MWO Marauder Weapon Pack for 3D Printing | Assembly

Upgrade your regular Marauder 3D model with these awesome Marauder Guns for 3D printing. There is a wide range of weapons to choose from and mount on your 3D printed Mech.

The weapon pack includes guns for shoulders, arms, and torso:

• LBX 18, Auto Cannon 2, PPC, Auto Cannon 5;
• Ultra Auto Cannon 5;
• Flamer, Laser.

All these guns are mountable on your regular Marauder Mech 3D model. Replacing is simple and fuss-free, thanks to the special fitting slots.

The Marauder guns 3D printing are available in STL file format. The files are created in Autodesk Maya and are checked in Netfabb.

The files are easily handled both in CURA 15.06 and Simplify3D programs.

All in all, there are 53 separate parts that you can print on any type of 3D printer. The size of the weapons is proportional to the size of the 3D model.

By upgrading your Marauder 3D model with these incredible gun parts you will prepare your bipedal friend for fight. Bring upgraded Timber Wolf 3D model along and let them show you serious action.

Buy Marauder guns for 3D printing by clicking the green Buy button. Proceed to checkout. Provide your PayPal or credit card details and download accurate gun parts for Marauder 3D model.

Note: You can 3D print Marauder gun parts with 3DHubs directly from our site. Put the checkmark in the box next to the file you want to print and click Print with 3DHubs button. You will be redirected to their website, where you can choose the 3D printing service provider that is closer to you (by location), the material you want the model to be printed in. There are also other options available.

________________________

On 26.12.2016 the model files have been optimized and made solid. They now are adapted to be 3D printed using any slicing program. 3D model files are already available for purchase and download. 

Generic

This model was tested in Cura 15.06. To avoid printing problems, we recommend the following settings:

Quality

• Layer height: 0.1mm*
• Initial layer thickness: 0.3mm
• Bottom/top pattern: lines
• Skin perimeter line count: 0
• Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers).

*Layer Height 0.1mm is recommended for a better quality for the printed model. However, the printing time will double.

Check this **Simplify3D User Guidelines to avoid any 3D printing problems with this software.
**On 26.12.2016, the 3D model files have been optimized. You can print them without following these Simplify3D guidelines, as the model is solid.

As a STL file provider, our goal is to ensure that the files are error-free and printable in the most accurate way. This is why, we only test print the most difficult segments of the model’s parts.

The model's parts have been tested and printed in PLA. In case you need advice where to get your filaments from, check our partner's website.

Speed setups:

• Infill speed: 30mm/s
• Outer shell speed : 30mm/s
• Inner shell speed: 20mm/s
• Top/bottom speed: 20mm/s
• Support speed: 50mm/s
• Travel speed: 150mm/s
• Skirt speed: 30mm/s
• Amount of slower layers: 4

Infill:

• Infill pattern: Grid
• Line distance: 1.5mm
• Infill overlap: 20%
• Infill layers: 0

Support:

• Enable support: Check
• Placement: Everywhere
• Overhang angle: 30°
• X/Y distance: 0.7mm
• Top distance: 0.2mm
• Bottom distance: 0.2mm
• Stair step height: 0.5mm
• Join distance: 0.7mm
• Area smoothing: 0.6mm
• Use towers: check
• Pattern: Grid
• Line distance: 1.5mm

Platform adhesion:

• Type: Brim
• Brim line count: 10 (up to 20, depending on the model’s height)

Other 3D printing recommendations:

Outer Shell Speed - 20mm/s and Support Speed - 40mm/s settings apply to avoid model deformation.  Other settings by default.

Disclaimer: This model will look outstanding if printed on SLA/SLS 3D printer. The accuracy of the model printed on FFF printer can vary from the result shown in the pictures.