Chaplain 40k 3D Printing Figurine | Assembly

HISTORY OF CHAPLAIN

Chaplain is a spiritual leader of the Chapters of Adeptus Astartes or Space Marines. In battle, Chaplain fights alongside his brothers Marines and recites Liturgies inspiring warriors to great feats. His appearance alone casts horror and fear over the Chapters’ enemies. Chaplain shows up in the hottest spots where he instils the Marine’s minds with his unfailing allegiance and fury. He always goes straight on believing that war in the name of the Emperor is the best proof of loyalty to him. While fighting Chaplain destroys enemies with joy and exultation, offering prayers to the Emperor and the founder of the Order.

ABOUT THIS 3D FIGURINE

This model for 3D printing was inspired by works of the artist Pavel Zolot’ko.

This model has an update that includes 2 new versions: FFF/FDM/DLP/SLA 1.1 and SLS 1.0. Now this model is adapted for all types of 3D printers and has scale 1/16 for 2 new versions. The model is saved in STL files, a format is supported by most 3D printers. 

FFF/FDM 1.0 version features:
- Contains 5 parts;
- Made with a large banner of Space Marines;
- Made with laser weapon;

DLP/SLA 1.0 version features:
- Same as FDM 1.0 but contains more details for comfortable printing of individual parts;

FFF/FDM/DLP/SLA 1.1 version features:
- Contains 12 parts;
- Made with new cutting for comfort printing;
- Made with 2 variants of platform/ Solid and divided into 2 pieces;
- Made with increased detailing;
- All parts are divided in such a way that you will print them with the smallest number of support structures.

SLS 1.0 version features:
- Same as FFF/FDM/DLP/SLA 1.1 but made as 1 part.

All STL files for 3D printing have been checked in Netfabb and no errors were shown.

Note: Before starting 3D printing the model, read the Printing Details for Cura, Simplify3D or Slic3r Software.

There are 19 parts for FFF/FDM version, 6 parts for DLP/SLA and for DLP/SLA Eco versions, 1 part for SLS version.

Scale: Chaplain actual height is 3000 mm. The model’s chosen scale is 1/16 for the FFF/FDM/DLP/SLA 1.1 and SLS 1.0 versions.

Old FFF/FDM 1.0 version dimensions (no scale):
A printed model is 371 mm tall, 172 mm wide, 172 mm deep;

Old DLP/SLA 1.0 version dimensions (no scale):
A printed model is 371 mm tall, 172 mm wide, 172 mm deep;

FFF/FDM/DLP/SLA 1.1 version dimensions (1/16 scale):
A printed model is 252 mm tall, 164 mm wide, 139 mm deep;

SLS 1.0 version dimensions (1/16 scale):
A printed model is 252 mm tall, 164 mm wide, 139 mm deep;
- Has few details, to keep printing costs down.

WHAT WILL YOU GET AFTER PURCHASE?

- STL files of Chaplain  3D Figurine for 3D printing which consist of 26 parts;
- 4 versions of files for this model for FFF/FDM 1.0, DLP/SLA 1.0, FFF/FDM/DLP/SLA 1.1 and SLS;
- High-poly detailed figurine of Chaplain ;
- Detailed settings that we provide for Cura , Simplify3D and Slic3r for the best print;
- Full technical support from the Gambody Support Team.

You can get Model of Chaplain for 3D Printing right now! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.

Watch the tutorial on how to assemble Chaplain 3D Printing Figurine at Gambody YouTube channel.

Also, you may like other Warhammer 3D Printing Figurines.

_______
FAQ: 
Where can I print a model if I have no printer?
How to get started with 3D printing?
How to set up my 3D printer?
How to choose right 3D model print bed positioning? 
How to paint printed figurine?

Generic

Below you can find printing recommendations for Cura, Bambu Lab, Simplify3D, Slic3r and PrusaSlicer software.

Disclaimer: The following printing settings are a recommendation, not an obligation. The parameters can vary depending on the peculiarities of your 3D printer, the material you use, and especially the particular assembly part you are working with. Each part that any model comprises often needs preliminary review, and you are free to tweak the settings the way you find suitable.

Note:

You can scale up the model (downscaling for FFF/FDM 3D printers is not recommended!);

All connectors should be printed at 100% Infill.

Bambu Lab printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in Bambu Studio 1.9.1. Test models were printed on the Bambu Lab A1, Bambu Lab A1 Mini, Creality Ender 3 S1, Anycubic Kobra 2, and Anycubic Vyper using PLA and PETG filaments.

To avoid printing problems, we recommend the following settings: download

Cura printing recommendations:

These are averaged settings which were tested in the Cura 5.2.1 slicer. Test models were printed on Anycubic Vyper, Creality Ender 3 Pro with PLA filament.

To avoid printing problems, we recommend the following settings: download

Simplify3D printing recommendations:

These are averaged settings which were tested in the Simplify3D 5.0.0 slicer. Test models were printed on Anycubic Vyper, FLSUN v400, Ender3 S1 with PLA filament.

To avoid printing problems, we recommend the following settings: download

Slic3r printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in Slic3r 1.3.0 software. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PetG filaments.

To avoid printing problems, we recommend the following settings: download

PrusaSlicer printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in PrusaSlicer 2.3.1. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PETG filaments.

To avoid printing problems, we recommend the following settings: download