Pickle Rick With Guns 3D Printing Figurine | Assembly

(18)
cm: 12.6 w x 12.2 d x 22.3 h
in: 4.961 w x 4.803 d x 8.78 h

Source Files

|

Description

|

Printing Details

This 3D model consists of files in StereoLithography (.Stl) format that have been optimized for 3D printing.

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

Version 1 and Version 2 are the files for Pickle Rick 3D Model optimized for 3D printing, the preview pictures of which you see above.

It is recommended:

  • to print Version 1 STL files on FDM/FFF 3D printers;
  • to print Version 2 STL files on DLP/SLA/SLS 3D printers.
File Name File Size Time / Filament Object Size
(x/y/z mm)
1_platform (repaired).stl
0.27 MiB 11 h 35 min 7 m 122 x 123 x 13 Download
3_ge_connector_1 (repaire d).stl
0.04 MiB 15 min <1 m 14 x 32 x 8 Download
4_ge_connector_2 (repaire d).stl
0.04 MiB 15 min <1 m 14 x 32 x 8 Download
5_body (repaired).stl
8.46 MiB 7 h 49 min 4 m 47 x 46 x 84 Download
6_arm_R (repaired).stl
4.23 MiB 2 h 23 min 1 m 46 x 50 x 62 Download
7_arm_1_L (repaired).stl
3.35 MiB 2 h 11 min 1 m 52 x 74 x 48 Download
8_arm_2_L_for_gun (repair ed).stl
5.83 MiB 1 h 59 min 1 m 58 x 50 x 31 Download
9_gun.stl
2.77 MiB 7 h 45 min 5 m 48 x 61 x 69 Download
10_battery (repaired).stl
0.18 MiB 40 min <1 m 12 x 11 x 44 Download
11_sub_gun (repaired).stl
1.54 MiB 21 min <1 m 10 x 42 x 19 Download
12_a1 (repaired).stl
6.92 MiB 3 h 25 min 2 m 46 x 45 x 72 Download
13_a2 (repaired).stl
5.74 MiB 3 h 14 min 2 m 46 x 43 x 72 Download
14_b1 (repaired).stl
8.99 MiB 3 h 42 min 2 m 53 x 44 x 88 Download
15_b2 (repaired).stl
7.96 MiB 3 h 31 min 2 m 52 x 43 x 87 Download
16_rat (repaired).stl
2.31 MiB 2 h 42 min 1 m 35 x 29 x 51 Download
2_legs (repaired).stl
9.50 MiB 12 h 2 min 8 m 102 x 50 x 121 Download
1_platform_v2 (repaired). stl
1.39 MiB 11 h 52 min 7 m 122 x 122 x 13 Download
5_body&legs_v2 (repaired) .stl
68.80 MiB 22 h 10 min 14 m 102 x 49 x 195 Download
solid_belt_FDM(repaired). stl
22.24 MiB 5 h 27 min 3 m 60 x 65 x 49 Download
...

HISTORY OF THE PICKLE RICK

Pickle Rick, the cult transformation of the famous and beloved character Rick. He did this because don’t want to go see a psychologist with his family. Everything was fine until Beth guessed his intentions and take off the syringe with the antidote. And the story began with the fact that the impudent cat pushed Pickle out of the garage into the street. Whence he later got into the sewers. But of course the scientific genius with elements of insanity, even being a pickle in a smelly sewer will not be lost. He created himself an exoskeleton that consists pieces of the rat body. He got out of the sewer and ended up in jail in which he was considered as a threat. In order to get out of there, he created a powerful laser that cut everything around. All attempts to destroy him were unsuccessful and he killed everyone who was on his way. He got to the psychologist to pick up a syringe from his daughter. The inspiration for creating this model was taken by the incredible battles that Rick arranged. Your attention is presented to two of his options: with a laser and without it.

ABOUT THIS 3D MODEL

The model is saved in STL files, a format supported by most 3D printers.

FDM version features:


  • Changeable hands with laser and without it;
  • In the slot for laser charges are suitable batteries AAA type;
  • All parts are divided in such way that you will print them with the smallest amount of supports.

SLS/SLA version features:


  • Same as FDM but smaller and made with few details.

All .STL files for 3D printing have been corrected in Netfabb.

Note: Before starting 3D printing the model, read the Printing Details for CURA 3.4.1, Simplify3D or Slic3r software.

There are 19 parts for FDM version and 9 parts for SLS/SLA. All parts of connectors should be printed at 100% infill.

Scale: Model made as the original size 1/1 scale in FDM version and 1/2 in SLS/SLA version.

FDM version dimensions:


  • After being printed will stand 223 mm tall, 126 mm wide, 122 mm deep;
  • Connectors should be printed at 100% infill to make them solid.

SLS/SLA version dimensions:

  • After being printed will stand 111 mm tall, 63 mm wide, 61 mm deep;
  • Has few details to keep printing costs down.

WHAT WILL YOU GET AFTER PURCHASE?

.STL files of Pickle Rick for printing which consist of 28 parts;

  • Changeable hands: with laser and without it;
  • 2 versions of Pickle Rick;
  • Detailed settings that we provide for Cura 3.4.1, Simplify3D or Slic3r for the best print;
  • High-poly detailed model of Pickle Rick;
  • Full technical support from the Gambody Support Team.

Watch the tutorial video on how to assemble Pickle Rick 3D Printing Miniature at Gambody YouTube channel.

Check this video with painted Pickle Rick 3D Model.

You can get Pickle Rick for 3D Printing right now! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.

Also, you may like another Heroes 3D models.

________________________

On 04.12.2017 model of Pickle Rick have been updated.

Now this model has new hands with weapons. Also, a rat head model was added which you can reduce or increase and print several times to create a diorama of Pickle Rick from famous cartoon.

Here is a list of new files:

FDM version:

  1. (12_a1.stl) - first hand with drilling tool;
  2. (13_a2.stl) - second hand with drilling tool;
  3. (14_b1.stl) - first hand with blade;
  4. (15_b2.stl) - second hand with blade;
  5. (16_rat.stl) - one head of rat that you can print several times.

SLS/SLA version:

  1. (4_rick_sls_2.stl) - model with blades;
  2. (5_rick_sls_3.stl) - model with drilling tools;
  3. (6_rat_sls.stl) - head of rat.

STL files are already available for download in “Source files” tab for Version 1 (FDM/FFF 3D printers) and Version 2 (SLS/SLA 3D printers). You can find them at the end of the list.

_______

FAQ: 

Generic

This model was tested in Cura 3.4.1 and printed on an Ultimaker 2 in PLA material. Below you can find printing recommendations for CuraSimplify3D and Slic3r softwares.

Cura printing recommendations:

Recommendations: For all parts of Locks you need to change "Brim" type to "Skirt" in Build Plate Adhesion section.

To avoid printing problems, we recommend the following settings:

Quality
Layer Height: 0.1 mm
Initial Layer Height: 0.3 mm
Line Width: 0.4 mm
 Wall Line Width: 0.4 mm
   Outer Wall Line Width: 0.4 mm
   Inner Wall(s) Line Width: 0.4 mm
 Top/Bottom Line Width: 0.4 mm
 Infill Line Width: 0.4 mm
 Skirt/Brim Line Width: 0.4 mm
Support Line Width: 0.4 mm
 Initial Layer Line Width: 100%

Shell 
Wall Thickness: 0.8 mm
    Wall Line Count: 2
Outer Wall Wipe Distance: 0.2 mm
Top Surface Skin Layers: 0
Top/Bottom Thickness: 0.8 mm
   Top Thickness: 0.8 mm 
      Top Layers: 8
    Bottom Thickness: 0.8 mm
      Bottom Layers: 8
Top/Bottom Pattern: Lines
Bottom Pattern Initial Layer: Lines
Top/Bottom Line Directions: [ ]
Outer Wall Inset: 0 mm
Compensate Wall Overlaps: Check
    Compensate Outer Wall Overlaps: Check
    Compensate Inner Wall Overlaps: Check
Fill Gaps Between Walls: Everywhere
Filter Out Tiny Gaps: Check
Horizontal Expansion: 0 mm
Initial Layer Horizontal Expansion: 0 mm
Z Seam Alignment: Sharpest Corner
Seam Corner Preference: Hide Seam
Ignore Small Z Gaps: Check
Extra Skin Wall Count: 1

Infill 
Infill Density: 20%
Infill Line Distance: 4.0 mm
Infill Pattern: Grid
Infill Line Directions: [ ]
Infill X Offset: 0 mm
Infill Y Offset: 0 mm
Infill Overlap Percentage: 10%
    Infill Overlap: 0.04 mm
Skin Overlap Percentage: 5%
    Skin Overlap: 0.02 mm
Infill Wipe Distance: 0.1 mm
Infill Layer Thickness: 0.1 mm
Gradual Infill Steps: 1
Gradual Infill Steps Height: 1.5 mm
Infill Before Walls: Check
Minimum Infill Area: 0 mm2
Skin Removal Width: 0.8 mm
    Top Skin Removal Width: 0.8 mm
    Bottom Skin Removal Width: 0.8 mm
Skin Expand Distance: 0.8
    Top Skin Expand Distance: 0.8
    Bottom Skin Expand Distance: 0.8
Maximum Skin Angle for Expansion: 90˚
    Minimum Skin Width for Expansion: 0.0

Material 
Initial Layer Flow: 100%
Enable Retraction: Check
Retraction Extra Prime Amount: 0 mm3 
Retraction Minimum Travel: 0.8 mm
Maximum Retraction Count: 90
Minimum Extrusion Distance Window: 6.5 mm
Nozzle Switch Retraction Distance: 16 mm
Nozzle Switch Retraction Speed: 20 mm/s
    Nozzle Switch Retract Speed: 20 mm/s
    Nozzle Switch Prime Speed: 20 mm/s 

Speed 
Print Speed: 45 mm/s
    Infill Speed: 45 mm/s
    Wall Speed: 22.5 mm/s
      Outer Wall Speed: 22.5 mm/s
      Inner Wall Speed: 45 mm/s
    Top/Bottom Speed: 15 mm/s
    Support Speed: 45 mm/s 
     Support Infill Speed: 45 mm/s
Travel Speed: 45 mm/s
Initial Layer Speed: 22.5 mm/s
  Initial Layer Print Speed: 22.5 mm/s
  Initial Layer Travel Speed: 30 mm/s
Skirt/Brim Speed: 45 mm/s
Maximum Z Speed: 0 mm/s
Number of Slower Layers: 2

Travel 
Combing Mode: All
Avoid Printed Parts when Traveling: Check
Travel Avoid Distance: 0.6562 mm
Layer Start X: 0.0 mm
Layer Start Y: 0.0 mm

Cooling 
Enable Print Cooling: Check
Fan Speed: 100%
    Regular Fan Speed: 100%
    Maximum Fan Speed: 100% 
Regular/Maximum Fan Speed Threshold: 10 s
Initial Fan Speed: 0%
Regular Fan Speed at Height: 0.3 mm
    Regular Fan Speed at Layer: 2 
Minimum Layer Time: 5 s
Minimum Speed: 10 mm/s

Support 
Generate Support: Check
Support Placement: Everywhere
Support Overhang Angle: 60°
Support Pattern: Zig Zag
Connect Support ZigZags: Check
Support Density: 15 %
    Support Line Distance: 2.5 mm
Support Z Distance: 0.15 mm
    Support Top Distance: 0.15 mm
    Support Bottom Distance: 0.15 mm
Support X/Y Distance: 1 mm
Support Distance Priority: Z overrides X/Y
Minimum Support X/Y Distance: 0.25 mm
Support Stair Step Height: 0.3 mm
Support Stair Step Maximum Width: 5.0 mm
Support Join Distance: 2.0 mm
Support Horizontal Expansion: 0.2 mm
Support Infill Layer Thickness: 0.1 mm
Gradual Support Infill Steps: 0
Use Towers: Check
Tower Diameter: 3.0 mm
Minimum Diameter: 3.0 mm
Tower Roof Angle: 65° 

Build Plate Adhesion 
Build Plate Adhesion Type: Brim (for all parts of locks use "Skirt")
Skirt/Brim Minimum Length: 250 mm
Brim Width: 8.0 mm
    Brim Line Count: 15 
Brim Only on Outside: Check

Mesh Fixes 
Union Overlapping Volumes: Check
Merged Meshes Overlap: 0.15 mm

Special Modes
Print Sequence: All at Once
Surface Mode: Normal

Experimental
Slicing Tolerance: Middle
Maximum Resolution: 0.01 mm
Flow rate compensation max extrusion offset: 0 mm
Flow rate compensation factor: 100%

Disclaimer: This model will look outstanding if printed on SLA/SLS 3D printer. The accuracy of the model printed on FFF printer can vary from the result shown in the pictures.

Simplify3D printing recommendations:

This model was tested with PLA material.

To avoid printing problems, we recommend the following settings:

Extruder
Nozzle Diameter: 0.4 mm
Extrusion Multiplier: 0.97
Extrusion Width: Auto

Retraction Distance: 5.00 mm
Extra Restart Distance: 0.00 mm
Retraction Vertical Lift: 0.08 mm
Retraction Speed: 5400.0 mm/min

Wipe Distance: 5.00 mm

Layer
Primary Layer Height: 0.2 mm
Top Solid Layers: 8
Bottom Solid Layers: 5
Outline/Perimeter Shells: 2
Outline Direction: Inside-Out

First Layer Height: 90%
First Layer Width: 100%
First Layer Speed: 20%

Additions
Use Skirt/Brim: Check
Skirt Layers: 1
Skirt Offset from Part: 6.00 mm
Skirt Outlines: 5

Infill
Internal Fill Pattern: Fast Honeycomb
External Fill Patern: Rectilinear
Interior Fill Percentage: 10%
Outline Overlap: 22%
Infill Extrusion Width: 100%
Minimum Infill Length: 5.00 mm
Combine Infill Every: 1 layers

External Infill Angle Offsets: 45/-45 deg

Support
Generate Support Material: Check
Support Infill Percentage: 15%
Extra Inflation Distance: 1.00 mm
Support Base Layers: 0
Combine Support Every: 1 layers

Dense Support Layers: 0
Dense Infill Percentage: 70%

Support Type: Normal
Support Pillar Resolution: 5.00 mm
Max Overhang Angle: 60 deg

Horizontal Offset From Part: 0.50 mm
Upper Vertical Separation Layers: 1
Lower Vertical Separation Layers: 1

Support Infill Angles: 45 deg

Temperature
Extruder 1 Temperature: 210
Heated Bed: 60

Cooling
Increase fan speed for layers below: 45.0 sec
  Maximum Cooling fan speed: 50%
Bridging fan speed override: 100%

Speeds
Default Printing Speed: 4800.0 mm/min
Outline Underspeed: 50%
Solid Infill Underspeed: 80%
Support Structure Underspeed: 80%
X/Y Axis Movement Speed: 10800.0 mm/min
Z Axis Movemen Speed: 1002.0 mm/min

Adjust printing speed for layers below: 15.0 sec 
  Allow speed reduction down to: 20%

Other
Unsupported area threshold: 20.0 sq m

Slic3r printing recommendations:

Layer height
  Layer height: 0.1 mm
  First layer height: 90%
Vertical shells
  Perimeters: 2
Horizontal shells
  Soid layers: 
              Top: 8
              Bottom: 5
Quality
  Detect thin walls: Check
  Detect bridging perimeters: Check
Advanced
  Seam position: Random
Infill
  Fill desity: 20%
  Fill pattern: Honeycomb
  Top/bottom fill pattern: Rectilinear
Reducing printing time
  Combine infill every: 1 layers
Advanced
  Solid infill every: 0 layers
  Fill angle: 25 deg
  Solid infill threshold area: 0mm
Skirt
  Loops: 2
  Distance from object: 6 mm
  Skirt height: 1 layers
  Minimum extrusion length: 4 mm
Brim 
  Brim width: 10 mm
Support material
  Generate support material: Check
  Overhang threshold: 45 deg
  Enforce support for the first: 3 layers
Raft
  Raft layers: 0 layers
Options for support material and raft
  Contact Z distance: 0.1 mm
  Pattern: Rectilinear
  Patter spacing: 2 mm
  Pattern angle: 0 deg
  Interface layers: 2 layers
  Interface pattern spacing: 0.2 mm
Speed for print moves
  Perimeters: 60 mm/s
  Small perimeters: 20 mm/s
  External perimeters: 20 mm/s
  Infill: 60 mm/s
  Solid infill: 60 mm/s
  Top solid infill: 30 mm/s
  Support material: 50 mm/s
  Support material interface: 100%
  Bridges: 30 mm/s
  Gap fill: 50 mm/s
Speed for non-print moves
  Travel: 60 mm/s
Modifiers
  First layer speed: 30 mm/s
Acceleration control
  Perimeters: 800 mm/s
  Infill: 1500 mm/s
  Bridge: 1000 mm/s
  First layer: 1000 mm/s
  Default: 1000 mm/s
Autospeed
  Max print speed: 100 mm/s
  Max volumetrix speed: 0 mm/s
Extrusion width
  Default extrusion width: 0.42 mm
  First layer: 0.42 mm
  Perimeters: 0.42 mm
  External perimeters: 0.42 mm
  Infill: 0.42 mm
  Solid infill: 0.42 mm
  Top solid infill: 0.42 mm
  Support material: 0.42 mm
Overlap
  Infill/Perimeters overlap: 20%
Flow
  Bridge flow ratio: 0.95
Other
  XY Size Compensation: 0 mm
  Threds: 8
  Resolution: 0 mm

Comments

comments powered by Disqus

Similar items

Browse more newly listed 3D printings