This 3d model consists of files in StereoLithography (.Stl) format that have been optimized for 3d printing.
Download parts set1_T1 and set1_T2 for free to check the printability and test the quality before buying all STL files of the 3D model.
Download Free Samples
Before printing the files, we strongly recommend reading the PRINTING DETAILS section.
This set of dangerously looking fixtures has been crafted to be added to your Mammoth Tank 3D printing design. It is a bonus set of awesome elements that have been designed with one purpose only – to add more ferocious accessories to the war vehicle.
Consisting of three additional enhancements, such as a tower, splashboards and a battering ram, these additional elements provide extra defense and attack options for your already dangerously equipped tank. With these supplementary fittings, your tank will look invincible, leaving the enemy no chance for survival.
The entire set consists of 13 parts adapted for SLS/SLA and FFF printers. The files have been tested by the designers to ensure smooth and error-free printing.
Order Mammoth tank accessories 3D print files by clicking on the green “Buy” button. Add your PayPal account or credit card details and download the files to your computer.
Note: To be able to see all the massiveness this set has to offer, you need to firstly download and print Mammoth tank printings and later join them together to enjoy an outstanding result of a real war tank.
Generic
This model was tested in Cura 15.06. To avoid printing problems, we recommend:
Quality:
- Layer height 0.1mm
- Initial layer thickness 0.3mm
- Bottom/top pattern: lines
- Horizontal expansion: 0.04mm (when entering 0.04 index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers).
Check this Simplify3D User Guidelines to avoid any 3D printing problems with this software.
Speed setups:
- Infill speed: 50mm/s
- Outer shell speed: 30mm/s
- Inner shell speed: 20mm/s
- Top/Bottom speed: 20mm/s
- Support speed: 50mm/s
- Travel speed: 150mm/s
- Skirt speed: 30mm/s
- Amount of slower layers: 4
Infill:
- Infill Pattern: Grid
- Line distance: 3mm
- Infill Overlap: 20%
- Infill Layers: 0
Support:
- Enable support: Check
- Placement: Everywhere
- Overhang angle - 30°
- X/Y distance: 0.7mm
- Top distance: 0.2mm
- Bottom distance: 0.2mm
- Stair step height: 0.5mm
- Join distance: 0.7mm
- Area smoothing: 0.6mm
- Use towers: Check
- Pattern: lines
- Line distance: 1.5mm
Platform Adhesion:
- Type: Brim
- Brim Line Count: 7 (up to 20, depending on the model’s height)
Model has been tested in PLA.
Recommendations:
All parts will be printed on the built plate in such a way as to save PLA material, to keep to print pattern and to cut printing time, while avoiding quality loss.
All basic settings by default.
Comments