Lord of the Nazgul STL files for 3D Printing | Assembly Model

ABOUT THIS 3D MODEL

Witch-king of Angmar was the leader of Nazgûl, also known as Black Riders, Ringwraiths, The Fallen Kings or simply the Nine. Once the evil lord Sauron together with Eregion Elves forged Rings of Power that were under the complete authority of the One Ring. He gave nine of the rings to Men who were instantly enslaved by their power, stripped of their human names and who later became wraith servants of Sauron’s will. Witch-king was the most powerful of the Nazgûl. He ruled in his own established realm Angmar for over thousands of years and served as Sauron’s second in command. With the immense sorcery powers and the poisonous Black Breath given by the Ring, Witch-king inspired with great terror and sheer despair all the living creatures. During the Battle of Fornost his forces were utterly destroyed, the Angmar leader was exiled and the kingdom soon collapsed. As time went by, Witch-king, as well as the other eight Nazgûl, became even more corrupted in their thraldom to the One Ring. According to the Glorfindel’s prophecy, Witch-king would fall but not by “the hand of man”. And during the battle in Minas Tirith he was indeed defeated by a hobbit and a woman. Hobbit Merry stabbed the Witch King in the leg with the Barrow-blade and Éowyn thrust her sword into his crown, thus killing the lord of the Nazgûl who vanished with a wailing cry.

ADAPTATION FOR 3D PRINTING

The 3D printer model is saved in STL files, a format supported by most 3D printers. All STL files for 3D printing have been checked in Netfabb and no errors were shown.

The model's scale was calculated from Lord of the Nazgul's height which is 2130 mm. The 3D printing design's chosen scale is 1:8 for the FFF/FDM version and 1:16 for the DLP/SLA/SLS versions.

VERSIONS' SPECIFICATIONS

FFF/FDM 1.0 version features:

• Contains 28 parts;
• A printed model is 329 mm tall, 327 mm wide, 181 mm deep​​;
• Assembly kit includes lock 15_Ge_lock_10H_x17 that needs to be printed 17 times;
• All parts are divided in such a way that you will print them with the smallest number of support structures.

DLP/SLA 1.0 version features:

• Contains 11 parts;
• A printed model is 165 mm tall, 164 mm wide, 91 mm deep;
• All parts are divided in such a way to fit the build plates and to ensure that support structures are generated where needed.

DLP/SLA Eco 1.0 version features:

• Contains 11 parts;
• A printed model is 165 mm tall, 164 mm wide, 91 mm deep;
• Contains some hollowed out parts to save resin.

DLP/SLA Pre-supported 1.0 version features:

• Contains 11 parts;
• A printed model is 165 mm tall, 164 mm wide, 91 mm deep;
• The STL files that this version comprises are pre-supported, hollowed out, and have drain holes where needed;
• You may choose to print the STL files one by one or several at once, depending on the dimensions of your resin 3D printer's build plate;
• When slicing several STL files at once, the attachment layers (Platform Touch Shape) may overlap, but the supports must not come into contact.

SLS 1.0 version features:

• Made as a solid one-piece Lord of the Nazgul model;
• A printed model is 165 mm tall, 164 mm wide, 91 mm deep;
• Contains 5 parts - a solid Lord of the Nazgul model + the chain + the model separated from the platform.

You can get the model of Lord of the Nazgul for 3D Printing immediately after the purchase! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.

Watch the tutorial on how to assemble Lord of the Nazgul 3D Printer Model at Gambody YouTube channel.

Also, you may like other Lord of the Rings 3D Printer Models.

_______

FAQ:

• Where can I print a model if I have no printer?
• How to get started with 3D printing?
• How to set up my 3D printer?
• How to choose right 3D model print bed positioning?
• How to paint printed model?

Generic

Below you can find printing recommendations for Cura, Bambu Lab, Simplify3D, Slic3r and PrusaSlicer software.

Disclaimer: The following printing settings are a recommendation, not an obligation. The parameters can vary depending on the peculiarities of your 3D printer, the material you use, and especially the particular assembly part you are working with. Each part that any model comprises often needs preliminary review, and you are free to tweak the settings the way you find suitable.

Note:

You can scale up the model (downscaling for FFF/FDM 3D printers is not recommended!);

All connectors should be printed at 100% Infill.

Bambu Lab printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in Bambu Studio 1.9.1. Test models were printed on the Bambu Lab A1, Bambu Lab A1 Mini, Creality Ender 3 S1, Anycubic Kobra 2, and Anycubic Vyper using PLA and PETG filaments.

To avoid printing problems, we recommend the following settings: download

Cura printing recommendations:

These are averaged settings which were tested in the Cura 5.2.1 slicer. Test models were printed on Anycubic Vyper, Creality Ender 3 Pro with PLA filament.

To avoid printing problems, we recommend the following settings: download

Simplify3D printing recommendations:

These are averaged settings which were tested in the Simplify3D 5.0.0 slicer. Test models were printed on Anycubic Vyper, FLSUN v400, Ender3 S1 with PLA filament.

To avoid printing problems, we recommend the following settings: download

Slic3r printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in Slic3r 1.3.0 software. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PetG filaments.

To avoid printing problems, we recommend the following settings: download

PrusaSlicer printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in PrusaSlicer 2.3.1. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PETG filaments.

To avoid printing problems, we recommend the following settings: download