Lara Croft in Action 3D Printing Figurine | Static

Lara Croft 3D model is inspired by and stylized according to the video game and movie character of the same name. 

Known for her brave nature and courage, Lara Croft has become one of the most appreciated female video game characters of all time. She has had many appearances both on and off screen. Her athletic body and beautiful physique have made her a sex symbol, with a large base of followers. 

The new 3D model of Lara Croft shows her in action position, holding two guns, ready to fire them when she sees a threat approaching.

Lara Croft in action 3D model is sculpted in Autodesk Maya and ZBrush. It is converted into a single STL file. The file is optimized to be easily handled in any slicing program and to be 3D printed on any type of 3D printer. 

The outer shell of the model showcases intricate and smooth details. 

After being 3D printed, the video game character for 3D printing will stand 8 cm wide, 15 cm tall and 10 cm deep.

Printing recommendation: print better in PLA with 0.1 layer height. Use raft and support.

Buy Lara Croft in Action 3D model STL files by clicking the green Buy button. Add the STL file to your shopping cart. Proceed to checkout. Provide your credit card or PayPal details. Download the STL file in a .zip folder.

Use 3DHubs or Treatstock 3D printing services to 3D print the model directly from our website.

Download also this Lara Croft 3D Model. 
 

Generic

This model was tested in Cura 15.06. To avoid printing problems, we recommend the following settings:

Quality

• Layer height: 0.1mm*
• Initial layer thickness: 0.3mm
• Bottom/top pattern: lines
• Skin perimeter line count: 0
• Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers).

*Layer Height 0.1mm is recommended for a better quality for the printed model. However, the printing time will double.

As a STL file provider, our goal is to ensure that the files are error-free and printable in the most accurate way. This is why we only test print the most difficult segments of the model’s parts.

The model's parts have been tested and printed in PLA. In case you need advice where to get your filaments from, check our partner's website.

Speed setups:

• Infill speed: 30mm/s
• Outer shell speed : 30mm/s
• Inner shell speed: 20mm/s
• Top/bottom speed: 20mm/s
• Support speed: 50mm/s
• Travel speed: 150mm/s
• Skirt speed: 30mm/s
• Amount of slower layers: 4

Infill:

• Infill pattern: Grid
• Line distance: 1.5mm
• Infill overlap: 20%
• Infill layers: 0

Support:

• Enable support: Check
• Placement: Everywhere
• Overhang angle: 30°
• X/Y distance: 0.7mm
• Top distance: 0.2mm
• Bottom distance: 0.2mm
• Stair step height: 0.5mm
• Join distance: 0.7mm
• Area smoothing: 0.6mm
• Use towers: check
• Pattern: Grid
• Line distance: 1.5mm

Platform adhesion:

• Type: Brim
• Brim line count: 10 (up to 20, depending on the model’s height)

Other 3D printing recommendations:

Outer Shell Speed - 20mm/s and Support Speed - 40mm/s settings apply to avoid model deformation.  Apply other settings by default.

Disclaimer: This model will look outstanding if printed on SLA/SLS 3D printer. The accuracy of the model printed on FFF printer can vary from the result shown in the pictures.