Lifestealer N'AIX 3D Print Model | Static Figure

Inspired by the video game melee hero, Lifestealer 3D model truly replicates the monstrous beast. If you’ve been looking for a 3D model as terrifying as this one, look no further.

The in-game character is known to feast on his prey, consuming the flesh and blood. While doing so, he is regenerating himself and gaining strength for other new attacks on the victims.

Lifestealer 3D model is modeled in Autodesk Maya and ZBrush simultaneously. It is converted into.STL format (3D printing file format). The .STL file has been repaired and corrected in Netfabb and executed in CURA 15.06 (printing software from ULTIMAKER) and Repetier Host. Results show no error. You can see screenshots from the software in the model's photo gallery.

This model does not have UV (you don’t need UV for printing). The size of the model is not specified because you can adjust it individually, according to your preferences, or the software will automatically set the size according to your printer’s heated bed (I recommend a width of no less than 18cm). The file measures 75.5Mb and will be uploaded more slowly to the printing software; however, you will be surprised by the result.

Buy Lifestealer N’aix 3D model STL file by clicking the green Buy button. Proceed to checkout. Provide your credit card or PayPal account details download the file. 

Or print with 3DHubs directly from our website. Select the file you want to 3D print and click the Print with 3DHubs button. You will be redirected to 3DHubs website, where you can choose from a wide range of 3D printing services and 3D printing materials and wait for the 3D model to be shipped to your doorstep.

________________________

Version 2

On 05.05.2017 STL files for assembly version of the 3D model have been added and are already available for purchase and download. See Version 2

Generic

 For a smoother and more quality printing, apply the following settings in CURA printing software:

Quality

Layer height: 0.1mm
Initial layer thickness: 0.3mm
Bottom/top pattern: lines
Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers).

Check this Simplify3D User Guidelines to avoid any 3D printing problems with this software.

The model has been tested and printed in PLA. In case you need advice where to get your filaments from, check our partner's website.

Speed setups:

Infill speed: 50mm/s
Outer shell speed: 30mm/s
Inner shell speed; 20mm/s
Top/bottom speed: 20mm/s
Support speed: 50mm/s
Travel speed: 100mm/s
Skirt speed: 30mm/s
Amount of slower layers: 4
Infill:

Infill pattern: Grid
Line distance: 3mm
Infill overlap: 20%
Infill layers: 0
Support:

Enable support: Check
Placement: Everywhere
Overhang angle: 30
X/Y distance: 0.7mm
Top distance: 0.2mm
Bottom distance: 0.2mm
Stair step height: 0.5mm
Join distance: 0.7mm
Area smoothing: 0.6mm
Use towers: Check
Pattern: Lines
Line distance: 1.0mm
Platform adhesion:

Type: Brim
Brim line count: 10 (up to 20, depending on the models height)
Other 3D printing recommendations:

Outer Shell Speed - 20mm/s and Support Speed - 40mm/s setting apply to avoid model deformation. Other settings  by default.
Disclaimer: This model will look outstanding if printed on SLA/SLS 3D printer. The accuracy of the model printed on FFF printer can vary from the result shown in the pictures.