USS Defiant 3D Printing Model | Assembly

ABOUT THIS 3D MODEL

"I think you're going to be surprised at how big a punch this little ship has."

USS Defiant starship, widely popular as the first true Federation warship, deceits the enemy with its petite and streamlined build. But beneath the ablative armour of the unique little warship, unseen firepower is hidden - even the most destructive forces in the entire galaxy should beware!

Meticulously modelled by our contributing 3D artist, the USS Defiant for 3D printing set off the Deep Space 9 station and seeks to join your Star Trek fleet. The pocket battleship can now become an elaborate display piece and inspire fellow Trekkies for new exciting adventures in the 3D printing world.

ADAPTATION FOR 3D PRINTING

USS Defiant for 3D printing is a static assembly model and its moderation and adaptation for different types of 3D printers took the Gambody team 32 hours in total. For you to receive the cleanest 3D printing result possible and to minimize the amount of filament needed for generated support, the starship was divided into many assembly parts using Gambody smart-cutting methods. The model was equipped with tunnels for LED wiring that will make your display interesting and interactive.

All assembly parts in the FFF/FDM 1.0 version are provided in STL files in recommended positions that were worked out in order to ensure the smoothness of the details’ surfaces after printing and that the 3D printing beginners won't face difficulties when placing the parts on a build plate. When downloading any model's file you will also receive "Assembly Manual" for FFF/FDM 1.0 and DLP/SLA 1.0 versions in PDF format. We highly recommend that you get acquainted with the “Assembly video” and "Assembly Manual" before getting down to the USS Defiant model.

The figurine is saved in STL files, a format supported by most 3D printers. All STL files for 3D printing have been checked in Netfabb and no errors were shown.

The model's scale was calculated from the length of the USS Defiant which is 170 000 mm. The 3D printing model's chosen scales are 1/350 for the FFF/FDM version and 1/700 for the DLP/SLA version.

VERSIONS' SPECIFICATIONS

FFF/FDM 1.0 version features:

• Contains 76 parts;
• A printed model is 187 mm tall, 365 mm wide, 487 mm deep;
• Removable panels on the hull and warp nacelles to reveal internal details;
• Detachable warhead module;
• Opening bay door for the shuttle;
• Decorative platform for display;
• Compartments for the optional LED equipment;
• Tunnels for LED wiring to light up the warhead module, warp nacelles, impulse engines, lower deck windows;
• All parts are divided in such a way that you will print them with the smallest number of support structures.

DLP/SLA 1.0 version features:

• Contains 52 parts;
• A printed model is 94 mm tall, 183 mm wide, 243 mm deep
• Removable panels on the hull and warp nacelles to reveal internal details;
• Detachable warhead module;
• Opening bay door for the shuttle;
• Decorative platform for display;
• Compartments for the optional LED equipment;
• Tunnels for LED wiring to light up the warhead module, warp nacelles, impulse engines, lower deck windows;
• All parts are divided in such a way to fit the build plates and to ensure that support structures are generated where needed.

You can get the model of USS Defiant for 3D Printing immediately after the purchase! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.

Watch the tutorial on how to assemble the USS Defiant 3D Printing Model at Gambody YouTube channel.

Also, you may like Star Trek 3D Printing Models, as well as other Space Ships. 

_______

FAQ: 

• Where can I print a model if I have no printer?
• How to get started with 3D printing?
• How to set up my 3D printer?
• How to choose right 3D model print bed positioning? 
• How to paint printed figurine?

Generic

Below you can find printing recommendations for Cura, Bambu Lab, Simplify3D, Slic3r and PrusaSlicer software.

Disclaimer: The following printing settings are a recommendation, not an obligation. The parameters can vary depending on the peculiarities of your 3D printer, the material you use, and especially the particular assembly part you are working with. Each part that any model comprises often needs preliminary review, and you are free to tweak the settings the way you find suitable.

Note:

You can scale up the model (downscaling for FFF/FDM 3D printers is not recommended!);

All connectors should be printed at 100% Infill.

Bambu Lab printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in Bambu Studio 1.9.1. Test models were printed on the Bambu Lab A1, Bambu Lab A1 Mini, Creality Ender 3 S1, Anycubic Kobra 2, and Anycubic Vyper using PLA and PETG filaments.

To avoid printing problems, we recommend the following settings: download

Cura printing recommendations:

These are averaged settings which were tested in the Cura 5.2.1 slicer. Test models were printed on Anycubic Vyper, Creality Ender 3 Pro with PLA filament.

To avoid printing problems, we recommend the following settings: download

Simplify3D printing recommendations:

These are averaged settings which were tested in the Simplify3D 5.0.0 slicer. Test models were printed on Anycubic Vyper, FLSUN v400, Ender3 S1 with PLA filament.

To avoid printing problems, we recommend the following settings: download

Slic3r printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in Slic3r 1.3.0 software. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PetG filaments.

To avoid printing problems, we recommend the following settings: download

PrusaSlicer printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in PrusaSlicer 2.3.1. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PETG filaments.

To avoid printing problems, we recommend the following settings: download