Spider-Man vs Green Goblin in Diorama STL files for 3D Printing | Assembly Model

ABOUT THIS 3D MODEL

Friendly neighbourhood Spider-Man has clashed with rogues of all kinds in the course of the character's development but it is the Green Goblin that has always been considered to be Parker's arch-nemesis. Halloween-themed supervillain with his pointy ears and chin plagued the life of Spider-Man and interfered with the fates of Peter Parker's loved ones for many years. It has taken the 3D artist approximately 187 hours to complete the exciting Spider-Man vs Green Goblin scene that is now available for 3D printing. Spider-Man is depicted in his traditional suit while masterly balancing on a piece of a slab that must have broken off a building in the course of the battle. Green Goblin, the 3D printing version of Peter Parker’s ultimate foe, is also shown wearing his original Goblin Armour. Claimed to be one of the most memorable supervillain costumes ever, Goblin Armour comprises special Goblin Gloves, Boots, jester’s hat, a pair of purple shorts, sleeveless shirt and a satchel. As expected, Norman Osborn is fighting the opponent flying on his Goblin Glider that easily resembles a large, metallic bat. In his left hand, the Green Goblin is holding a grenade disguised as a small jack-o'-lantern and he is clearly ready to throw the bomb at the young adversary. Huge smoke puffs that the Goblin Glider leaves behind form a nice platform to mount both Marvel heroes on and present the scene as if in motion.

ADAPTATION FOR 3D PRINTING

Spider-Man vs Green Goblin 3D printing design is a static assembly diorama and its moderation and adaptation for different types of 3D printers took Gambody team 50 hours in total. Both models' anatomy was thoroughly reviewed during the moderation process for the superhero and supervillain to be depicted harmoniously in the intended action poses.

The diorama's cutting was chosen by our team to minimise the amount of filament needed for generated support and some of the parts were hollowed out for you to save resin in the model's Eco version. In order to conceal the places where the assembly parts of the model must be connected, the models were cut along the contour of both characters' suit seams and properly separated from the platform. What is more, in order to ensure an excellent quality of the 3D printed result, such smaller parts as Goblin’s boots, jester’s hat, gloves, bag, its strap, parts of Glider etc. are provided as separate assembly elements. The large platform resembling smoke puffs was divided into several parts in order to fit the build plates of the smallest 3D printers.

All the assembly parts come in STL files in recommended positions that were worked out in order to ensure the smoothness of the details’ surfaces after printing and to make sure that the 3D printing beginners won't face difficulties when placing the parts on a build plate. When downloading any model's file you will also receive "Assembly Manual" for 1.0 FFF/FDM and 1.0 DLP/SLA versions in PDF format.

The design is saved in STL files, a format supported by most 3D printers. All STL files for 3D printing have been checked in Netfabb and no errors were shown.

The model's scale was calculated from Green Goblin's actual height that is 1800 mm. The 3D printing design's chosen scale is 1/8 for the FFF/FDM version and 1/16 for the DLP/SLA/SLS versions.

VERSIONS' SPECIFICATIONS

1.0 FFF/FDM version features:

• Contains 43 parts;
• A printed model is 290 mm tall, 339 mm wide, 336 mm deep;
• Assembly kit includes lock 43_ge_lock_10H(x17) to connect the model's parts securely without glue that needs to be printed 17 times;
• All parts are divided in such a way that you will print them with the smallest number of support structures.

1.0 DLP/SLA version features:

• Contains 17 parts;
• A printed model is 145 mm tall, 170 mm wide, 168 mm deep;
• All parts are divided in such a way to fit the build plates and to ensure that support structures are generated where needed.

1.0 DLP/SLA Eco version features:

• Contains 17 parts;
• A printed model is 145 mm tall, 170 mm wide, 168 mm deep;
• Contains some hollowed out parts to save resin.

1.0 SLS version features:

• Made as a solid one-piece model;
• A printed model is 145 mm tall, 170 mm wide, 168 mm deep;
• Contains 3 parts - a one-piece Spider-Man model and a solid Green Goblin standing on his Glider with the platform separated.

You can get the STL files of Spider-Man vs Green Goblin Diorama​ immediately after the purchase! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.

Watch the tutorial on how to assemble the 3D Printed Spider-Man vs Green Goblin Diorama from the provided 3D Print Files at Gambody YouTube channel.

Also, you may like other Comics 3D Printing Designs.

_______

FAQ:

• Where can I print a model if I have no printer?
• How to get started with 3D printing?
• How to set up my 3D printer?
• How to choose right 3D model print bed positioning?
• How to paint printed model?

Generic

Below you can find printing recommendations for Cura, Bambu Studio, Simplify3D, Slic3r and PrusaSlicer software.

Disclaimer: The following printing settings are a recommendation, not an obligation. The parameters can vary depending on the peculiarities of your 3D printer, the material you use, and especially the particular assembly part you are working with. Each part that any model comprises often needs preliminary review, and you are free to tweak the settings the way you find suitable.

Note:

You can scale up the model (downscaling for FFF/FDM 3D printers is not recommended!);

All connectors should be printed at 100% Infill.

Bambu Lab printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in Bambu Studio 1.9.1. Test models were printed on the Bambu Lab A1, Bambu Lab A1 Mini, Creality Ender 3 S1, Anycubic Kobra 2, and Anycubic Vyper using PLA and PETG filaments.

To avoid printing problems, we recommend the following settings: download

Cura printing recommendations:

These are averaged settings which were tested in the Cura 5.2.1 slicer. Test models were printed on Anycubic Vyper, Creality Ender 3 Pro with PLA filament.

To avoid printing problems, we recommend the following settings: download

Simplify3D printing recommendations:

These are averaged settings which were tested in the Simplify3D 5.0.0 slicer. Test models were printed on Anycubic Vyper, FLSUN v400, Ender3 S1 with PLA filament.

To avoid printing problems, we recommend the following settings: download

Slic3r printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in Slic3r 1.3.0 software. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PetG filaments.

To avoid printing problems, we recommend the following settings: download

PrusaSlicer printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in PrusaSlicer 2.3.1. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PETG filaments.

To avoid printing problems, we recommend the following settings: download