Pippin Took STL files for 3D Printing | Assembly Model

3D MODEL HISTORY

Peregrin “Pippin” Took is one of Frodo Baggins' youngest friends and a mischievous member of the Fellowship of the Ring. Despite being cheerful and sometimes thoughtless, Pippin bravely took on the Quest of Mordor and fought to protect Middle-earth against the heinous Sauron and his swarm of Orcs. The hobbit proved himself to be not only courageous but also quick on his feet when he came up with the idea that made Treebeard carry him and his close cousin Merry to Isengard. His youthful charm and resourcefulness can't help but enamour LotR fans and, of course, our contributing 3D artist. Following his wonderful Treebeard and Merry Brandybuck 3D printing designs, the author of the model decided to sculpt Peregrin Took as the finishing touch to the beautiful diorama. It took the 3D artist around 141 hours to fully capture one of the most handsome hobbits in the Shire in the form of a 3D printable files. The two 3D model recreations of Pippin can make him stand upright on a small decorative platform or sit on top of Treebeard’s branches. Pippin’s face framed with natural locks is scarred with worry and shock as the devastation wrought by Saruman's Orcs lays bare before their eyes. Peregrin Took 3D printer model is wearing the attire common among the Hobbits. Under the cloak held by a Lorien leaf pendant clasp, Pippin is wearing a jacket, a fringed scarf, and an embroidered shirt made of fabrics from their beloved homeland. His breeches reach a little below the knee, exceptionally hairy large feet are as always bare. Peregrin Took 3D printing design brims with wonderful details and can become another treasure in your Lord of the Rings installation. Pippin is ready to join his friends in battle!

3D PRINTING MODEL FEATURES

Model-specific features:

• Two poses available: Standing and Sitting;
• Standing version includes a display stand resembling the grounds of Fangorn forest;
• Sitting version is specifically designed to combine with the Treebeard and Merry Brandybuck models into diorama.

Printing & assembly details:

• Provided as error-free STL files compatible with most 3D printers;
• Optimized part division minimizes support material and ensures smooth surface detail;
• The assembly parts in the FFF/FDM version come in the recommended print orientations for easy bed placement;
• Hollowed-out parts in DLP/SLA Eco versions of the model to save resin;
• Assembly manual in video format is included for both FFF/FDM and DLP/SLA versions;
• The model is available in recommended scales of 1:8 for the FFF/FDM version and 1:16 for the DLP/SLA version, based on the actual height of Pippin Took which is 1040 mm.

VERSIONS' SPECIFICATIONS

1.0 FFF/FDM Stand

• Parts: 11
• Eco parts: 0
• Scale: 1:8
• Printed model size (w/h/d, mm): 136 x 68 x 64;
• Assembly: Connectors
• Features: Standing pose of the Pippin model; Comes with a stand to resemble the grounds of Fangorn Forest; The assembly parts are connected using specially designed integrated connectors that fit securely into the corresponding slots.

1.0 FFF/FDM Sit

• Parts: 11
• Eco parts: 0
• Scale: 1:8
• Printed model size (w/h/d, mm): 104 x 75 x 61;
• Assembly: Connectors
• Features: Sitting pose of the Pippin model; This version is designed to complete a diorama with Treebeard and Merry Brandybuck to depict the Ent carrying the Hobbits (Treebeard and Merry 3D STLs are sold separately); The assembly parts are connected using specially designed integrated connectors that fit securely into the corresponding slots.

1.0 DLP/SLA Stand

• Parts: 7
• Eco parts: 0
• Scale: 1:16
• Printed model size (w/h/d, mm): 68 x 34 x 32;
• Assembly: Connectors
• Features: Standing pose of the Pippin model; Comes with a stand to resemble the grounds of Fangorn Forest; The assembly parts are connected using specially designed integrated connectors that fit securely into the corresponding slots.

1.0 DLP/SLA Sit

• Parts: 6
• Eco parts: 0
• Scale: 1:16
• Printed model size (w/h/d, mm): 52 x 38 x 31;
• Assembly: Connectors
• Features: Sitting pose of the Pippin model; This version is designed to complete a diorama with Treebeard and Merry Brandybuck to depict the Ent carrying the Hobbits (Treebeard and Merry 3D STLs are sold separately); The assembly parts are connected using specially designed integrated connectors that fit securely into the corresponding slots.

1.0 DLP/SLA Eco Stand

• Parts: 7
• Eco parts: 7
• Scale: 1:16
• Printed model size (w/h/d, mm): 68 x 34 x 32;
• Assembly: Connectors
• Features: Contains some hollowed our parts to save resin; Standing pose of the Pippin model; Comes with a stand to resemble the grounds of Fangorn Forest; The assembly parts are connected using specially designed integrated connectors that fit securely into the corresponding slots.

1.0 DLP/SLA Eco Sit

• Parts: 6
• Eco parts: 6
• Scale: 1:16
• Printed model size (w/h/d, mm): 52 x 38 x 31;
• Assembly: Connectors
• Features: Contains some hollowed our parts to save resin; Sitting pose of the Pippin model; This version is designed to complete a diorama with Treebeard and Merry Brandybuck to depict the Ent carrying the Hobbits (Treebeard and Merry 3D STLs are sold separately); The assembly parts are connected using specially designed integrated connectors that fit securely into the corresponding slots.

1.0 SLS Stand

• Parts: 3
• Eco parts: 0
• Scale: 1:16
• Printed model size (w/h/d, mm): 68 x 34 x 32;
• Assembly: Connectors
• Features: Made as a solid one-piece 3D model; Standing pose of the Pippin model; Comes with a stand to resemble the grounds of Fangorn Forest; The assembly parts are connected using specially designed integrated connectors that fit securely into the corresponding slots.

1.0 SLS Sit

• Parts: 1
• Eco parts: 0
• Scale: 1:16
• Printed model size (w/h/d, mm): 52 x 38 x 31;
• Assembly: Solid
• Features: Sitting pose of the Pippin model; This version is designed to complete a diorama with Treebeard and Merry Brandybuck to depict the Ent carrying the Hobbits (Treebeard and Merry 3D STLs are sold separately).

HELPFUL EXTRAS

You can get the STL files of Pippin Took for 3D printing immediately after the purchase! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.

Watch the tutorial on how to assemble the 3D Printed Pippin Took Model from the provided 3D print files on Gambody YouTube channel.

Also, you may like other Movie 3D Print Models.

_______

FAQ:

• Where can I print a model if I have no printer?
• How to get started with 3D printing?
• How to set up my 3D printer?
• How to choose right 3D model print bed positioning?
• How to paint printed model?

Generic

Below you can find printing recommendations for Cura, Bambu Studio, Simplify3D, Slic3r and PrusaSlicer software.

Disclaimer: The following printing settings are a recommendation, not an obligation. The parameters can vary depending on the peculiarities of your 3D printer, the material you use, and especially the particular assembly part you are working with. Each part that any model comprises often needs preliminary review, and you are free to tweak the settings the way you find suitable.

Note:

You can scale up the model (downscaling for FFF/FDM 3D printers is not recommended!);

All connectors should be printed at 100% Infill.

Bambu Lab printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in Bambu Studio 1.9.5. Test models were printed on the Bambu Lab A1, Bambu Lab A1 Mini, Creality Ender 3 S1, Anycubic Kobra 2, and Anycubic Vyper using PLA and PETG filaments.

To avoid printing problems, we recommend the following settings: download

Cura printing recommendations:

These are averaged settings which were tested in the Cura 5.8.1 slicer. Test models were printed on Anycubic Vyper, Creality Ender 3 Pro with PLA filament.

To avoid printing problems, we recommend the following settings: download

Simplify3D printing recommendations:

These are averaged settings which were tested in the Simplify3D 5.0.0 slicer. Test models were printed on Anycubic Vyper, FLSUN v400, Ender3 S1 with PLA filament.

To avoid printing problems, we recommend the following settings: download

Slic3r printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in Slic3r 1.3.0 software. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PetG filaments.

To avoid printing problems, we recommend the following settings: download

PrusaSlicer printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in PrusaSlicer 2.3.1. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PETG filaments.

To avoid printing problems, we recommend the following settings: download