Pudge STL Files for 3D Printing | Assembly Model

ABOUT THIS 3D MODEL

Pudge is known in the gaming world as the Butcher for a good reason - the renowned hero of the Dota 2 video game handles his Meat Hook with exceptional skill, causing his enemies a great deal of damage! Cruel and blood-thirsty, Pudge is considered to be one of the strongest Disablers in the entire game as he is known to chop the enemy into tiny pieces, leaving no chance for survival.

Pudge the Butcher is made of innumerable rotting corpses and this fact does add to the dreadful look of the melee strength hero! This 3D print model depicts the gank master fully armed, ready to unleash his starving fury. Once printed, this Dota 3D model can wield either a Meat Hook, or a Dragonclaw Hook, and can even sport a Christmas hat to celebrate the occasion!

ADAPTATION FOR 3D PRINTING

Pudge 3D printing design is a static assembly model and its updating and adaptation for different types of 3D printers took Gambody team 45 hours in total. Due to the fact that this model was first released on Gambody in 2014 as a solid one-piece model, for all the Dota fans to print the cleanest model possible the decision was reached to update the model as a whole, to cut it into assembly parts anew and to adapt it for different types of 3D printers taking into account the present-day technology advancements. 

Thus, the model was thoroughly reviewed during the moderation process, the textures all over Pudge’s face and body were enhanced, as well as the details of the model's weapons. The model’s cutting was chosen by our team to minimize the amount of filament needed for generated support and some of the parts were hollowed out for you in the model’s Eco version to save resin.

All the assembly parts of the 1.0 FFF/FDM version are provided in STL files in recommended positions that were worked out to ensure the smoothness of the details’ surfaces after printing and for the 3D printing beginners not to face difficulties when placing the parts on a build plate. When downloading any model's file you will also receive "Assembly Manual" for 1.0 FFF/FDM and 1.0 DLP/SLA versions in PDF format. 

The 3D print model is saved in STL files, a format supported by most 3D printers. All STL files for 3D printing have been checked in Netfabb and no errors were shown.

The model's scale was calculated from the approximate height of Pudge which is 1800 mm. The 3D printing design's chosen scale is 1:8 for the FFF/FDM version and 1:16 for the DLP/SLA/SLS versions.

VERSIONS' SPECIFICATIONS

1.0 FFF/FDM version features:

• Contains 36 parts;
• A printed model is 245 mm tall, 240 mm wide, 224 mm deep​​​;
• The assembly kit includes lock 36_ge_lock_10H(x11) to attach the model's parts securely without glue that needs to be printed 11 times;
• Pudge can wield either of two hooks - a Meat Hook or a Dragonclaw Hook;
• Pudge can optionally sport a Christmas hat;
• All parts are divided in such a way that you will print them with the smallest number of support structures.

1.0 DLP/SLA version features:

• Contains 28 parts;
• A printed model is 123 mm tall, 120 mm wide, 112 mm deep;
• Pudge can wield either of two hooks - a Meat Hook or a Dragonclaw Hook;
• Pudge can optionally sport a Christmas hat;
• All parts are divided in such a way to fit the build plates and to ensure that support structures are generated where needed.

1.0 DLP/SLA Eco version features:

• Contains 28 parts;
• A printed model is 123 mm tall, 120 mm wide, 112 mm deep;
• Pudge can wield either of two hooks - a Meat Hook or a Dragonclaw Hook;
• Pudge can optionally sport a Christmas hat;
• Some parts are manually hollowed out to save resin.

2.0 SLS version features:

• Made as a solid one-piece Pudge model;
• A printed model is 123 mm tall, 120 mm wide, 112 mm deep;
• Pudge can wield either of two hooks - a Meat Hook or a Dragonclaw Hook + Pudge can optionally sport a Christmas hat;
• Contains 4 parts - solid Pudge model variants separated from the platform.

1.0 SLS version features:

• Contains 1 part;
• A printed model is 130 mm tall, 129 mm wide and 116 mm deep;
• The initial version of the Pudge 3D printing model that was released in 2014;
• The scale of the model is indeterminate.

You can get the STL Files of Pudge 3D Print Model immediately after the purchase! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.

Watch the tutorial on how to assemble the 3D Printed Pudge Model from the provided 3D Print Files at Gambody YouTube channel.

Also, you may like other Video Games 3D Printing Models.

_______

FAQ:

• Where can I print a model if I have no printer?
• How to get started with 3D printing?
• How to set up my 3D printer?
• How to choose right 3D model print bed positioning?
• How to paint printed model?

Generic

Below you can find printing recommendations for Cura, Bambu Studio, Simplify3D, Slic3r and PrusaSlicer software.

Disclaimer: The following printing settings are a recommendation, not an obligation. The parameters can vary depending on the peculiarities of your 3D printer, the material you use, and especially the particular assembly part you are working with. Each part that any model comprises often needs preliminary review, and you are free to tweak the settings the way you find suitable.

Note:

You can scale up the model (downscaling for FFF/FDM 3D printers is not recommended!);

All connectors should be printed at 100% Infill.

Bambu Lab printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in Bambu Studio 1.9.1. Test models were printed on the Bambu Lab A1, Bambu Lab A1 Mini, Creality Ender 3 S1, Anycubic Kobra 2, and Anycubic Vyper using PLA and PETG filaments.

To avoid printing problems, we recommend the following settings: download

Cura printing recommendations:

These are averaged settings which were tested in the Cura 5.2.1 slicer. Test models were printed on Anycubic Vyper, Creality Ender 3 Pro with PLA filament.

To avoid printing problems, we recommend the following settings: download

Simplify3D printing recommendations:

These are averaged settings which were tested in the Simplify3D 5.0.0 slicer. Test models were printed on Anycubic Vyper, FLSUN v400, Ender3 S1 with PLA filament.

To avoid printing problems, we recommend the following settings: download

Slic3r printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in Slic3r 1.3.0 software. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PetG filaments.

To avoid printing problems, we recommend the following settings: download

PrusaSlicer printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in PrusaSlicer 2.3.1. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PETG filaments.

To avoid printing problems, we recommend the following settings: download