Harley-Davidson Fat Boy 1991 3D Printing Model | Assembly

ABOUT THIS 3D MODEL

“Judgement Day”, the 1991 sequel to The Terminator by James Cameron is a story of a robot-driven apocalypse that stars the beloved T-800 Arnold Schwarzenegger. In the beginning of the action-packed sci-fi adventure, the titular hero steals a pair of sunglasses and a 1991 Harley-Davidson Fat Boy near a bar. This motorcycle would later become one of the highlight vehicles of the film and one of Harley-Davidson's best-selling models!

Our skilled contributing 3D artist got an idea of recreating a vehicle behind the most famous jump in cinema history. Thus, the brilliant Harley-Davidson Fat Boy 1991 from the second instalment of the Terminator franchise was brought to life in its 3D printing form! The author of the iconic 3D printing motorbike model studied all possible references and dedicated a lot of attention to the small details of the Fat Boy for your 3D printed Harley-Davidson to be envied even by the omnipresent Skynet.

ADAPTATION FOR 3D PRINTING

Harley-Davidson Fat Boy 1991 for 3D printing is a static assembly model and its moderation and adaptation for different types of 3D printers took Gambody team 42 hours in total. For you to receive the cleanest 3D printing result possible and to minimize the amount of filament needed for generated support the highly-detailed motorcycle model was divided into many assembly parts.

All assembly parts are provided in STL files of the FFF/FDM version in recommended positions that were worked out to ensure the smoothness of the details’ surfaces after printing and that the 3D printing beginners won't face difficulties when placing the parts on a build plate. When downloading any model's file you will also receive "Assembly Manual" for FFF/FDM 1.0 and DLP/SLA 1.0 versions in PDF format. We highly recommend that you get acquainted with the “Assembly video” and "Assembly Manual" before getting down to the Harley-Davidson Fat Boy model.

The model is saved in STL files, a format supported by most 3D printers. All STL files for 3D printing have been checked in Netfabb and no errors were shown.

The model's scale was calculated from the actual length of the Harley-Davidson Fat Boy 1991 which is 2395 mm. The 3D printing model's chosen scale is 1:8 for the FFF/FDM version and 1:16 for the DLP/SLA versions.

VERSIONS' SPECIFICATIONS

FFF/FDM 1.0 version features:
- The version contains 72 parts;
- A printed motorcycle stands 162 mm tall, 144 mm wide, 300 mm deep;
- The connection of the front wheel, fork and the handlebar creates steering axis;
- The kickstand and headlight can go up and down, while the wheels rotate;
- A sitting T-800 3D printing figurine to display with the Fat Boy is sold separately;
- All parts are divided in such a way that you will print them with the smallest number of support structures.

DLP/SLA 1.0 version features:
- The version contains 46 parts;
- A printed motorcycle stands 81 mm tall, 72 mm wide, 150 mm deep;
- The connection of the front wheel, fork and the handlebar creates steering axis;
- The kickstand and headlight can go up and down, while the wheels rotate;
- A sitting T-800 3D printing figurine to display with the Fat Boy is sold separately;
- All parts are divided in such a way to fit the build plates and to ensure that support structures are generated where needed.

DLP/SLA Eco 1.0 version features:
- The version contains 46 parts;
- A printed motorcycle stands 81 mm tall, 72 mm wide, 150 mm deep;
- The connection of the front wheel, fork and the handlebar creates steering axis;
- The kickstand and headlight can go up and down, while the wheels rotate;
- A sitting T-800 3D printing figurine to display with the Fat Boy is sold separately;
- All parts are divided in such a way to fit the build plates and to ensure that support structures are generated where needed;
- Contains some hollowed-out parts to save resin.

You can get the model of Harley-Davidson Fat Boy 1991 for 3D Printing immediately after the purchase! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.

Watch the tutorial on how to assemble Harley-Davidson Fat Boy 1991 3D Printing Model at Gambody YouTube channel.

Also, you may like Terminator 3D Printing Figurines, as well as more Motorcycle 3D Printing Models.

Generic

Below you can find printing recommendations for Cura, Bambu Lab, Simplify3D, Slic3r and PrusaSlicer software.

Disclaimer: The following printing settings are a recommendation, not an obligation. The parameters can vary depending on the peculiarities of your 3D printer, the material you use, and especially the particular assembly part you are working with. Each part that any model comprises often needs preliminary review, and you are free to tweak the settings the way you find suitable.

Note:

You can scale up the model (downscaling for FFF/FDM 3D printers is not recommended!);

All connectors should be printed at 100% Infill.

Bambu Lab printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in Bambu Studio 1.9.5. Test models were printed on the Bambu Lab A1, Bambu Lab A1 Mini, Creality Ender 3 S1, Anycubic Kobra 2, and Anycubic Vyper using PLA and PETG filaments.

To avoid printing problems, we recommend the following settings: download

Cura printing recommendations:

These are averaged settings which were tested in the Cura 5.8.1 slicer. Test models were printed on Anycubic Vyper, Creality Ender 3 Pro with PLA filament.

To avoid printing problems, we recommend the following settings: download

Simplify3D printing recommendations:

These are averaged settings which were tested in the Simplify3D 5.0.0 slicer. Test models were printed on Anycubic Vyper, FLSUN v400, Ender3 S1 with PLA filament.

To avoid printing problems, we recommend the following settings: download

Slic3r printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in Slic3r 1.3.0 software. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PetG filaments.

To avoid printing problems, we recommend the following settings: download

PrusaSlicer printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in PrusaSlicer 2.3.1. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PETG filaments.

To avoid printing problems, we recommend the following settings: download