring you a lot of joy when 3D printing. Moreover, you can put flameless candles inside the pumpkins to make them look even more realistic. Merry Halloween!

ADAPTATION FOR 3D PRINTING

Halloween Pumpkins for 3D printing is a static assembly model and its moderation and adaptation for different types of 3D printers took the Gambody team 42 hours in total. 

For you to receive the cleanest 3D printing result possible, and minimize the amount of filament needed for generated support, the figurines were divided into convenient assembly parts.

All assembly parts are provided in STL files in recommended positions that were worked out in order to ensure the smoothness of the details’ surfaces after printing and that the 3D printing beginners won't face difficulties when placing the parts on a build plate.

The model is saved in STL files, a format supported by most 3D printers. All STL files for 3D printing have been checked in Netfabb and no errors were shown.

VERSIONS’ SPECIFICATIONS

Jack Skellington Pumpkin Large/Small 1.0 version features:

• Contains 6 and 2 parts respectively;
• A printed large model is 250 mm tall, 250 mm wide, 250 mm deep;
• A printed small is 125 mm tall, 125 mm wide, 125  mm deep;

Loki Pumpkin Large/Small 1.0 version features:

• Contains 10 and 4 parts respectively;
• A printed large model is 307 mm tall, 265 mm wide, 250 mm deep;
• A printed small model is 153 mm tall, 133 mm wide, 125 mm deep;

Mike Wazowski Pumpkin Large/Small 1.0 version features:

• Contains 9 and 2 parts respectively;
• A printed large model is 218 mm tall, 250 mm wide, 226 mm deep;
• A printed small model is 109 mm tall, 125 mm wide, 113 mm deep;

Death Star Pumpkin Large/Small 1.0 version features:

• Contains 11 and 3 parts respectively;
• A printed large model is 284 mm tall, 260 mm wide, 263  mm deep;
• A printed small model is 147 mm tall, 130 mm wide, 131 mm deep;

Jack Skellington Large/Small 1.0 version features:

• Contains 7 and 2 parts;
• A printed large model is 319 mm tall, 240 mm wide, 250 mm deep;
• A printed small model is 160 mm tall, 120 mm wide, 125 mm deep;

You can get the Halloween Pumpkins model for 3D printing immediately after the purchase! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.

Watch the tutorial on how to assemble a Halloween Pumpkins 3D Printing Model on Gambody YouTube channel.

________

FAQ: 

• Where can I print a model if I have no printer?
• How to get started with 3D printing?
• How to set up my 3D printer?
• How to choose right 3D model print bed positioning? 
• How to paint printed figurine?

Generic

Below you can find printing recommendations for Cura, Simplify3D, Slic3r, PrusaSlicer and Bambu Lab software.

Disclaimer: The following printing settings are a recommendation, not an obligation. The parameters can vary depending on the peculiarities of your 3D printer, the material you use, and especially the particular assembly part you are working with. Each part that any model comprises often needs preliminary review, and you are free to tweak the settings the way you find suitable.

Note:

You can scale up the model (downscaling for FFF/FDM 3D printers is not recommended!);

All connectors should be printed at 100% Infill.

Bambu Lab printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in Bambu Studio 1.9.1. Test models were printed on the Bambu Lab A1, Bambu Lab A1 Mini, Creality Ender 3 S1, Anycubic Kobra 2, and Anycubic Vyper using PLA and PETG filaments.

To avoid printing problems, we recommend the following settings: download

Cura printing recommendations:

These are averaged settings which were tested in the Cura 5.2.1 slicer. Test models were printed on Anycubic Vyper, Creality Ender 3 Pro with PLA filament.

To avoid printing problems, we recommend the following settings: download

Simplify3D printing recommendations:

These are averaged settings which were tested in the Simplify3D 5.0.0 slicer. Test models were printed on Anycubic Vyper, FLSUN v400, Ender3 S1 with PLA filament.

To avoid printing problems, we recommend the following settings: download

Slic3r printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in Slic3r 1.3.0 software. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PetG filaments.

To avoid printing problems, we recommend the following settings: download

PrusaSlicer printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in PrusaSlicer 2.3.1. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PETG filaments.

To avoid printing problems, we recommend the following settings: download