MWO War Hammer 3D Printing Model | Assembly + Action

ABOUT THIS 3D MODEL

MWO War Hammer 3D model is inspired by the MWO video game, so popular among players all over the world. This mech is bulkier than its brethren, with heavy armour and firepower, capable of destroying or producing severe damage to other mechs from the same class or inferior.

Whm 6D Battlemech 3D model features its heavy armor and weaponry reproduced for 3D printing. It is a high-poly, articulated model. 

ADAPTATION FOR 3D PRINTING

MWO War Hammer for 3D printing is an active assembly model and its moderation and adaptation for different types of 3D printers took the Gambody team 30 hours in total. 

For you to receive the cleanest 3D printing result possible and to minimize the amount of filament needed for generated support, the MWO War Hammer model was divided into many assembly parts.

All assembly parts in the FFF/FDM versions are provided in STL files in recommended positions that were worked out in order to ensure the smoothness of the details’ surfaces after printing and that the 3D printing beginners won't face difficulties when placing the parts on a build plate. We highly recommend that you get acquainted with the “Assembly video” before getting down to the MWO War Hammer model.

The model is saved in STL files, a format supported by most 3D printers. All STL files for 3D printing have been checked in Netfabb and no errors were shown.

The 3D printing model’s chosen scales are 1:60 for the FFF/FDM version and 1:100 for the DLP/SLA version.

VERSIONS' SPECIFICATIONS

FFF/FDM 2.1 version features:
- Contains 30 parts;
- A printed model stands 290 mm tall, 183 mm wide, 164 mm deep;
- Fully articulated model;
- Completely reworked joints;
- The number of required printed copies of a part is indicated in the file's name - e.g. "27_handPin_x4.stl" needs to be printed 4 times;
- All parts are divided in such a way that you will print them with the smallest number of support structures.

DLP/SLA/SLS 1.0 version features:
- Contains 12 parts;
- A printed model stands 174 mm tall, 110 mm wide, 99 mm deep;
- Fully articulated model;
- All parts are divided in such a way to fit the build plates and to ensure that support structures are generated where needed.

FFF/FDM 2.0 version features:
- Contains 33 parts and comes in 1/60 scale;
- Features outdated joints;
- A printed model stands 290 mm tall, 183 mm wide, 164 mm deep;
- Fully articulated model.

FFF/FDM 1.0 version features:
- The original version of MWO War Hammer released in 2016;
- The scale of the model is indeterminate;
- Features outdated joints.

You can get the model of MWO War Hammer for 3D Printing immediately after the purchase! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.

Watch the tutorial video on how to assemble the FFF/FDM 2.0 version of MWO War Hammer 3D Printing Model on Gambody YouTube channel. 

_______
FAQ: 
Where can I print a model if I have no printer?
How to get started with 3D printing?
How to set up my 3D printer?
How to choose right 3D model print bed positioning? 
How to paint printed figurine?

Generic

Below you can find printing recommendations for Cura, Bambu Lab, Simplify3D, Slic3r and PrusaSlicer software.

Disclaimer: The following printing settings are a recommendation, not an obligation. The parameters can vary depending on the peculiarities of your 3D printer, the material you use, and especially the particular assembly part you are working with. Each part that any model comprises often needs preliminary review, and you are free to tweak the settings the way you find suitable.

Note:

You can scale up the model (downscaling for FFF/FDM 3D printers is not recommended!);

All connectors should be printed at 100% Infill.

Bambu Lab printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in Bambu Studio 1.9.5. Test models were printed on the Bambu Lab A1, Bambu Lab A1 Mini, Creality Ender 3 S1, Anycubic Kobra 2, and Anycubic Vyper using PLA and PETG filaments.

To avoid printing problems, we recommend the following settings: download

Cura printing recommendations:

These are averaged settings which were tested in the Cura 5.8.1 slicer. Test models were printed on Anycubic Vyper, Creality Ender 3 Pro with PLA filament.

To avoid printing problems, we recommend the following settings: download

Simplify3D printing recommendations:

These are averaged settings which were tested in the Simplify3D 5.0.0 slicer. Test models were printed on Anycubic Vyper, FLSUN v400, Ender3 S1 with PLA filament.

To avoid printing problems, we recommend the following settings: download

Slic3r printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in Slic3r 1.3.0 software. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PetG filaments.

To avoid printing problems, we recommend the following settings: download

PrusaSlicer printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in PrusaSlicer 2.3.1. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PETG filaments.

To avoid printing problems, we recommend the following settings: download