Source Files

Description

Printing Details

This 3D Model of Spider-Gwen consists of files in StereoLithography (.Stl) format that is optimized for 3D printing.

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

WHAT WILL YOU GET AFTER PURCHASE?

5 versions of Spider-Gwen STL files for FFF/FDM and DLP/SLA - files for all versions are available for download after the purchase;
STL files of high-poly Spider-Gwen 3D Model for 3D printing consist of 43 files;
Sizes for:
FFF/FDM: 240 mm tall, 149 mm wide, 146 mm deep;
DLP/SLA: 120 mm tall, 75 wide, 73 mm deep;
Assembly Manual for FFF/FDM 1.0 and DLP/SLA 1.0 versions in PDF and video formats;
Detailed settings that we provide as a recommendation for Cura, Simplify3D, Slic3r and PrusaSlicer for the best print;
Full technical support from the Gambody Support Team.

Detailed information about this 3D printing model is available in the DESCRIPTION section.


	File Name	File Size	Time / Filament	Object Size (x/y/z mm)
	1_head_FDM (repaired).stl	43.07 MiB	4 h 40 min 2 m	32 x 37 x 47	Download
	2_head_in_mask_FDM (repai red).stl	21.85 MiB	2 h 38 min 1 m	33 x 34 x 47	Download
	3_body_FDM(repaired).stl	54.67 MiB	3 h 32 min 2 m	33 x 35 x 54	Download
	4_body_for_head_in_mask_F DM(repaired).stl	47.10 MiB	2 h 52 min 2 m	34 x 33 x 51	Download
	5_arm_R_FDM(repaired).stl	19.42 MiB	1 h 15 min 1 m	16 x 48 x 67	Download
	6_hand_R_FDM(repaired).st l	15.49 MiB	20 min <1 m	19 x 11 x 23	Download
	7_arm_L_FDM(repaired).stl	20.91 MiB	1 h 11 min <1 m	19 x 44 x 68	Download
	8_hand_L_FDM(repaired).st l	15.09 MiB	20 min <1 m	17 x 12 x 23	Download
	9_leg_L_FDM(repaired).stl	39.50 MiB	4 h 54 min 3 m	41 x 30 x 158	Download
	10_leg_R_FDM(repaired).st l	18.57 MiB	1 h 15 min 1 m	35 x 24 x 49	Download
	11_foot_R_FDM(repaired).s tl	21.61 MiB	1 h 19 min 1 m	19 x 42 x 73	Download
	12_platform_1_FDM(repaire d).stl	10.67 MiB	28 min <1 m	10 x 10 x 78	Download
	13_platform_2_FDM(repaire d).stl	71.78 MiB	38 h 26 min 20 m	117 x 136 x 118	Download
	14_platform_2_without_deb ris_FDM(repaired).stl	82.15 MiB	29 h 8 min 16 m	117 x 131 x 114	Download
	Keychain (repaired).stl	0.35 MiB	23 min <1 m	30 x 30 x 2	Download
	Tag (repaired).stl	1.70 MiB	1 h 18 min 1 m	150 x 18 x 5	Download
...

ABOUT THIS 3D MODEL

One of the bright and memorable Marvel Comics characters is Spider-Gwen. In the alternative-universe version, it is Spider-Gwen who was bitten by the infamous radioactive arachnid and became a superhero. She fearlessly fights against her enemies, including Matt Murdock and Frank Castle Earth-65 versions. Spider-Gwen possesses all the powers of Spider-Man and is fast, agile, powerful, and can stick to walls. The character appeared in several Marvel movies, one of the recent films with Spider-Gwen is Spider-Man: Into the Spider-Verse where Gwen is a student and is a member of Spider-Gang, a group of six versions of Spider-People with similar powers from different alternate dimensions.

Inspired by the female character from the American computer-animated superhero film, Spider-Man: Into the Spider-Verse, our contributing 3D artist created this beautiful figurine. Spider-Gwen is depicted in a flying pose, as she navigates the town sticking to the buildings using her web shooter. The heroine is wearing ballet shoes, which emphasize her grace and fighting style. The figurine can be printed with a face mask and mounted on a platform with city skyscrapers. Spider-Gwen can take a special place in your collection of Marvel superheroes!

ADAPTATION FOR 3D PRINTING

Spider-Gwen for 3D printing is a static assembly model and its moderation and adaptation for different types of 3D printers took the Gambody team 61 hours in total.

For you to receive the cleanest 3D printing result possible, and minimize the amount of filament needed for generated support, the figurine was divided into convenient assembly parts.

All assembly parts in the FFF/FDM 1.0 version are provided in STL files in recommended positions that were worked out in order to ensure the smoothness of the details’ surfaces after printing and that the 3D printing beginners won't face difficulties when placing the parts on a build plate. When downloading any model's file you will also receive "Assembly Manual" for FFF/FDM 1.0 and DLP/SLA 1.0 versions in PDF format. We highly recommend that you get acquainted with the “Assembly video” and "Assembly Manual" before getting down to Spider-Gwen.

The model is saved in STL files, a format supported by most 3D printers. All STL files for 3D printing have been checked in Netfabb and no errors were shown.

The model’s scale was calculated from the height of Spider-Gwen which is 1650 mm. The 3D printing figurine’s chosen scales are 1:8 for the FFF/FDM version and 1:16 for the DLP/SLA version.

VERSIONS’ SPECIFICATIONS

FFF/FDM 1.0 version features:

Contains 14 parts;
A printed model is 240 mm tall, 149 mm wide, 146 mm deep;
Spider-Gwen can be printed with or without the face mask;
Two platform options - with and without Multiverse particles;
All parts are divided in such a way that you will print them with the smallest number of support structures.

DLP/SLA 1.0 version features:

Contains 7 parts;
A printed model is 120 mm tall, 75 wide, 73 mm deep;
Spider-Gwen can be printed with or without the face mask;
Two platform options - with and without Multiverse particles;
All parts are divided in such a way to fit the build plates and to ensure that support structures are generated where needed.

DLP/SLA Eco 1.0 version features:

Contains 7 parts;
A printed model is 120 mm tall, 75 wide, 73 mm deep;
Spider-Gwen can be printed with or without the face mask;
Two platform options - with and without Multiverse particles;
Some parts are manually hollowed out to save resin.

SLS 1.0 version features:

Contains 8 parts;
A solid Spider-Gwen figurine with or without face mask;
4 options for diorama;
Two platform options - with and without Multiverse particles.

You can get the model of Spider-Gwen for 3D Printing immediately after the purchase! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.

Watch the tutorial on how to assemble Spider-Gwen 3D Printing Model on Gambody YouTube channel.

Also, you may like the Spider-Man Game Suit 3D Printing Figurine, and Spider-Man vs Green Goblin 3D Printing Figurines in Diorama.

______

FAQ:

Generic

Below you can find printing recommendations for Cura, Simplify3D, Slic3r and PrusaSlicer software.

Disclaimer: The following printing settings are a recommendation, not an obligation. The parameters can vary depending on the peculiarities of your 3D printer, the material you use, and especially the particular assembly part you are working with. Each part that any model comprises often needs preliminary review, and you are free to tweak the settings the way you find suitable.

Note:

You can scale up the model (downscaling for FFF/FDM 3D printers is not recommended!);
All connectors should be printed at 100% Infill.

Cura printing recommendations:

These are averaged settings which were tested in the Cura 5.2.1 slicer. Test models were printed on Anycubic Vyper, Creality Ender 3 Pro with PLA filament.

To avoid printing problems, we recommend the following settings: download

Simplify3D printing recommendations:

These are averaged settings which were tested in the Simplify3D 5.0.0 slicer. Test models were printed on Anycubic Vyper, FLSUN v400, Ender3 S1 with PLA filament.

To avoid printing problems, we recommend the following settings: download

Slic3r printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in Slic3r 1.3.0 software. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PetG filaments.

To avoid printing problems, we recommend the following settings: download

PrusaSlicer printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in PrusaSlicer 2.3.1. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PETG filaments.

To avoid printing problems, we recommend the following settings: download