Premium Stock

T-60 Power Armor 3D Printing Model | Assembly

(22)
cm: 22.1 w x 29.5 d x 33.5 h
in: 8.701 w x 11.614 d x 13.189 h

Source Files

|

Description

|

Printing Details

This 3D figurine of T-60 Power Armor consists of files in StereoLithography (.Stl) format that is optimized for 3D printing.

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

WHAT WILL YOU GET AFTER PURCHASE?

  • 9 versions of T-60 Power Armor STL files for FFF/FDM, DLP/SLA, DLP/SLA Eco, SLS - files for all versions are available for download after the purchase;
  • STL files of high-poly T-60 Power Armor Figurine for 3D printing consist of 155 files;
  • Sizes for:
  • FFF/FDM: 341 mm tall, 226 mm wide, 302 mm deep;
  • DLP/SLA/SLS: 171 mm tall, 113 mm wide, 151 mm deep;
  • Assembly Manual for FFF/FDM 2.0 and DLP/SLA 2.0 versions in PDF and video formats;
  • Detailed settings that we provide as a recommendation for Cura, Simplify3D, Slic3r and PrusaSlicer for the best print;
  • Full technical support from the Gambody Support Team.

Detailed information about this 3D printing model is available in the DESCRIPTION section.

File Name File Size Time / Filament Object Size
(x/y/z mm)
1_head_FDM(repaired).stl
20.56 MiB 4 h 41 min 2 m 44 x 57 x 37 Download
2_body_FDM(repaired).stl
29.55 MiB 22 h 21 min 13 m 78 x 97 x 86 Download
3_legs_FDM(repaired).stl
28.41 MiB 18 h 6 min 10 m 79 x 66 x 86 Download
4_arm_R_FDM(repaired).stl
15.74 MiB 5 h 26 min 3 m 63 x 43 x 70 Download
5_hand_R_FDM(repaired).st l
11.91 MiB 1 h 25 min 1 m 21 x 26 x 42 Download
6_arm_L_FDM(repaired).stl
15.75 MiB 5 h 29 min 3 m 66 x 44 x 67 Download
7_hand_L_FDM(repaired).st l
11.98 MiB 1 h 26 min 1 m 20 x 25 x 43 Download
8_leg_R_FDM(repaired).stl
19.76 MiB 14 h 30 min 8 m 49 x 82 x 122 Download
9_leg_L_FDM(repaired).stl
19.77 MiB 14 h 49 min 8 m 49 x 82 x 123 Download
10_shoulder_strap_R_FDM(r epaired).stl
10.64 MiB 4 h 37 min 3 m 47 x 58 x 40 Download
11_shoulder_strap_L_FDM(r epaired).stl
10.65 MiB 4 h 38 min 3 m 48 x 58 x 39 Download
12_lantern_1_FDM(repaired ).stl
1.97 MiB 6 min <1 m 5 x 5 x 14 Download
13_lantern_2_FDM(repaired ).stl
3.62 MiB 12 min <1 m 10 x 10 x 14 Download
14_tube_1_FDM(repaired).s tl
6.49 MiB 19 min <1 m 14 x 50 x 9 Download
15_tube_2_FDM(repaired).s tl
6.27 MiB 18 min <1 m 14 x 49 x 9 Download
16_handhold_1_FDM(repaire d).stl
0.67 MiB 3 min <1 m 19 x 6 x 3 Download
17_handhold_2_FDM(repaire d).stl
0.67 MiB 3 min <1 m 19 x 6 x 3 Download
18_handhold_3_FDM(repaire d).stl
1.35 MiB 3 min <1 m 18 x 7 x 2 Download
19_handhold_4_FDM(repaire d).stl
1.35 MiB 3 min <1 m 18 x 7 x 2 Download
20_valve_FDM(repaired).st l
8.56 MiB 56 min 1 m 27 x 28 x 18 Download
21_handhold_5_FDM(repaire d).stl
5.03 MiB 18 min <1 m 34 x 25 x 9 Download
22_handhold_6_FDM(repaire d).stl
4.12 MiB 19 min <1 m 34 x 25 x 9 Download
23_ge_lock_10H(x2)_FDM(re paired).stl
0.03 MiB 4 min <1 m 10 x 18 x 2 Download
24_beam_1_L_FDM (repaired ).stl
1.26 MiB 4 h 45 min 3 m 27 x 139 x 21 Download
25_beam_1_R_FDM (repaired ).stl
1.26 MiB 4 h 45 min 3 m 27 x 139 x 21 Download
26_beam_2_L_FDM (repaired ).stl
1.55 MiB 12 h 38 min 8 m 39 x 159 x 167 Download
27_beam_2_R_FDM (repaired ).stl
1.56 MiB 12 h 32 min 8 m 39 x 159 x 167 Download
28_beam_3_L_FDM (repaired ).stl
0.06 MiB 1 h 39 min 1 m 69 x 94 x 10 Download
29_beam_3_R_FDM (repaired ).stl
0.06 MiB 1 h 39 min 1 m 69 x 94 x 10 Download
30_beam_4_L_FDM (repaired ).stl
4.31 MiB 12 h 45 min 8 m 43 x 47 x 157 Download
31_beam_4_R_FDM (repaired ).stl
4.27 MiB 12 h 40 min 8 m 42 x 47 x 156 Download
32_beam_5_L_FDM (repaired ).stl
2.37 MiB 8 h 23 min 6 m 67 x 156 x 123 Download
33_beam_5_R_FDM (repaired ).stl
2.51 MiB 8 h 20 min 6 m 67 x 156 x 123 Download
34_beam_6_L_FDM (repaired ).stl
0.74 MiB 5 h 31 min 3 m 45 x 144 x 59 Download
35_beam_6_R_FDM (repaired ).stl
0.78 MiB 5 h 28 min 3 m 45 x 144 x 59 Download
36_beam_7_L_FDM (repaired ).stl
1.84 MiB 5 h 2 min 3 m 39 x 48 x 86 Download
37_beam_7_pipe_L_FDM (rep aired).stl
0.29 MiB 11 min <1 m 34 x 21 x 4 Download
38_beam_7_pipe_R_FDM (rep aired).stl
0.29 MiB 11 min <1 m 34 x 21 x 4 Download
39_beam_7_R_FDM (repaired ).stl
1.79 MiB 5 h 2 min 3 m 39 x 48 x 86 Download
40_beam_8_L_FDM (repaired ).stl
0.46 MiB 1 h 29 min 1 m 13 x 24 x 60 Download
41_beam_8_R_FDM (repaired ).stl
0.48 MiB 1 h 31 min 1 m 13 x 24 x 60 Download
42_beam_center_FDM (repai red).stl
0.47 MiB 7 h 3 min 4 m 182 x 102 x 13 Download
43_box_FDM (repaired).stl
4.59 MiB 2 h 8 min 1 m 33 x 45 x 29 Download
44_chain_x2_FDM (repaired ).stl
0.07 MiB 12 min <1 m 7 x 27 x 7 Download
45_hook_L_FDM (repaired). stl
0.48 MiB 19 min <1 m 16 x 44 x 8 Download
46_hook_R_FDM (repaired). stl
0.48 MiB 19 min <1 m 16 x 44 x 8 Download
Keychain (repaired).stl
0.35 MiB 23 min <1 m 30 x 30 x 2 Download
Tag (repaired).stl
1.70 MiB 1 h 16 min 1 m 150 x 18 x 5 Download
...

ABOUT THIS 3D MODEL

T-60 Power Armor is a wearable external armor, an exoskeleton that the Sole Survivor can either find or craft in the course of the Fallout 4 video game. Once completed, Power Armor guarantees radiation protection, increases strength, and retains the mobility of the playable character at the same time. Have you been looking for a location to find a complete T-60 Power Armor? We've got it on Gambody marketplace in the form of STL files that you can download and 3D print! 

The author of this Power Armor model must truly be a Fallout enthusiast since he went even further and prepared a Power Armor Station for you to display the model as if in the middle of a workshop of Brotherhood of Steel. Once printed and assembled the bulky T-60 can be attached to the hooks on the Station and hang there as if in expectation either of repair or of the Sole Survivor to step into. The 3D printing Power Armor is made taking into account all fine elements that distinguish the large T-60 from other Armor variations. It may not be the most agile option due to its imposing size but nevertheless, the T-60 is a highly desirable aim of any in-game adventurer. It's not a Fallout without Power Armor, so we are pretty sure this power suit for 3D printing is a model any fan of the renowned video game will want to add to the collection. Fortunately, the STL files to print the T-60 are just a click away!

ADAPTATION FOR 3D PRINTING

T-60 Power Armor for 3D printing is a static assembly model and its moderation and adaptation for different types of 3D printers took the Gambody team 76 hours in total. The figurines' anatomy and proportions were thoroughly reviewed during the moderation process for the suit to be depicted harmoniously in the intended pose.

The figurine’s cutting was chosen by our team to minimise the amount of generated support and some of the parts were hollowed out for you to save resin in the Eco version. In order to conceal the places where the assembly parts of the figurine are connected, T-60 Power Armor was divided into convenient assembly parts.

All assembly parts in the FFF/FDM 2.0 version are provided in STL files in recommended positions that were worked out in order to ensure the smoothness of the details’ surfaces after printing and that the 3D printing beginners won't face difficulties when placing the parts on a build plate. When downloading any model's file you will also receive "Assembly Manual" for FFF/FDM 2.0 and DLP/SLA 2.0 versions in PDF format. We highly recommend that you get acquainted with the “Assembly Video” and "Assembly Manual" before getting down to T-60 Power Armor.

The model is saved in STL files, a format supported by most 3D printers. All STL files for 3D printing have been checked in Netfabb and no errors were shown.

The figurine’s scale was calculated from the height of  T-60 Power Armor which is 2200 mm. The 3D printing figurine’s chosen scales are 1:8 for the FFF/FDM version and 1:16 for the DLP/SLA/SLS versions.

VERSIONS’ SPECIFICATIONS

FFF/FDM 2.0 version features:

  • Contains 46 parts;
  • A printed figurine is 341 mm tall, 226 mm wide, 302 mm deep;
  • Upgraded design - enhanced level of detail, reworked proportions.

DLP/SLA 2.0 version features:

  • Contains 15 parts;
  • A printed figurine is 171 mm tall, 113 mm wide, 151 mm deep;
  • Upgraded design - enhanced level of detail, reworked proportions.

DLP/SLA Eco 2.0 version features:

  • Contains 13 parts;
  • A printed figurine is 171 mm tall, 113 mm wide, 151 mm deep;
  • Upgraded design - enhanced level of detail, reworked proportions.

SLS 3.0 version features (Coming Soon):

  • Contains 2 parts - a solid Power Armor figurine and a platform
  • A printed figurine is 171 mm tall, 113 mm wide, 151 mm deep;
  • Upgraded design - enhanced level of detail, reworked proportions.

SLS 2.0 version features:

  • Made as a solid one-piece figurine;
  • A printed model is 168 mm tall, 111 mm wide, 148 mm deep;
  • Introduced new cutting and significantly enhanced level of detail;
  • Contains 2 parts - a one-piece model with the platform separated.

FFF/FDM 1.0 version features:

  • Contains 46 parts;
  • A printed model is 335 mm tall, 221 mm wide, 295 mm deep;
  • Assembly kit includes lock 23_ge_lock_10H(x2) to connect parts securely without glue that needs to be printed twice;
  • Made with a Power Armor Station platform where it can be displayed hung on a pair of hooks;
  • Wires that connect the hydraulic pistons of the Power Armor Station are not provided with STL files - we recommend that you use 2.85 mm flexible filament or simple 2.85/1.75mm PLA plastic;
  • All parts are divided in such a way that you will print them with the smallest number of support structures.

DLP/SLA 1.0 version features:

  • Contains 13 parts;
  • A printed model is 168 mm tall, 111 mm wide, 148 mm deep;
  • Made with a Power Armor Station platform where it can be displayed hung on a pair of hooks;
  • Wires that connect the hydraulic pistons of the Power Armor Station are not provided with STL files - we recommend that you use 2.85mm flexible filament or simple 2.85/1.75mm PLA plastic;
  • All parts are divided in such a way to fit the build plates and to ensure that support structures are generated where needed.

DLP/SLA Eco 1.0 version features:

  • Contains 13 parts;
  • A printed model is 168 mm tall, 111 mm wide, 148 mm deep;
  • Made with a Power Armor Station platform where it can be displayed hung on a pair of hooks;
  • Wires that connect the hydraulic pistons of the Power Armor Station are not provided with STL files - we recommend that you use 2.85mm flexible filament or simple 2.85/1.75mm PLA plastic;
  • Contains some hollowed out parts to save resin.

SLS 1.0 version features:

  • Contains 3 parts;
  • A printed model is 118 mm tall, 171 mm wide, 107 mm deep;
  • The scale of the model is indeterminate.

You can get the figurine of T-60 Power Armor Figurine for 3D Printing immediately after the purchase! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.

Watch the tutorial on how to assemble T-60 Power Armor 3D Printing Figurine on Gambody YouTube channel.

Also, you may like the Codsworth 3D Printing Model and other Video Game 3D Printing Models.

_______

FAQ: 

Generic

Below you can find printing recommendations for Cura, Bambu Lab, Simplify3D, Slic3r and PrusaSlicer software.

Disclaimer: The following printing settings are a recommendation, not an obligation. The parameters can vary depending on the peculiarities of your 3D printer, the material you use, and especially the particular assembly part you are working with. Each part that any model comprises often needs preliminary review, and you are free to tweak the settings the way you find suitable.

Note:

You can scale up the model (downscaling for FFF/FDM 3D printers is not recommended!);

All connectors should be printed at 100% Infill.

Bambu Lab printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in Bambu Studio 1.9.1. Test models were printed on the Bambu Lab A1, Bambu Lab A1 Mini, Creality Ender 3 S1, Anycubic Kobra 2, and Anycubic Vyper using PLA and PETG filaments.

To avoid printing problems, we recommend the following settings: download

Cura printing recommendations:

These are averaged settings which were tested in the Cura 5.2.1 slicer. Test models were printed on Anycubic Vyper, Creality Ender 3 Pro with PLA filament.

To avoid printing problems, we recommend the following settings: download

Simplify3D printing recommendations:

These are averaged settings which were tested in the Simplify3D 5.0.0 slicer. Test models were printed on Anycubic Vyper, FLSUN v400, Ender3 S1 with PLA filament.

To avoid printing problems, we recommend the following settings: download

Slic3r printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in Slic3r 1.3.0 software. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PetG filaments.

To avoid printing problems, we recommend the following settings: download

PrusaSlicer printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in PrusaSlicer 2.3.1. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PETG filaments.

To avoid printing problems, we recommend the following settings: download

Comments

comments powered by Disqus

Similar items

Browse more newly listed 3D printings