Enterprise NX-01 Refit STL Files for 3D Printing | Assembly Model

ABOUT THIS 3D MODEL

The Enterprise NX-01 Refit represents the pinnacle of early Star Trek innovation. After its courageous service in the Xindi conflict and the Romulan War, this NX-class starship returned to Spacedock in 2155 for a comprehensive overhaul. The refit added an underslung secondary hull—housing a larger navigational deflector dish and photonic torpedo launchers—bringing its silhouette in line with the classic Star Trek starship profiles. Updated impulse nacelles and an enhanced warp coil array boosted its performance, while subtle hull modifications signaled the dawn of humanity's deeper ventures into the galaxy. The Star Trek Enterprise NX-01 Refit stands as a testament to Starfleet's evolving technological prowess on its way to Federation status.

Prepare to command this legendary spacecraft in your own collection with the premium NX-01 Refit 3D model! Our contributing artist has faithfully recreated every contour—from the sleek lines of the saucer to the detailed struts of the secondary hull—in a versatile Star Trek ship 3D print model. Choose between three hull options—lettered "Enterprise NX-01", "Columbia NX-02" or a clean version—and utilize the integrated LED tunnels to illuminate your 3D printed spaceship with a vibrant glow. Perfect for aficionados of Star Trek 3D models and sci-fi enthusiasts, this NX-01 Refit model brings the future of early space exploration to your desktop.

ADAPTATION FOR 3D PRINTING

Enterprise NX-01 Refit 3D printing design is a static assembly model and its moderation and adaptation for different types of 3D printers took the Gambody team 101 hours in total.

For you to receive the cleanest 3D printing result possible, minimize the amount of filament needed for generated support, and make use of the active elements designed by Gambody Engineers, the starship was divided into convenient assembly parts.

All assembly parts in the 1.0 FFF/FDM version are provided in STL files in recommended positions that were worked out in order to ensure the smoothness of the details’ surfaces after printing and that the 3D printing beginners won’t face difficulties when placing the parts on a build plate. When downloading any model’s file you will also receive “Assembly Manual” for 1.0 FFF/FDM and 1.0 DLP/SLA versions in PDF and video formats. We highly recommend that you get acquainted with the "Assembly Video" and "Assembly Manual" before getting down to the Enterprise NX-01 Refit.

The 3D print model is saved in STL files, a format supported by most 3D printers. All STL files for 3D printing have been checked in Netfabb and no errors were shown.

The model's scale was calculated from the length of the starship. The 3D printing design's chosen scales are 1:350 for the FFF/FDM version and 1:700 for the DLP/SLA version.

VERSIONS’ SPECIFICATIONS

FFF/FDM 1.0 version features:

• Contains 61 parts;
• A printed model is 118 mm tall, 280 mm wide, 481 mm deep;
• A printed model with a stand is 155 mm tall, 280 mm wide, 481 mm deep;
• Three hull options: one with "Enterprise NX-01", one with "Columbia NX-02", and a clean version;
• There are tunnels for LED wiring;
• All parts are divided in such a way that you will print them with the smallest number of support structures.

DLP/SLA 1.0 version features:

• Contains 43 parts;
• A printed model is 59 mm tall, 140 mm wide, 240 mm deep;
• A printed model with a stand is 78 mm tall, 140 mm wide, 240 mm deep;
• Three hull options: one with "Enterprise NX-01", one with "Columbia NX-02", and a clean version;
• There are tunnels for LED wiring;
• All parts are divided in such a way to fit the build plates and to ensure that support structures are generated where needed.

You can get the STL files of Enterprise NX-01 Refit model for 3D printing immediately after the purchase! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.

Watch the tutorial on how to assemble the 3D Printed Enterprise NX-01 Refit Model from the provided 3D Print Files on Gambody YouTube channel.

Also, you may like the Enterprise NX-01 3D Print Model and other Spacecraft 3D Printing Designs.

________

FAQ: 

• Where can I print a model if I have no printer?
• How to get started with 3D printing?
• How to set up my 3D printer?
• How to choose right 3D model print bed positioning? 
• How to paint printed model?

Generic

Below you can find printing recommendations for Cura, Bambu Studio, Simplify3D, Slic3r and PrusaSlicer software.

Disclaimer: The following printing settings are a recommendation, not an obligation. The parameters can vary depending on the peculiarities of your 3D printer, the material you use, and especially the particular assembly part you are working with. Each part that any model comprises often needs preliminary review, and you are free to tweak the settings the way you find suitable.

Note:

You can scale up the model (downscaling for FFF/FDM 3D printers is not recommended!);

All connectors should be printed at 100% Infill.

Bambu Lab printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in Bambu Studio 1.9.1. Test models were printed on the Bambu Lab A1, Bambu Lab A1 Mini, Creality Ender 3 S1, Anycubic Kobra 2, and Anycubic Vyper using PLA and PETG filaments.

To avoid printing problems, we recommend the following settings: download

Cura printing recommendations:

These are averaged settings which were tested in the Cura 5.2.1 slicer. Test models were printed on Anycubic Vyper, Creality Ender 3 Pro with PLA filament.

To avoid printing problems, we recommend the following settings: download

Simplify3D printing recommendations:

These are averaged settings which were tested in the Simplify3D 5.0.0 slicer. Test models were printed on Anycubic Vyper, FLSUN v400, Ender3 S1 with PLA filament.

To avoid printing problems, we recommend the following settings: download

Slic3r printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in Slic3r 1.3.0 software. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PetG filaments.

To avoid printing problems, we recommend the following settings: download

PrusaSlicer printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in PrusaSlicer 2.3.1. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PETG filaments.

To avoid printing problems, we recommend the following settings: download