Baby Yoda Halloween STL Files for 3D Printing | Assembly Model

ABOUT THIS 3D MODEL

This adorable and powerful Force-sensitive Jedi needs no introduction! Although Baby Yoda joined the Star Wars franchise fairy recently, the tiny star of The Mandalorian TV series melted the hearts of fans across the galaxy in a matter of seconds and swiftly made its way onto the shelves of collectors all over the world.

Being a joyful little Child, Grogu is keen on joining any party in the neighbourhood. No wonder trick-or-treating got him the most exciting! Another Baby Yoda 3D model to join Gambody catalogue of 3D printing models is fully prepared to be invited to your Halloween celebrations. The 3D printing Grogu wears a large witch hat perfect for the occasion and holds a small pumpkin with an evil face carved in it. You may choose to display the thematic 3D printed design amid your Halloween display or you may turn the 3D printing Child 3D print model into an excellent Halloween gift!

ADAPTATION FOR 3D PRINTING

Baby Yoda Halloween 3D printing design is a static assembly model and its moderation and adaptation for different types of 3D printers took Gambody team 27 hours in total. Baby’s child-like anatomy and proportions were thoroughly reviewed during the moderation process for the model to be depicted harmoniously in the intended pose. 

The model’s cutting in its assembly version was chosen by our team to minimise the amount of filament needed for generated support and some of the parts were hollowed out for you to save resin in Baby Yoda’s Eco version. In order to conceal the places where assembly parts of the model must be connected, the tiny hero was cut along the contour of his little robe seams. For you to achieve the cleanest result possible such parts as model's feet, hands, sleeves, a Halloween hat, ears and a carved pumpkin are provided as separate files. The model’s rocky platform was divided into four parts to fit the build plates of the average 3D printers. 

All assembly parts in the 1.0 FFF/FDM version are provided in STL files in recommended positions that were worked out in order to ensure the smoothness of the details’ surfaces after printing and that the 3D printing beginners won't face difficulties when placing the parts on a build plate. When downloading any model's file you will also receive "Assembly Manual" for 1.0 FFF/FDM and 1.0 DLP/SLA versions in PDF format.

The 3D print model is saved in STL files, a format supported by most 3D printers. All STL files for 3D printing have been checked in Netfabb and no errors were shown.

The model's scale was calculated from Baby Yoda's actual height that is 405 mm. The 3D printing design's chosen scale is 1/2 for the FFF/FDM version and 1/4 for the DLP/SLA/SLS versions.

VERSIONS' SPECIFICATIONS

1.0 FFF/FDM version features:

• Contains 18 parts;
• A printed model is 283 mm tall, 237 mm wide, 198 mm deep​;
• Comes with a conical witch hat. Credit for the creation of the hat goes to MakerBot; 
• The assembly kit includes locks to attach the model's legs to the body securely without glue. Lock 17_ge_lock_7S(x9) needs to be printed 9 times; lock 18_ge_lock_10H(x8) needs to be printed 8 times;
• All parts are divided in such a way that you will print them with the smallest number of support structures.

1.0 DLP/SLA version features:

• Contains 9 parts;
• A printed model is 142 mm tall, 119 mm wide, 99 mm deep;
• Comes with a conical witch hat. Credit for the creation of the hat goes to MakerBot;
• All parts are divided in such a way to fit the build plates and to ensure that support structures are generated where needed.

1.0 DLP/SLA Eco version features:

• Contains 9 parts;
• A printed model is 142 mm tall, 119 mm wide, 99 mm deep;
• Comes with a conical witch hat. Credit for the creation of the hat goes to MakerBot;
• Contains some hollowed out parts to save resin.

1.0 SLS version features:

• Made as a solid one-piece Baby Yoda Halloween model;
• A printed model is 142 mm tall, 119 mm wide, 99 mm deep;
• Comes with a conical witch hat. Credit for the creation of the hat goes to MakerBot; 
• Contains 3 parts - a one-piece Baby Yoda model and the model with the platform separated.

You can get the STL Files of Baby Yoda Halloween 3D Print Model immediately after the purchase! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.

Watch the tutorial on how to assemble the 3D Printed Baby Yoda Halloween Model from the provided 3D Print Files at Gambody YouTube channel.

Also, you may like other Star Wars 3D Print Models, as well as other TV Series 3D Printing Designs.

_______

FAQ:

• Where can I print a model if I have no printer?
• How to get started with 3D printing?
• How to set up my 3D printer?
• How to choose right 3D model print bed positioning?
• How to paint printed model?

Generic

Below you can find printing recommendations for Cura, Bambu Studio, Simplify3D, Slic3r and PrusaSlicer software.

Disclaimer: The following printing settings are a recommendation, not an obligation. The parameters can vary depending on the peculiarities of your 3D printer, the material you use, and especially the particular assembly part you are working with. Each part that any model comprises often needs preliminary review, and you are free to tweak the settings the way you find suitable.

Note:

You can scale up the model (downscaling for FFF/FDM 3D printers is not recommended!);

All connectors should be printed at 100% Infill.

Bambu Lab printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in Bambu Studio 1.9.1. Test models were printed on the Bambu Lab A1, Bambu Lab A1 Mini, Creality Ender 3 S1, Anycubic Kobra 2, and Anycubic Vyper using PLA and PETG filaments.

To avoid printing problems, we recommend the following settings: download

Cura printing recommendations:

These are averaged settings which were tested in the Cura 5.2.1 slicer. Test models were printed on Anycubic Vyper, Creality Ender 3 Pro with PLA filament.

To avoid printing problems, we recommend the following settings: download

Simplify3D printing recommendations:

These are averaged settings which were tested in the Simplify3D 5.0.0 slicer. Test models were printed on Anycubic Vyper, FLSUN v400, Ender3 S1 with PLA filament.

To avoid printing problems, we recommend the following settings: download

Slic3r printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in Slic3r 1.3.0 software. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PetG filaments.

To avoid printing problems, we recommend the following settings: download

PrusaSlicer printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in PrusaSlicer 2.3.1. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PETG filaments.

To avoid printing problems, we recommend the following settings: download