GePrinter Calibration Model for 3D Printer

(6)

cm: 4.6 w x 2.2 d x 5 h

in: 1.811 w x 0.866 d x 1.969 h

Assembly video 360° view

Source Files

Description

Printing Details

This test 3D Model of GePrinter consists of files in StereoLithography (.Stl) format that is optimized for 3D printing.

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

WHAT WILL YOU GET AFTER PURCHASE?

GePrinter STL files for FFF/FDM - files for all versions are available for download
Size:
Standard: 49 mm tall, 41 mm wide, 42 mm deep;
Keychain: 50 mm tall, 46 mm wide, 22 mm deep.

Detailed information about this 3D printing model is available in the DESCRIPTION section.


File Name	File Size	Time / Filament	Object Size (x/y/z mm)
Ge3dPrinter test model ke ychain.stl	0.85 MiB	3 h 30 min 2 m	45 x 50 x 22	Download
Ge3dPrinter test model.st l	0.94 MiB	5 h 45 min 3 m	41 x 47 x 42	Download

ABOUT THIS 3D MODEL

GePrinter is a free model that can be used for FDM 3D printer calibration. This test model must be printed without supports. Print the GePrinter free 3D print file to conduct:

bridging test;
acceleration test;
vertical surface test;
overhang test (45 degrees);
retraction test.

VERSIONS’ SPECIFICATIONS

FFF/FDM version's features:

Contains 2 parts;
A printed standard model is 49 mm tall, 41 mm wide, 42 mm deep;
A printed keychain model is 50 mm tall, 46 mm wide, 22 mm deep;
With the correct settings, the 3D printer's extruder moves in the X and Y axes;
With the correct settings, the build plate moves on the Z axis.

________

FAQ:

Generic

GePrinter calibration model must be printed without supports.

Below you can find printing recommendations for Cura, Bambu Lab, Simplify3D, Slic3r and PrusaSlicer software.

Disclaimer: The following printing settings are a recommendation, not an obligation. The parameters can vary depending on the peculiarities of your 3D printer, the material you use, and especially the particular assembly part you are working with. Each part that any model comprises often needs preliminary review, and you are free to tweak the settings the way you find suitable.

Note:

You can scale up the model (downscaling for FFF/FDM 3D printers is not recommended!);

All connectors should be printed at 100% Infill.

Bambu Lab printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in Bambu Studio 1.9.5. Test models were printed on the Bambu Lab A1, Bambu Lab A1 Mini, Creality Ender 3 S1, Anycubic Kobra 2, and Anycubic Vyper using PLA and PETG filaments.