MWO Zeus 3D Printing Model | Assembly + Action

MWO Zeus Mech 3D model is another BattleMech that joins the wide range of bipedal vehicles from the classic video game.

The Zeus Mech is a long-range shooting machine, capable of engaging the enemy in hit-and-run attacks. It features a fast speed, which makes it capable of keeping up with other Mechs from the same range. It also has a powerful and tough armor and versatile weaponry. Due to its range of weapons, Zeus Mech can engage is fights and defeat its enemy in the blink of an eye.

3D modeler incorporated this and many other surprises in the Zeus Mech 3D model. It features the most accurate components and elements, with incredible outer shell detailing.

The Zeus 3D model is designed and modeled in Autodesk Maya 3D modeling program. It is a high-poly model. Every part of the 3D model is saved in STL file format. This format can be easily handled in any slicing program with ease.

The STL files passed correction in Netfabb and are absolutely error-free.

There are 44 separate parts that make up the entire mech.

Also, after printing and assembly, the Zeus 3D model will stand 300mm tall, 169mm deep, and 192mm wide.

Buy MWO Zeus Mech 3D model STL files by clicking on the Buy button. Provide your PayPal or credit card details.

Check the files you want to print directly from Gambody website and click Print with 3DHubs button to print them with 3DHubs 3D printing service.

On 28.11.2016 the model files have been optimized and made solid. They now are adapted to be 3D printed using any slicing program. 3D model files are already available for purchase and download. 

________________________

On 26.02.2018 new scale and new version of joints have been added.

Now, the 3D Model of Zeus MWO is available in two scale: 1/60 for Version 2 (FDM/FFF) and 1/100 for Version 3 (DLP/SLA/SLS).

There are 25 parts in Version 2 (FDM/FFF) and 12 parts for Version 3 (DLP/SLA/SLS).

Version 2 (FDM/FFF):
- Is 1:60 scale and after being printed will stand:
330 mm tall, 183 mm wide, 164 mm deep - with antennas;
280 mm tall, 183 mm wide, 164 mm deep - without antennas;
- Made with new joints and locks;
- All movable elements of the Zeus Mech were saved.

Version 3 (DLP/SLA/SLS):
- Is 1:100 scale and will stand:
197 mm tall, 109 mm wide, 98 mm deep - with antennas;
168 mm tall, 109 mm wide, 98 mm deep - without antennas;
- Made with new joints;
- All movable elements of the Zeus Mech were saved;
- Has as few details as possible to keep printing costs down.

With new joints from Version 2 and Version 3 you will get next advantages:
1. Increases frictional force;
2. Possible to up scale or down scale the whole model;
3. Printable from any type of material;
4. Higher strength;
5. Material shrinkage does not affect at strength and friction.

STL files with new scale and new joints are already available for download in “Source files” tab for:
- Version 2 - STL files on FDM/FFF 3D printers;
- Version 3 - STL files on DLP/SLA/SLS 3D printers.

Watch the tutorial video on how to assemble Zeus MWO 3D Printing Miniature at Gambody YouTube channel. 

_______
FAQ: 
Where can I print a model if I have no printer?
How to get started with 3D printing?
How to set up my 3D printer?
How to choose right 3D model print bed positioning? 
How to paint printed figurine?

Generic

This model was tested in Cura 3.1.0. and printed on an Ultimaker 2 in PLA material.

Note:

One part of Lock (7_Ge_lock_7S_x11) you need to print 11 times;
One part of Connector (3_GE_Connector_A_A_x2) you need to print twice;
One part of Claw (8_B_claw_x6) you need to print 6 times;
One part of Connector (13_GE_Connector_B_D_x3) you need to print 3 times;
One part of Ball Joint 2 (9_Axis_2_B_Joint_x4) you need to print 4 times;
One part of Ball Joint 1 (23_Axis_1_B_Joint_x2) you need to print twice;

- You can print new joints from Version 2 and Version 3 with 20-30% infill.
- With the new joints from Version 2 and Version 3 you can up scale or down scale the whole model.

- Connectors should be printed at 100% infill.

- For all parts of Locks you need to change "Brim" type to "Skirt" in Build Plate Adhesion section.

To avoid printing problems, we recommend the following settings:

Quality

Layer Height: 0.1 mm
Initial Layer Height: 0.3 mm
Slicing Tolerance: Middle
Line Width: 0.4 mm
Wall Line Width: 0.4 mm
   Outer Wall Line Width: 0.4 mm
   Inner Wall(s) Line Width: 0.4 mm
   Top/Bottom Line Width: 0.4 mm
   Infill Line Width: 0.4 mm
   Skirt/Brim Line Width: 0.4 mm
   Support Line Width: 0.4 mm
 Initial Layer Line Width: 100%

Shell 

Wall Thickness: 0.8 mm
Wall Line Count: 2
Outer Wall Wipe Distance: 0.2 mm
Top Surface Skin Layers: 0
Top/Bottom Thickness: 0.8 mm
   Top Thickness: 0.8 mm 
      Top Layers: 8
    Bottom Thickness: 0.8 mm
      Bottom Layers: 8
Top/Bottom Pattern: Lines
Bottom Pattern Initial Layer: Lines
Top/Bottom Line Directions: [ ]
Outer Wall Inset: 0 mm
Compensate Wall Overlaps: Check
    Compensate Outer Wall Overlaps: Check
    Compensate Inner Wall Overlaps: Check
Fill Gaps Between Walls: Everywhere
Filter Out Tiny Gaps: Check
Horizontal Expansion: 0 mm
Initial Layer Horizontal Expansion: 0 mm
Z Seam Alignment: Sharpest Corner
Seam Corner Preference: Hide Seam
Ignore Small Z Gaps: Check
Extra Skin Wall Count: 1

Infill 

Infill Density: 20% (connectors should be printed at 100% infill)
Infill Line Distance: 4.0 mm
Infill Pattern: Grid
Infill Line Directions: [ ]
Infill X Offset: 0 mm
Infill Y Offset: 0 mm
Infill Overlap Percentage: 10%
    Infill Overlap: 0.04 mm
Skin Overlap Percentage: 5%
    Skin Overlap: 0.02 mm
Infill Wipe Distance: 0.1 mm
Infill Layer Thickness: 0.1 mm
Gradual Infill Steps: 0
Infill Before Walls: Check
Minimum Infill Area: 0 mm2
Skin Removal Width: 0.8 mm
    Top Skin Removal Width: 0.8 mm
    Bottom Skin Removal Width: 0.8 mm
Skin Expand Distance: 0.8
    Top Skin Expand Distance: 0.8
    Bottom Skin Expand Distance: 0.8
Maximum Skin Angle for Expansion: 90˚
    Minimum Skin Width for Expansion: 0.0

Material 

Enable Retraction: Check
Retraction Extra Prime Amount: 0 mm3 
Retraction Minimum Travel: 0.8 mm
Maximum Retraction Count: 90
Minimum Extrusion Distance Window: 6.5 mm
Nozzle Switch Retraction Distance: 16 mm
Nozzle Switch Retraction Speed: 20 mm/s
    Nozzle Switch Retract Speed: 20 mm/s
    Nozzle Switch Prime Speed: 20 mm/s 

Speed 

Print Speed: 45 mm/s
    Infill Speed: 50 mm/s
    Wall Speed: 22.5 mm/s
      Outer Wall Speed: 22.5 mm/s
      Inner Wall Speed: 45 mm/s
    Top/Bottom Speed: 15 mm/s
    Support Speed: 45 mm/s
      Support Infill Speed: 45 mm/s
Travel Speed: 80 mm/s
Initial Layer Speed: 15 mm/s

    Initial Layer Print Speed: 15 mm/s
    Initial Layer Travel Speed: 26.6667 mm/s
Skirt/Brim Speed: 15 mm/s
Maximum Z Speed: 0 mm/s
Number of Slower Layers: 2

Travel 

Combing Mode: All
Avoid Printed Parts when Traveling: Check
Travel Avoid Distance: 0.625 mm 
Cooling 
Enable Print Cooling: Check
Fan Speed: 100%
    Regular Fan Speed: 100%
    Maximum Fan Speed: 100% 
Regular/Maximum Fan Speed Threshold: 10 s
Initial Fan Speed: 0%
Regular Fan Speed at Height: 0.3 mm
    Regular Fan Speed at Layer: 2 
Minimum Layer Time: 5 s
Minimum Speed: 10 mm/s

Support 

Generate Support: Check
Support Placement: Everywhere
Support Overhang Angle: 60°
Support Pattern: Zig Zag
Connect Support ZigZags: Check
Support Density: 15 %
    Support Line Distance: 1.3333 mm
Support Z Distance: 0.3 mm
    Support Top Distance: 0.3 mm
    Support Bottom Distance: 0.3 mm
Support X/Y Distance: 0.7 mm
Support Distance Priority: Z overrides X/Y
Minimum Support X/Y Distance: 0.2 mm
Support Stair Step Height: 0.3 mm
Support Stair Step Maximum Width: 5.0 mm
Support Join Distance: 2.0 mm
Support Horizontal Expansion: 0.2 mm
Support Infill Layer Thickness: 0.1 mm
Use Towers: Check
Tower Diameter: 3.0 mm
Minimum Diameter: 3.0 mm
Tower Roof Angle: 65° 

Build Plate Adhesion 

Build Plate Adhesion Type: Brim (for all parts of locks use "Skirt")
Skirt/Brim Minimum Length: 250 mm
Brim Width: 8.0 mm
    Brim Line Count: 18 
Brim Only on Outside: Check

Mesh Fixes 

Union Overlapping Volumes: Check
Maximum Resolution: 0.01 mm
Merged Meshes Overlap: 0.15 mm

Special Modes

Print Sequence: All at Once
Surface Mode: Normal

Disclaimer: This model will look outstanding if printed on SLA/SLS 3D printer. The accuracy of the model printed on FFF printer can vary from the result shown in the pictures.