YoRHa A2 Fighting Posture STL Files for 3D Printing | Assembly Model

ABOUT THIS 3D MODEL

Nier: Automata video game captivates with its spectacular open world, dynamic combat and, of course, the engaging characters. A2 is possibly the most enigmatic of YoRHa androids, so it must be the air of mystery surrounding her that makes A2 so loved by the franchise’s fans, both as a boss and a playable character!

A2 3D model by Gambody’s hardworking contributing 3D artist incorporates all features that you might look for in a 3D printing YoRHa Type A. Number Two wields a massive Virtuous Treaty sword that is adorned with intricate ornaments, perfect to try out your finest brushes. The 3D print model can pose with her long beautiful hair reaching the lower back, or A2 can sport a short hairstyle, similar to the one that followed the YoRHa 2B’s death. Last but not least, the 3D printing design can be displayed wearing an embroidered corset that usually explodes when the character enters Berserk mode. Created as part of YoRHa experiment, A2 became a rogue android that fascinates with skill and charisma. Don’t hesitate to run your own experiment by 3D printing the YoRHa Type A!

ADAPTATION FOR 3D PRINTING

YoRHa A2 3D printing design is a static assembly model and its moderation and adaptation for different types of 3D printers took Gambody team circa 45 hours. The model's anatomy and proportions were thoroughly reviewed during the moderation process for the android to be depicted harmoniously in the intended pose.

The model’s cutting was chosen by our team to minimise the amount of generated support and some of the parts were hollowed out for you to save resin in the Eco version. In order to conceal the places where the assembly parts of the model must be connected, the model was cut along the contour of A2’s outfit seams. For you to achieve the cleanest 3D printed result, the model's hair variants, head, blade, handguard, etc. are provided as separate assembly parts. The hilt of the Virtuous Treaty sword was extracted from the android’s hold.

All assembly parts in FFF/FDM versions come in STL files in recommended positions that were worked out in order to ensure the smoothness of the details’ surfaces after printing and so that the 3D printing beginners won't face difficulties when placing the parts on a build plate. When downloading any model's file you will also receive "Assembly Manual" for 1.0 FFF/FDM and 1.0 DLP/SLA versions in PDF format.

The 3D print model is saved in STL files, a format supported by most 3D printers. All STL files for 3D printing have been checked in Netfabb and no errors were shown.

The model's scale was calculated from A2's actual height which is 1680 mm. The 3D printing design's chosen scale is 1:8 for the FFF/FDM version, 1:16 for the DLP/SLA/SLS, and 1:4 for the Author versions.

VERSIONS' SPECIFICATIONS

1:4 by Author version features:

• The original version of the model provided by the author of the model;
• Contains 26 parts;
• The version comes in 1:4 scale;
• A printed model is 410 mm tall, 272 mm wide, 568 mm deep;
• There are two variants of A2's face in Author’s version - with and without eyelashes (it is recommended to print the former on a DLP/SLA 3D printer);
• Two variants of the platform are available - a bigger one and a simplified one;
• A2 can be displayed with long and short hairstyle;
• There are two variants of A2's body "armour".

1.0 FFF/FDM version features:

• Contains 20 parts;
• A printed model is 205 mm tall, 136 mm wide, 284 mm deep;
• The assembly kit includes lock 20_ge_lock_7S(x1) to attach the model's upper body to legs securely without glue;
• A2 can be displayed with long and short hairstyle;
• There are two variants of A2's body "armour";
• All parts are divided in such a way that you will print them with the smallest number of support structures.

1.0 DLP/SLA version features:

• Contains 12 parts;
• A printed model is 103 mm tall, 68 mm wide, 142 mm deep;
• A2 can be displayed with long and short hairstyle;
• There are two variants of A2's body "armour";
• All parts are divided in such a way to fit the build plates and to ensure that support structures are generated where needed.

1.0 DLP/SLA Eco version features:

• Contains 12 parts;
• A printed model is 103 mm tall, 68 mm wide, 142 mm deep;
• A2 can be displayed with long and short hairstyle;
• There are two variants of A2's body "armour";
• Contains some hollowed out parts to save resin.

1:5 by Author Pre-supported version features:

• Contains 26 parts;
• The version comes in 1:5 scale;
• A printed model is 410 mm tall, 272 mm wide, 568 mm deep;
• The STL files that this version comprises are pre-supported, hollowed out, and have drain holes where needed;
• You may choose to print the STL files one by one or several at once, depending on the dimensions of your resin 3D printer's build plate;
• When slicing several STL files at once, the attachment layers (Platform Touch Shape) may overlap, but the supports must not come into contact.

1.0 DLP/SLA Pre-supported version features:

• Contains 12 parts;
• A printed model is 103 mm tall, 68 mm wide, 142 mm deep;
• The STL files that this version comprises are pre-supported, hollowed out, and have drain holes where needed;
• You may choose to print the STL files one by one or several at once, depending on the dimensions of your resin 3D printer's build plate;
• When slicing several STL files at once, the attachment layers (Platform Touch Shape) may overlap, but the supports must not come into contact.

1.0 SLS version features:

• Made as a solid one-piece YoRHa A2 model;
• A printed model is 103 mm tall, 68 mm wide, 142 mm deep;
• Contains 5 parts - solid YoRHa A2 model variants and the variants with the platform separated.

You can get the STL Files of YoRHa A2 3D Print Model immediately after the purchase! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.

Watch the tutorial on how to assemble the 3D Printed YoRHa A2 Model from the provided 3D Print Files at Gambody YouTube channel.

Also, you may like other Video Games 3D Printing Designs.

_______

FAQ:

• Where can I print a model if I have no printer?
• How to get started with 3D printing?
• How to set up my 3D printer?
• How to choose right 3D model print bed positioning?
• How to paint printed model?

Generic

Below you can find printing recommendations for Cura, Bambu Studio, Simplify3D, Slic3r and PrusaSlicer software.

Disclaimer: The following printing settings are a recommendation, not an obligation. The parameters can vary depending on the peculiarities of your 3D printer, the material you use, and especially the particular assembly part you are working with. Each part that any model comprises often needs preliminary review, and you are free to tweak the settings the way you find suitable.

Note:

You can scale up the model (downscaling for FFF/FDM 3D printers is not recommended!);

All connectors should be printed at 100% Infill.

Bambu Lab printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in Bambu Studio 1.9.1. Test models were printed on the Bambu Lab A1, Bambu Lab A1 Mini, Creality Ender 3 S1, Anycubic Kobra 2, and Anycubic Vyper using PLA and PETG filaments.

To avoid printing problems, we recommend the following settings: download

Cura printing recommendations:

These are averaged settings which were tested in the Cura 5.2.1 slicer. Test models were printed on Anycubic Vyper, Creality Ender 3 Pro with PLA filament.

To avoid printing problems, we recommend the following settings: download

Simplify3D printing recommendations:

These are averaged settings which were tested in the Simplify3D 5.0.0 slicer. Test models were printed on Anycubic Vyper, FLSUN v400, Ender3 S1 with PLA filament.

To avoid printing problems, we recommend the following settings: download

Slic3r printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in Slic3r 1.3.0 software. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PetG filaments.

To avoid printing problems, we recommend the following settings: download

PrusaSlicer printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in PrusaSlicer 2.3.1. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PETG filaments.

To avoid printing problems, we recommend the following settings: download