Ring in the New Year, guys. It’s party time! And since we’re wrapping up another successful year, we decided to put together a blog post about most popular 3D Printing and 3D Printed Miniatures that dominated this year.
It’s not an easy task, we must say. There is too much cool stuff that has been shared during these 365 days. You managed to awe and surprise us every time. It is a true joy to see you enjoy 3D printing and share the result with other people as passionate about the technology as we all are.
2017 has truly been a successful year for all of us at Gambody. We were thrilled to learn that one of our models entered Gen Con competition and won Silver. You can read more about it here.
But let’s not deviate from the subject too much and dive into the subject matter.
MARVEL HEROES 3D MINIATURES
Ravager Groot
This one has won our hearts a couple of years ago, with the release of the first installment of the Guardians of the Galaxy. But this year, its popularity peaked as the new episode of the movie showed the baby Groot version. As soon as the movie came out, 3D models of Baby Groot started pouring out on the Internet. The ravage version of otherwise cute Groot holds a special place in our hearts as well.
Ravager Groot 3D printing miniature is broken down into 8 parts to cut down printing materials. It features interchangeable hands and whips and it rests on his own feet without falling over.
Versions: There are two versions both for FFF/FDM and DLP/SLA/SLS 3D printers.
Parts: 8 parts for FFF/FDM and DLP/SLA/SLS printers.
Size: 26 cm wide, 20 cm tall, and 22 cm deep
Printing time: 65 h
Printing material: 40 m
3D Artist: Herb Haruru
3D printed Groot is even better.
Maker: Gambody
Does it require assembly: Yes
Hello! Groot
Another version of Baby Groot, featuring the character in sitting position, came soon after the first one. It is no wonder, however, considering the huge popularity and acclaim the first 3D printing version of Baby Groot received. This miniature is split into 4 parts for an easy 3D printing experience.
Versions: There is a single version only that is suitable to be printed on FFF/FDM and DLP/SLA/SLS 3D printers.
Parts: 4 parts for FFF/FDM/DLP/SLA/SLS printers.
Size: 11 cm wide, 20 cm tall, and 8 cm deep
Printing time: about 10 h
Printing material: 5 m
3D Artist: Herb Haruru
3D printed miniature of waving Groot will make your day every time you will look at it.
Maker: Dobbo Dobson
Does it require assembly: Yes
Wolverine
Wolverine entered our online marketplace at the same time as the movie featuring the character was released. It gained popularity very soon due to the impressive design lines of the 3D model and the pose and features it shows.
This 3D model is special because it depicts the model in his canonic suit.
Versions: Two versions for FFF/FDM and DLP/SLA/SLS 3D printers.
Parts: 11 parts for FFF/FDM and a single part for DLP/SLA/SLS printers.
Size: 24 cm wide, 26 cm tall, and 16 cm deep
Printing time: from 53 h to 75 h
Printing material: from 38 m to 53 m
3D Artist: Solid Maker
SLA 3D printed Wolverine is as great as its prototype.
Maker: vaughnghosindustries
Does it require assembly: Yes
Hulk
Hulk has recently appeared in the new Avengers series, holding a leading part in the movie. It’s been awhile since the last Hulk movie came out, and it’s truly a pity that although this green-skinned humanoid doesn’t receive the acclaim he deserves.
The 3D model shows Hulk in an attack position. It showcases all the power that the hero possesses.
Versions: One version for FFF/FDM/DLP/SLA/SLS 3D printers.
Parts: It is available in a single part.
Size: 139 mm wide, 160 mm tall and 142 mm deep
Printing time: 47 h
Printing material: 32 m
3D Artist: Vertex
Some of our customers were more than happy to share the pictures of their 3D printed Hulk.
Maker: Paulo Ricardo Varella
Does it require assembly: No
Armored Hulk
Armored Hulk 3D model comes to complement your collection of Marvel characters. It features the green humanoid as seen in Thor: Ragnarok movie.
Although we haven’t had the chance to see this model in its full glory, i.e. as 3D printed, we believe that it will not take too long until some pictures of this miniature are shared in our Facebook group.
Until then, however, here are some characteristics of the 3D model to bear in mind.
Versions: Two versions are available to suit all 3D printing enthusiasts: for FFF/FDM and DLP/SLA/SLS 3D printers.
Parts: There are 16 parts for the FDM/FFF 3D printers and only one part for the DLP/SLA/SLS 3D printers.
Size: 470 mm wide, 307 mm tall and 185 mm deep
Printing time: from 51 h to 203 h
Printing material: from 36 m to 133 m
3D Artist: Rodman
ADULT SWIM HEROES 3D MINIATURES
Pickle Rick With Guns
Rick turns himself into a pickle following one of his crazy experiments. The 3D model available on Gambody features the beloved character with and without the gun.
If you’re a fan of the Rick and Morty show, you will want to have this eccentric character in 3D printing form.
Versions: Two versions for FFF/FDM and DLP/SLA/SLS 3D printers.
Parts: 16 parts for FFF/FDM and 6 parts for DLP/SLA/SLS printers.
Size: 11 cm wide, 20 cm tall, and 8 cm deep
Printing time: from 31 h to 65 h
Printing material: from 20 m to 40 m
3D Artist: Solid Maker
SLA 3D printed Pickle Rick looks funny near the pickled cucumber.
Maker: thejubbez
Does it require assembly: Yes
DC HEROES 3D MINIATURES
Wonder Woman
You can definitely see a trend in the 3D miniatures that have been uploaded on Gambody marketplace during the entire year and this trend is related to the release of movies featuring these characters. It is understandable because every movies is accompanied by a wave of interest to everything that is related to it. That is why, our contributing 3D artists didn’t miss the chance to create something that was on demand at a certain time during the year.
Wonder Woman miniature is no exception.The beautiful fighter has finally made it to the 3D printing world.
Versions: One version for all types of 3D printers.
Parts: 10 parts.
Size: 148 mm wide, 209 mm tall and 137 mm deep.
Printing time: 45 h.
Printing material: 22 m.
3D Artist: n/a
And here is how the lady looks like when 3D printed and painted in gold.
Maker: Sercan Güzel
Does it require assembly: Yes
WORLD OF WARCRAFT 3D MINIATURES
Durotan
As a true fan of World of Warcraft, you can’t walk by this 3D printing miniature. You just can’t. Here’s why:
- It features crazy details;
- It is easily printable;
- All your friends will envy you as soon as they see that you have one.
Versions: One version for all types of 3D printers.
Parts: 12 parts including one for the support base.
Size: 252 mm wide, 295 mm tall and 239 mm deep.
Printing time: 243 h.
Printing material: 210 m.
3D Artist: David Knight
To prove you that this fella will print amazingly, here’s a picture.
Maker: _max.silk
Does it require assembly: Yes
Durotan Bust
If you don’t want your friends to have the full-stature Durotan, you can always surprise them with the bust of the character. Scale the 3D model up for more awesomeness and you’ll be the hero of the block.
Versions: Two versions for FDM/FFF and DLP/SLA/SLS 3D printers.
Parts: one part for both versions.
Size: 183 mm wide, 193 mm tall and 130 mm deep.
Printing time: from 7 h to 123 h.
Printing material: from 4 m to 83 m.
3D Artist: David Knight
Illidan
Another World of Warcraft-inspired 3D printing miniature, Illidan replicates accurately the video game character’s demonic side. Be it for tabletop games or simply for your pleasure, Illidan will not disappoint. Featuring interchangeable Twin Blades of Azzinoth, arms, and chains, the model is also supplied with support bases, to satisfy any taste.
Versions: Two versions for FDM/FFF and DLP/SLA/SLS 3D printers.
Parts: 18 parts for the FDM/FFF and only 1 part for the DLP/SLA/SLS version.
Size: FDM version will stand 294 mm tall and the SLA/SLS version – 76 mm tall.
Printing time: from 11 h to 140 h.
Printing material: from 8 m to 94 m.
3D Artist: David Knight
Illidan has been 3D printed several times. You can see the result below.
Maker: Roboto.NYC
Does it require assembly: Yes
WARHAMMER 3D MINIATURES
Vulcan Tank
Tanks have always had a special place in our hearts. We like seeing their entire design replicated for 3D printing. It is amazing what a 3D artist can do to a 3D printing miniature tank.
Vulcan features intricate details that might scare you off at first. But fear not. All the small details are carefully created to be easily printed on your 3D printer. This beast is adapted to be printed on any type of 3D printer without any additional effort from your side. However, before starting 3D printing it, don’t forget to check the Printing Details tab on the model’s page. There’s a lot of printing recommendations you don’t want to miss.
Versions: A single version to suit all FDM/FFF/DLP/SLA/SLS 3D printers.
Parts: 12 parts.
Size: 214 mm wide, 166 mm tall, and 280 mm deep.
Printing time: 234 h.
Printing material: 161 m.
3D Artist: Jamy
If you’re wondering how this beauty looks when 3D printed, here it is.
Makers: Sam Fenimore and Nate Worth
Does it require assembly: Yes
Dreadnought
Dreadnought 3D model conquered your hearts in a very short time. This towering suit is piloted by a man and can cause great damage to the enemy. However, it can also be very peaceful, standing on the shelf or on your desktop and supervising the area from afar.
Fear not if you have this fighter on your side.
Versions: Two versions for FDM/FFF and DLP/SLA/SLS 3D printers.
Parts: 5 and 14 parts.
Size: 170 mm wide, 160 mm tall, and 175 mm deep.
Printing time: 297 h.
Printing material: 191 m.
3D Artist: Hoah J.
Fear not the 3D printed Dreadnought, though. He can’t do any harm.
Maker: Nate Worth and Pedro Rodríguez
Does it require assembly: Yes
STAR WARS DROIDS 3D MINIATURES
K-2SO
After the release of Star Wars: Rogue One movie, the Star Wars miniatures saw a peak in trend. On the wave of Star Wars frenzy, K-2SO was released. This droid really complemented the collection of models for 3D printing that we have on the marketplace as no other similar model has been previously available on the website. It soon became very popular among the Star Wars fans and not only.
Versions: Only one version available for FDM/FFF/DLP/SLA/SLS 3D printers.
Parts: 16 parts.
Size: 82 mm wide, 178 mm tall and 69 mm deep.
Printing time: 41 h.
Printing material: 35 m.
3D Artist: Elyiot
This 3D printed K-2SO stepped out right of the computer screen to check on you, dude.
Maker: Paulo Ricardo Varella
Does it require assembly: Yes
R2-D2
Probably one of the cutest Star Wars characters in the entire saga, R2-D2 doesn’t need introduction. He’s the small robot that has the answer to all the questions. And he can be a true friend as well.
For the Star Wars die-hards, Zelman Heifetz made this 3D printing miniature with 5 changeable heads and 3 changeable arms for the FDM version and 7 different versions for the SLS/SLA version.
Versions: Two versions for FDM/FFF and DLP/SLA/SLS 3D printers.
Parts: 49 parts for the FDM version and single part but available in 7 different variants for the SLA version.
Size: The FDM version will stand 132 mm tall, while the SLA one is smaller in size, standing only 70 mm tall.
Printing time: more than 70 h.
Printing material: from 37 m to 59 m.
3D Artist: Zelman Heifetz
Check how R2-D2 looks in all its 3D printing glory.
Maker: Gambody
Does it require assembly: Yes
STAR WARS SHIPS 3D MINIATURES
Hammerhead Corvette
No annual roundup is complete without a spaceship. This year, the spaceship that awed us and you was Hammerhead Corvette. Amazing scale and details have added to this miniature’s popularity.
Who could resist this beast and not 3D print it? It will stand 42 m long. It requires many 3D printing hours but it’s totally worth it.
Stock on 3D printing material as well, because as you can imagine, a 42 meters-long 3D printing model requires a lot of it.
Versions: One version for FDM/FFF/DLP/SLA/SLS 3D printers.
Parts: 28 parts.
Size: 209 mm wide, 175 mm tall and 420 mm deep.
Printing time: > 100 h.
Printing material: > 100 m.
3D Artist: cosmic
Although scaled down, Hammerhead Corvet 3D print looks just as cool.
Maker: Ben Jackson
Does it require assembly: Yes
TITANFALL 3D MINIATURES
Battle Robot Atlas Titan
Atlas Titan came at the right time to diversify the MechWarrior craziness. It is also a battle robot but it takes a different approach to design.
The video game replica is provided with ball joints to facilitate its workability.
Versions: One version for FDM/FFF/DLP/SLA/SLS 3D printers.
Parts: 28 parts.
Size: 209 mm wide, 350 mm tall, and 170 mm deep.
Printing time: > 100 h.
Printing material: > 100 m.
3D Artist: Jimmy Adam
We couldn’t leave this 3D printing miniature unnoticed and 3D printed it in-house. Here are some pictures of the result.
Maker: Gambody
Does it require assembly: Yes
Titanfall Militia Pilot and Weapons
And because you’re already used to the fact that bipedal vehicles are almost always accompanied by add-ons, for this one additional weapon and a pilot have been created.
The pilot is featured in sitting and standing position. You can place it in the cockpit or next to the battle robot.
The weapons consist of 4 different rifles.
Versions: One version for FDM/FFF/DLP/SLA/SLS 3D printers.
Parts: 13 separate parts.
Size: all add-ons are proportional to the bipedal robot.
Printing time: about 100 h.
Printing material: 68 m.
3D Artist: Jimmy Adam
STARCRAFT 3D MINIATURES
Ultralisk
After the scary Hydralisk, it was the turn of Ultralisk to bring terror. Scary creature from the world of StarCraft, Ultralisk is known to be able to cut through any living substance.
The 3D printing one might not be dangerous, but you might get goosebumps just looking at it.
Versions: 2 versions – for FFF/FDM and DLP/SLA/SLS 3D printers.
Parts: Version 1 is split into 46 parts and version 2 consists of a single STL file.
Size: FDM version will stand 277 mm tall and SLS version will stand only 157 mm tall.
Printing time: from 109 h to 430 h.
Printing material: from 76 m to 290 m.
Maker: Jeffrey Ribeiro
We could hardly wait to see this monster 3D printed and painted and finally it happened.
Maker: 황수현
Does it require assembly: Yes
Siege Tank
This might look like a tank, but its design makes it different from his pierce. The tank is known to work in two modes: attack and siege.
The replica is workable, featuring rotating turret, moveable parts, and others. Check the specifications below for more details on its 3D printing
Versions: FFF/FDM and DLP/SLA/SLS 3D printers.
Parts: 83 parts for FFF/FDM and only 4 parts for DLP/SLA/SLS version.
Size: The size varies for each version and depending on the mode you want to display the tank.
Printing time: from 36 h to > 100 h.
Printing material: from 13 m to > 100 m.
3D Artist: Silvester
3D printed Siege Tank is ready to attack.
Maker: Gambody
Does it require assembly: Yes
MECHWARRIOR 3D MINIATURES
Mad Cat MkII
Mad Cat is the classic MechWarrior that brings good memories to the fans. The model keeps the original V-shaped position of the Mech. It features a rotating torso and workable arms and feet.
Versions: Two versions for FFF/FDM and DLP/SLA/SLS 3D printers.
Parts: 42 parts for FFF/FDM and 12 parts for DLP/SLA/SLS version.
Size: FDM version will stand 293 mm tall and SLA version – 176 mm tall.
Printing time: > 100 h.
Printing material: > 100 m.
3D Artist: Maverik
We would have been surprised if this one was not 3D printed by anyone.
Maker: Ross Sage
Does it require assembly: Yes
Mad Cat Mk II Weapon Kit
To add a little more fun, there’s a 3D printing kit consisting of additional weapons that can be mounted on the regular Mad Cat Ml II miniature.
Versions: Two versions for FFF/FDM and DLP/SLA/SLS 3D printers.
Parts: 44 parts for FFF/FDM and 12 parts for DLP/SLA/SLS version.
Size: All parts are proportional to the regular Mech.
Printing time: from 20 h to about 100 h.
Printing material: from 12 m to 95 m.
3D Artist: Maverik
TRANSFORMERS 3D MINIATURES
Transformers 5 Megatron
Megatron 3D printing miniature is inspired by the robot with the same name from the most recent Transformers movie. Like all robots, this one really made his way into your hearts fast.
If you’re out of ideas for Christmas gifts, even the STL files for this one will win you the title of the best friend ever.
Versions: One version for FFF/FDM/DLP/SLA/SLS 3D printers.
Parts: 11 parts.
Size: 195 mm wide, 244 mm tall, and 195 mm deep.
Printing time: 121 h.
Printing material: 71 m.
3D Artist: Jason Burrows
Megatron has never been more prepared for battle.
Maker: Damian Lawrence
Does it require assembly: Yes
TANKS 3D PRINTING MINIATURES
Tank M1A2 Abrams Tusk
Get two 3D printing miniatures in a single STL files kit. The trick is that this tank comes with two different armors, which you can replace as you please.
Versions: one set of STL files for FFF/FDM and DLP/SLA/SLS 3D printers.
Parts: an impressive 84 parts to print out.
Size: 95 mm tall, 132 mm wide, 285 mm deep.
Printing time: > 50 h.
Printing material: 144 m.
Maker: Silvester
3D printed Tank M1A2 Abrams Tusk looks like a true miniature of the famous war vehicle.
Maker: roboto.nyc
Does it require assembly: Yes
BATTLEFIELD 3D MINIATURES
Patrol Boat 31 Mk 2
The only 3D model of its kind on our marketplace. It is most likely that its popularity is due to the fact that it has no competition here. And when you’re one of a kind, you kinda stand out from the crowd.
Versions: There’s only one version for FFF/FDM and DLP/SLA/SLS 3D printers.
Parts: The model is split into 31 parts that don’t require glue.
Size: 16 cm tall.
Printing time: 117 h.
Printing material: about 90 m.
3D Artists: Lucas Blake
Conclusion
This is it for 2017. We all hope that you enjoyed this year as much as we did and that it brought you a lot of good 3D printing models. Our only hope is that 2018 will be no less fruitful and enjoyable.
Merry Christmas! Happy New Year! See you next year!
Best Star Trek 3D Printing Models
Read Article
3D Printed Miniatures Pick of the Month
Read Article