MWO King Crab Guns for 3D Printing

Upgrade the regular King Crab 3D model with incredible weaponry that you can 3D print and mount on your 3D printed model.

There’s a wide range of weapons to choose from:

• AC20, AC10, AC2, Ultra AC5, AC5
• Gauss rifle, flamer, laser, PPC
• LRM20, LRM15, LRM10
• SRM2

All in all, there are 38 parts that make up the entire 3D model’s weaponry. The weapons are divided into 4 categories and can be mounted on the shoulder and the claws of your 3D printed King Crab 3D model.

To identify where each one goes, they are marked with different colors in the photo slider.

Assembling the weaponry to your King Crab 3D model is easy. The 3D model is provided with specially designed slots where the weapon fits in.

As King Crab itself, the weapons for the 3D model are created in Autodesk Maya and converted to STL file format. The files are checked and corrected in Netfabb and can be handled in any type of slicing program.

Buy King Crab Guns for 3D printing by clicking the green Buy button. Add the files to the shopping cart. Continue to checkout, provide the credit card or PayPal details and download the files in a .zip folder.

The files are optimized to be 3D printed on a desktop 3D printer.

Select the files you want to print and click the Print with 3DHubs or Print with Treatstock buttons if you don’t own a 3D printer of your own. You can choose the 3D printing service from our partners, that is convenient for you.

​

Generic

This model was tested in Cura 15.06. To avoid printing problems, we recommend the following settings:

Quality

• Layer height: 0.1mm*
• Initial layer thickness: 0.3mm
• Bottom/top pattern: lines
• Skin perimeter line count: 0
• Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers).

*Layer Height 0.1mm is recommended for a better quality for the printed model. However, the printing time will double.

As a STL file provider, our goal is to ensure that the files are error-free and printable in the most accurate way. This is why, we only test print the most difficult segments of the model’s parts.

The model's parts have been tested and printed in PLA. In case you need advice where to get your filaments from, check our partner's website.

Speed setups:

• Infill speed: 30mm/s
• Outer shell speed : 30mm/s
• Inner shell speed: 20mm/s
• Top/bottom speed: 20mm/s
• Support speed: 50mm/s
• Travel speed: 150mm/s
• Skirt speed: 30mm/s
• Amount of slower layers: 4

Infill:

• Infill pattern: Grid
• Line distance: 1.5mm
• Infill overlap: 20%
• Infill layers: 0

Support:

• Enable support: Check
• Placement: Everywhere
• Overhang angle: 30°
• X/Y distance: 0.7mm
• Top distance: 0.2mm
• Bottom distance: 0.2mm
• Stair step height: 0.5mm
• Join distance: 0.7mm
• Area smoothing: 0.6mm
• Use towers: check
• Pattern: Grid
• Line distance: 1.5mm

Platform adhesion:

• Type: Brim
• Brim line count: 10 (up to 20, depending on the model’s height)

Other 3D printing recommendations:

Outer Shell Speed - 20mm/s and Support Speed - 40mm/s settings apply to avoid model deformation.  Apply other settings by default.

Disclaimer: This model will look outstanding if printed on SLA/SLS 3D printer. The accuracy of the model printed on FFF printer can vary from the result shown in the pictures.