Riot Symbiote in Diorama STL Files for 3D Printing | Assembly Model

ABOUT THIS 3D MODEL

While exploring space for new habitable planets, the organization called Life Foundation encountered four alien Symbiotes. Three of them are captured for research but one manages to escape. Carlton Drake, the head of the Life Foundation becomes obsessed with the possibility of bonding with the creatures, so once approached by the escaped symbiotic lifeform, he becomes its host producing a new creature named Riot. This Symbiote has all the abilities of the original Venom, but they share the same weakness, too. Carlton is aggressive and merciless - these qualities became the key element in the anger shown by Riot. And in the 2018 movie Venom, Riot and Venom have to meet face to face.

The 3D printing Venom vs Riot diorama depicts the dynamic battle scene that will most likely put an end to one of the opponents. Riot for 3D printing seems to have shapeshifted his hands into blades which make the alien parasite look even more lethal! The Riot 3D model comes with its own platform as well, so you may choose to show off either the creature within the diorama or on its own!

ADAPTATION FOR 3D PRINTING (FFF/FDM 2.0, DLP/SLA 2.0, DLP/SLA Eco 1.0, SLS 2.0)

Riot Symbiote 3D printing design is a static assembly model and its updating and adaptation for different types of 3D printers took Gambody team 40 hours in total. The model needed to be reviewed in terms of anatomy and body proportions to be depicted harmoniously in the intended pose so the decision was reached to update the model as a whole, to cut it into assembly parts anew and to adapt the model for different types of 3D printers taking into account the present-day technology advancements. 

Thus, the model was thoroughly reviewed during the moderation process, the textures all over Riot’s face and body were enhanced, as well as the details of the model's platform. The model’s cutting was chosen by our team to minimize the amount of filament needed for generated support and some of the parts were hollowed out for you in the model’s Eco version to save resin. In order to ensure the smooth 3D printed result, the Riot model was divided into multiple parts, i.e. model's forearms, blade-hands, head and legs are provided as separate parts. For the same purpose, the Riot’s tongue and upper jaw were extracted from the mouth.

All the assembly parts are provided in STL files in recommended positions that were worked out so to ensure the smoothness of the details’ surfaces after printing and that the 3D printing beginners won't face difficulties when placing the parts on a build plate. When downloading any model's file you will also receive "Assembly Manual" for 2.0 FFF/FDM.0 and 2.0 DLP/SLA versions in PDF format. 

The 3D print model is saved in STL files, a format supported by most 3D printers. All STL files for 3D printing have been checked in Netfabb and no errors were shown.

The model's scale was calculated from Venom's actual height which is 1920 mm. The 3D printing design's chosen scale is 1:8 for the FFF/FDM version and 1:16 for the DLP/SLA/SLS versions.

VERSIONS' SPECIFICATIONS

2.0 FFF/FDM version features:

• Contains 19 parts;
• A printed model is 318 mm tall, 238 mm wide, 238 mm deep;
• The model is significantly improved in accordance with anatomy and body proportions rules;
• Introduced new cutting and enhanced level of detail;
• Riot Symbiote is a part of “Venom vs Riot” diorama with Venom 3D print model;
• Riot Symbiote can be displayed on its own base or on a bigger platform to assemble the “Venom vs Riot” diorama;
• The assembly kit includes locks to attach the model's parts securely without glue. Lock 18_ge_lock_10H(x4) needs to be printed 4 times; lock 19_ge_lock_7S(x1) needs to be printed once;
• All parts are divided in such a way that you will print them with the smallest number of support structures.

2.0 DLP/SLA version features:

• Contains 6 parts;
• A printed model is 159 mm tall, 119 mm wide, 119 mm deep;
• The model is significantly improved in accordance with anatomy and body proportions rules;
• Introduced new cutting and enhanced level of detail;
• Riot Symbiote is a part of “Venom vs Riot” diorama with Venom 3D print model;
• Riot Symbiote can be displayed on its own base or on a bigger platform to assemble the “Venom vs Riot” diorama;
• All parts are divided in such a way to fit the build plates and to ensure that support structures are generated where needed.

1.0 DLP/SLA Eco version features:

• Contains 6 parts
• A printed model is 159 mm tall, 119 mm wide, 119 mm deep;
• Riot Symbiote is a part of “Venom vs Riot” diorama with Venom 3D print model;
• Riot Symbiote can be displayed on its own base or on a bigger platform to assemble the “Venom vs Riot” diorama;
• Contains some hollowed out parts to save resin.

1.0 DLP/SLA Pre-supported version features:

• Contains 6 parts;
• A printed model is 159 mm tall, 119 mm wide, 119 mm deep;
• The STL files that this version comprises are pre-supported, hollowed out, and have drain holes where needed;
• You may choose to print the STL files one by one or several at once, depending on the dimensions of your resin 3D printer's build plate;
• When slicing several STL files at once, the attachment layers (Platform Touch Shape) may overlap, but the supports must not come into contact.

2.0 SLS version features:

• Made as a solid one-piece Riot Symbiote model;
• A printed model is 159 mm tall, 119 mm wide, 119 mm deep;
• The model is significantly improved in accordance with anatomy and body proportions rules;
• Introduced new cutting and enhanced level of detail;
• Contains 3 parts - a solid Riot Symbiote model and two variants of the platform.

1.0 FFF/FDM version features:

• Contains 15 parts;
• A printed model is 407 mm tall, 256 mm wide, 262 mm deep;
• Assembly kit comprises different variants of the model's hands;
• This is the initial version of the model released in 2018.

1.0 DLP/SLA version features:

• Contains 6 parts;
• A printed model is 204 mm tall, 128 mm wide, 131 mm deep;
• Assembly kit comprises different variants of the model's hands;
• This is the initial version of the model released in 2018.

1.0 SLS version features:

• Contains 5 parts;
• A printed model is 204 mm tall, 128 mm wide, 131 mm deep;
• This is the initial version of the model released in 2018.

You can get the STL Files of Riot Symbiote in Diorama 3D Print Model immediately after the purchase! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.

Watch the tutorial on how to assemble the 3D Printed Riot Symbiote in Diorama Model from the provided 3D Print Files at Gambody YouTube channel.

Also, you may like Marvel 3D Printing Designs, as well as other Comics 3D Print Models.

_______

FAQ:

• Where can I print a model if I have no printer?
• How to get started with 3D printing?
• How to set up my 3D printer?
• How to choose right 3D model print bed positioning?
• How to paint printed model?

Generic

Below you can find printing recommendations for Cura, Bambu Studio, Simplify3D, Slic3r and PrusaSlicer software.

Disclaimer: The following printing settings are a recommendation, not an obligation. The parameters can vary depending on the peculiarities of your 3D printer, the material you use, and especially the particular assembly part you are working with. Each part that any model comprises often needs preliminary review, and you are free to tweak the settings the way you find suitable.

Note:

You can scale up the model (downscaling for FFF/FDM 3D printers is not recommended!);

All connectors should be printed at 100% Infill.

Bambu Lab printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in Bambu Studio 1.9.1. Test models were printed on the Bambu Lab A1, Bambu Lab A1 Mini, Creality Ender 3 S1, Anycubic Kobra 2, and Anycubic Vyper using PLA and PETG filaments.

To avoid printing problems, we recommend the following settings: download

Cura printing recommendations:

These are averaged settings which were tested in the Cura 5.2.1 slicer. Test models were printed on Anycubic Vyper, Creality Ender 3 Pro with PLA filament.

To avoid printing problems, we recommend the following settings: download

Simplify3D printing recommendations:

These are averaged settings which were tested in the Simplify3D 5.0.0 slicer. Test models were printed on Anycubic Vyper, FLSUN v400, Ender3 S1 with PLA filament.

To avoid printing problems, we recommend the following settings: download

Slic3r printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in Slic3r 1.3.0 software. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PetG filaments.

To avoid printing problems, we recommend the following settings: download

PrusaSlicer printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in PrusaSlicer 2.3.1. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PETG filaments.

To avoid printing problems, we recommend the following settings: download