Godzilla Extreme 3D Printing Figurine | Assembly

HISTORY OF GODZILLA EXTREME

The extreme concept of Godzilla, made by Dope Pope from the artwork of Bracey 100. Formed from several reptile types, it is a new redesigned kaiju in the Godzilla Neo vein. This monster is called Kiryu. In 2003, Kiryu had its massive final battle with Godzilla 3 in the streets of Tokyo. When the battle came to its end, Kiryu’s DNA computer reawoke its instincts as the former King of the Monsters, GODZILLA 1. The giant cyborg carried Godzilla out into the ocean, and the two plummeted into the Japan Trench, where the younger monster stayed at the bottom of the sea, allowed to heal from the battle. Kiryu, having absorbed much of Godzilla’s atomic heat ray, shut down its circuitry, and began to change. The techno-organic heart in its chassis was beginning to mutate and fuse with the skeleton in its frame expelling inorganic material, growing new nervous systems, new muscles, new organs and a new brain.

ABOUT THIS 3D FIGURINE

The model is saved in STL files, a format supported by most 3D printers. 

FFF/FDM 1.0 version features:
- Contain 36 parts;
- Made with Locks for better fixing. One part of Lock (6_Ge_lock_10H_(X71)) you need to print 71 times.
- Made with 2 variants of the platform. Divided and Solid for different sizes of buildplates;
- All parts are divided in such way that you will print them with the smallest amount of supports.

DLP/SLA 1.0 version features:
- Same as FDM but smaller, also made as 19 parts;

SLS 1.0 version features:
- Same as SLA but made as 2 parts for economy your material;

All STL files for 3D printing have been checked in Netfabb and no errors were shown.

Note: Before starting 3D printing the model, read the Printing Details for CURA 3.4.1. or Simplify3D Software.

There are 36 parts for FFF/FDM 1.0 version, 19 parts for DLP/SLA 1.0 version and 2 parts for SLS 1.0.

Scale: Godzille Extreme height is 91000 mm. The scale of this model made in proportion to it. 1/250 for FDM version and 1/500 for SLA/SLS version.

FFF/FDM version dimensions:
After being printed will stand - 394 mm tall, 442 mm wide, 394 mm deep;

DLP/SLA/​SLS version dimensions:
After being printed will stand - 197 mm tall, 221 mm wide, 197 mm deep;
- Has a few details, to keep printing costs down.

WHAT WILL YOU GET AFTER PURCHASE?

- STL files of Godzilla Extreme​ 3D Figurine for 3D printing which consist of 57 parts;
- 3 versions of files for this model for FFF/FDM, DLP/SLA, and SLS;
- High-poly detailed figurine of Godzilla Extreme​;
- Detailed settings that we provide for Cura 3.4.1. and Simplify3D for the best print;
- Full technical support from the Gambody Support Team.

You can get Model of Godzilla Extreme​ for 3D Printing right now! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.

Watch the tutorial video on how to assemble Godzilla Extreme​ 3D Printing Figurine at Gambody YouTube channel.

Also, you may like other Kaiju 3D Printing Figurines.

_______
FAQ: 
Where can I print a model if I have no printer?
How to get started with 3D printing?
How to set up my 3D printer?
How to choose right 3D model print bed positioning? 
How to paint printed figurine?

Generic

Below you can find printing recommendations for Cura, Simplify3D, Slic3r and PrusaSlicer software.

Disclaimer: The following printing settings are a recommendation, not an obligation. The parameters can vary depending on the peculiarities of your 3D printer, the material you use, and especially the particular assembly part you are working with. Each part that any model comprises often needs preliminary review, and you are free to tweak the settings the way you find suitable.

Note:

• You can scale up the model (downscaling for FFF/FDM 3D printers is not recommended!);
• All connectors should be printed at 100% Infill.

Cura printing recommendations:

These are averaged settings which were tested in the Cura 5.2.1 slicer. Test models were printed on Anycubic Vyper, Creality Ender 3 Pro with PLA filament.

To avoid printing problems, we recommend the following settings: download

Simplify3D printing recommendations:

These are averaged settings which were tested in the Simplify3D 5.0.0 slicer. Test models were printed on Anycubic Vyper, FLSUN v400, Ender3 S1 with PLA filament.

To avoid printing problems, we recommend the following settings: download

Slic3r printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in Slic3r 1.3.0 software. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PetG filaments.

To avoid printing problems, we recommend the following settings: download

PrusaSlicer printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in PrusaSlicer 2.3.1. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PETG filaments.

To avoid printing problems, we recommend the following settings: download