Eta-2 Actis Interceptor 3D Printing Model | Assembly + Action

ABOUT THIS 3D MODEL

The Eta-2 Actis-class interceptor used by the Jedi during the Clone Wars is characterized by impressive firepower superior to the capabilities of its predecessor Delta-7. The crew of Actis included a pilot and an astromech droid responsible for navigation and repair assistance, and its armament consisted of different modifications of cannons, launchers, and missiles. This maneuverable vessel was used by Anakin Skywalker and Obi-Wan Kenobi during the crucial Battle of Coruscant and this is the Battle of Coruscant where agile Eta-2 demonstrated their great potential and high efficiency.

Eta-2 Actis Interceptor is a result of the mastery of Gambody contributing 3D artist who fully dedicated themself to the work on the project. The author managed to recreate the unique design of the fighter and implemented several features that allow every 3D printing fan to show their creativity and make their project special and inimitable. Experiment with scale, painting, printing materials, and lighting — these STLs are made to give you the freedom of self-expression!

ADAPTATION FOR 3D PRINTING

Eta-2 Actis Interceptor model for 3D printing is an active assembly model and its moderation and adaptation for different types of 3D printers took the Gambody team 55 hours in total.

For you to receive the cleanest 3D printing result possible, minimize the amount of filament needed for generated support, and make use of the active elements designed by Gambody Engineers, the fighter was divided into convenient assembly parts.

All assembly parts in the FFF/FDM 1.0 version are provided in STL files in recommended positions that were worked out in order to ensure the smoothness of the details’ surfaces after printing and that the 3D printing beginners won’t face difficulties when placing the parts on a build plate. When downloading any model’s file you will also receive “Assembly Manual” for FFF/FDM 1.0 and DLP/SLA 1.0 versions in PDF and video formats. We highly recommend that you get acquainted with the “Assembly Video” and “Assembly Manual” before getting down to the Eta-2 Actis Interceptor 3D printing model.

The model is saved in STL files, a format supported by most 3D printers. All STL files for 3D printing have been checked in Netfabb and no errors were shown.

The model’s scale was calculated from the length of the Actis which is 5500 mm. The 3D printing model’s chosen scales are 1:16 for the FFF/FDM version and 1:34 for the DLP/SLA version.

VERSIONS’ SPECIFICATIONS

FFF/FDM 1.0 version features:

• Contains 28 parts;
• A printed model is 184 mm tall, 276 mm wide, 340 mm deep;
• A printed model on the platform is 189 mm tall, 276 mm wide, 340 mm deep;
• Movable S-foils;
• 2 variants of window inserts — glass parts and frames;
• Removable rear hatch to access the battery;
• Highly-detailed cockpit design;
• Tunnels for LED wiring;
• All parts are divided in such a way that you will print them with the smallest number of support structures.

DLP/SLA 1.0 version features:

• Contains 21 parts;
• A printed model is 84 mm tall, 134 mm wide, 165 mm deep;
• A printed model on the platform is:  92 mm tall, 134 mm wide, 165 mm deep;
• Movable S-foils;
• 2 variants of window inserts — glass parts and frames;
• Removable rear hatch to access the battery;
• Highly-detailed cockpit design;
• Tunnels for LED wiring;
• All parts are divided in such a way to fit the build plates and to ensure that support structures are generated where needed.

You can get the Eta-2 Actis Interceptor model for 3D printing immediately after the purchase! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.

Watch the tutorial on how to assemble Eta-2 Actis Interceptor 3D Printing Model on Gambody YouTube channel.

Also, you may like other Spacecraft 3D Printing Models.

________

FAQ: 

• Where can I print a model if I have no printer?
• How to get started with 3D printing?
• How to set up my 3D printer?
• How to choose right 3D model print bed positioning? 
• How to paint printed figurine?

Generic

Below you can find printing recommendations for Cura, Bambu Lab, Simplify3D, Slic3r and PrusaSlicer software.

Disclaimer: The following printing settings are a recommendation, not an obligation. The parameters can vary depending on the peculiarities of your 3D printer, the material you use, and especially the particular assembly part you are working with. Each part that any model comprises often needs preliminary review, and you are free to tweak the settings the way you find suitable.

Note:

You can scale up the model (downscaling for FFF/FDM 3D printers is not recommended!);

All connectors should be printed at 100% Infill.

Bambu Lab printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in Bambu Studio 1.9.1. Test models were printed on the Bambu Lab A1, Bambu Lab A1 Mini, Creality Ender 3 S1, Anycubic Kobra 2, and Anycubic Vyper using PLA and PETG filaments.

To avoid printing problems, we recommend the following settings: download

Cura printing recommendations:

These are averaged settings which were tested in the Cura 5.2.1 slicer. Test models were printed on Anycubic Vyper, Creality Ender 3 Pro with PLA filament.

To avoid printing problems, we recommend the following settings: download

Simplify3D printing recommendations:

These are averaged settings which were tested in the Simplify3D 5.0.0 slicer. Test models were printed on Anycubic Vyper, FLSUN v400, Ender3 S1 with PLA filament.

To avoid printing problems, we recommend the following settings: download

Slic3r printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in Slic3r 1.3.0 software. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PetG filaments.

To avoid printing problems, we recommend the following settings: download

PrusaSlicer printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in PrusaSlicer 2.3.1. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PETG filaments.

To avoid printing problems, we recommend the following settings: download