Wolverine Bust 3D Printing Figurine | Assembly

ABOUT THIS 3D FIGURINE

Wolverine is a powerful mutant who is known to be the best there is at what he does, but what he does best isn't very nice. James Howlett possesses an Adamantium skeleton, regenerative healing factor and superhuman strength. All these supernatural powers plus incredible fighting skills totally justify Wolverine’s status as one of the mightiest X-men representatives. At the same time, Logan has one of the darkest paths of any superhero and is considered by many to be a perfect example of a great comic book antihero. In an attempt to tame the seemingly invincible member of the mutant team, the author of this model for 3d printing spent 78 hours working on the bust version of the hero. Logan is depicted in the mutant’s canonic suit, wearing the mask with remarkable long ears. We can’t see the mutant’s hands but can assume with certainty that his Adamantium metal claws are ready for the battle. The 3D artist definitely did a perfect job working on the Wolverine’s impressive physique - the bust version alone perfectly conveys the ferocity of one of the strongest fighters in the universe. We say that you shouldn’t wait any longer - the fuming Wolverine bust is ready to replenish your 3D printed collection at once.

ADAPTATION FOR 3D PRINTING

Wolverine Bust for 3D printing is a static assembly figurine and its moderation and adaptation for different types of 3D printers took Gambody team 17 hours in total. The accent of the moderation process was made on the figurine’s anatomy review. Both fundamental and advanced body and face proportions rules were taken into account for Wolverine Bust to be depicted harmoniously in the intended angry state. The model’s cutting in its assembly version was chosen by our team to minimise the amount of filament needed for generated support and some of the parts were hollowed out for you to save resin in the bust’s Eco version. For you to achieve the cleanest 3D printed result possible, mutant's shoulder pads, as well as the bust's platform, were separated. All the assembly parts are provided in STL files in recommended positions that were worked out in order to ensure the smoothness of the details’ surfaces after printing and that the 3D printing beginners won't face difficulties when placing the parts on a build plate.

The figurine is saved in STL files, a format supported by most 3D printers. All STL files for 3D printing have been checked in Netfabb and no errors were shown.

The model's scale was calculated from Wolverine's actual height that is 1600 mm. The 3D printing figurine's chosen scale is 1/3 for the FFF/FDM version and 1/6 for the DLP/SLA/SLS versions.

VERSIONS' SPECIFICATIONS

FFF/FDM 1.0 version features:
- Contains 7 parts;
- A printed model is 220 mm tall, 225 mm wide, 138 mm deep;
- Assembly kit includes locks to connect parts of the bust securely without glue. Lock 6_ge_lock_7S(x3)​ needs to be printed 3 times; lock 7_ge_lock_10H(x2) needs to be printed twice;
- All parts are divided in such a way that you will print them with the smallest number of support structures.

DLP/SLA/SLS 1.0 version features:
- Contains 1 part;
- A printed model is 110 mm tall, 113 mm wide, 69 mm deep;

DLP/SLA/SLS Eco 1.0 version features:
- Contains 1 part;
- A printed model is 110 mm tall, 113 mm wide, 69 mm deep;
- The bust is hollowed out to save resin.

WHAT WILL YOU GET AFTER PURCHASE?

- STL files of Wolverine Bust 3D Figurine for 3D printing which consist of 9 parts;
- 3 versions of files for this model for FFF/FDM, DLP/SLA/SLS and DLP/SLA/SLS Eco;
- High-poly detailed figurine of Wolverine Bust​;
- Detailed settings that we provide as a recommendation for Cura , Simplify3D and Slic3r for the best print;
- Full technical support from the Gambody Support Team.

You can get the figurine of Wolverine Bust​ for 3D Printing immediately after the purchase! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.

Watch the tutorial on how to assemble Wolverine Bust​ 3D Printing Figurine at Gambody YouTube channel.

Also, you may like other Wolverine 3D Printing Models as well as other 3D Printing Busts.

_______
FAQ: 
Where can I print a model if I have no printer?
How to get started with 3D printing?
How to set up my 3D printer?
How to choose right 3D model print bed positioning? 
How to paint printed figurine?

Generic

Below you can find printing recommendations for Cura, Bambu Studio, Simplify3D, Slic3r and PrusaSlicer software.

Disclaimer: The following printing settings are a recommendation, not an obligation. The parameters can vary depending on the peculiarities of your 3D printer, the material you use, and especially the particular assembly part you are working with. Each part that any model comprises often needs preliminary review, and you are free to tweak the settings the way you find suitable.

Note:

You can scale up the model (downscaling for FFF/FDM 3D printers is not recommended!);

All connectors should be printed at 100% Infill.

Bambu Lab printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in Bambu Studio 1.9.1. Test models were printed on the Bambu Lab A1, Bambu Lab A1 Mini, Creality Ender 3 S1, Anycubic Kobra 2, and Anycubic Vyper using PLA and PETG filaments.

To avoid printing problems, we recommend the following settings: download

Cura printing recommendations:

These are averaged settings which were tested in the Cura 5.2.1 slicer. Test models were printed on Anycubic Vyper, Creality Ender 3 Pro with PLA filament.

To avoid printing problems, we recommend the following settings: download

Simplify3D printing recommendations:

These are averaged settings which were tested in the Simplify3D 5.0.0 slicer. Test models were printed on Anycubic Vyper, FLSUN v400, Ender3 S1 with PLA filament.

To avoid printing problems, we recommend the following settings: download

Slic3r printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in Slic3r 1.3.0 software. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PetG filaments.

To avoid printing problems, we recommend the following settings: download

PrusaSlicer printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in PrusaSlicer 2.3.1. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PETG filaments.

To avoid printing problems, we recommend the following settings: download