Source Files

Description

Printing Details

This 3D model of The Space Cruiser consists of files in StereoLithography (.Stl) format that is optimized for 3D printing.

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

WHAT WILL YOU GET AFTER PURCHASE?

2 versions of The Space Cruiser STL files for FFF/FDM and DLP/SLA - files for all versions are available for download after the purchase;
STL files of high-poly The Space Cruiser Model for 3D printing consist of 21 files;
Sizes for:
FFF/FDM: 105 mm tall, 122 mm wide, 171 mm deep;
DLP/SLA: 52 mm tall, 61 mm wide, 86 mm deep;
Assembly Manual for FFF/FDM 1.0 and DLP/SLA 1.0 versions in PDF and video formats;
Detailed settings that we provide as a recommendation for Cura, Simplify3D, Slic3r and PrusaSlicer for the best print;
Full technical support from the Gambody Support Team.

Detailed information about this 3D printing model is available in the DESCRIPTION section.


	File Name	File Size	Time / Filament	Object Size (x/y/z mm)
	_01_bodyPart_a_FDM (repai red).stl	17.57 MiB	15 h 35 min 9 m	128 x 128 x 26	Download
	_02_bodyPart_b_FDM (repai red).stl	25.34 MiB	12 h 53 min 8 m	138 x 137 x 23	Download
	_03_bodyPart_c_FDM (repai red).stl	2.30 MiB	1 h 10 min 1 m	79 x 78 x 7	Download
	_04_cockpit_FDM (repaired ).stl	72.72 MiB	7 h 7 min 4 m	75 x 75 x 46	Download
	_05_cockpitGlass_FDM (rep aired).stl	1.70 MiB	4 h 50 min 4 m	73 x 74 x 32	Download
	_06_cockpitGlassArc_FDM ( repaired).stl	0.10 MiB	11 min <1 m	77 x 36 x 4	Download
	_07_cockpitPart_FDM (repa ired).stl	1.76 MiB	46 min <1 m	53 x 16 x 13	Download
	_10_steeringWheelPart_a_F DM (repaired).stl	0.44 MiB	6 min <1 m	6 x 26 x 9	Download
	_11_steeringWheelPart_b_F DM (repaired).stl	1.56 MiB	3 min <1 m	15 x 14 x 2	Download
	_12_smokeStand_FDM (repai red).stl	17.63 MiB	43 h 1 min 24 m	152 x 148 x 108	Download
	Keychain (repaired).stl	0.35 MiB	23 min <1 m	30 x 30 x 2	Download
	Tag (repaired).stl	1.70 MiB	1 h 18 min 1 m	150 x 18 x 5	Download
	_08_engine_a_L_FDM (repai red).stl	6.94 MiB	1 h 11 min 1 m	28 x 24 x 26	Download
	_09_engine_b_R_FDM (repai red).stl	6.91 MiB	1 h 10 min 1 m	28 x 23 x 26	Download
...

ABOUT THIS 3D MODEL

The Space Cruiser is an integral part of the Rick and Morty animated sitcom. Built and designed by engineer-scientist Rick Sanchez from the stuff in his garage, the vehicle could be used for space traveling and overcoming interstellar distances. The cruiser has a flying saucer shape, it is equipped with numerous weaponry, such as guns, miniguns, rockets, and lasers among others. The vehicle is commonly used by Rick and Morty for their travels to other planets and dimensions.

A big fan of one of the most popular animated sitcoms of all time, our creative 3D artist created this impressive model for 3D printing. The Space Cruiser is depicted in a flying position with the smoke coming from the exhaust pipe. The shape of the vehicle reminds us of a flying saucer, but the wheels and headlights impart similarity to the land transport. Just imagine how great this model will complete our Rick and Morty collection of 3D-printables!

ADAPTATION FOR 3D PRINTING

The Space Cruiser model for 3D printing is a static assembly model and its moderation and adaptation for different types of 3D printers took the Gambody team 63 hours in total.

For you to receive the cleanest 3D printing result possible, minimize the amount of filament needed for generated support, and make use of the active elements designed by Gambody Engineers, the vehicle was divided into convenient assembly parts.

All assembly parts in the FFF/FDM 1.0 version are provided in STL files in recommended positions that were worked out in order to ensure the smoothness of the details’ surfaces after printing and that the 3D printing beginners won’t face difficulties when placing the parts on a build plate. When downloading any model’s file you will also receive “Assembly Manual” for FFF/FDM 1.0 and DLP/SLA 1.0 versions in PDF and video formats. We highly recommend that you get acquainted with the “Assembly Video” and “Assembly Manual” before getting down to the Space Cruiser 3D printing model.

The model is saved in STL files, a format supported by most 3D printers. All STL files for 3D printing have been checked in Netfabb and no errors were shown.

The model’s scale was calculated from the length of the Space Cruiser. The 3D printing model’s chosen scales are 1:32 for the FFF/FDM version and 1:64 for the DLP/SLA version.

VERSIONS’ SPECIFICATIONS

FFF/FDM 1.0 version features:

Contains 12 parts;
A printed model is 105 mm tall, 122 mm wide, 171 mm deep;
Two variants of cockpit window: as a frame and for printing with transparent filament;
All parts are divided in such a way that you will print them with the smallest number of support structures.

DLP/SLA 1.0 version features:

Contains 9 parts;
A printed model is 52 mm tall, 61 mm wide, 86 mm deep;
All parts are divided in such a way to fit the build plates and to ensure that support structures are generated where needed.

You can get the The Space Cruiser model for 3D printing immediately after the purchase! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.

Watch the tutorial on how to assemble The Space Cruiser 3D Printing Model on Gambody YouTube channel.

Also, you may like Rick 3D Printing Figurine and other Rick and Morty 3D Printing Figurines.

________

FAQ:

Generic

Below you can find printing recommendations for Cura, Simplify3D, Slic3r and PrusaSlicer software.

Disclaimer: The following printing settings are a recommendation, not an obligation. The parameters can vary depending on the peculiarities of your 3D printer, the material you use, and especially the particular assembly part you are working with. Each part that any model comprises often needs preliminary review, and you are free to tweak the settings the way you find suitable.

Note:

You can scale up the model (downscaling for FFF/FDM 3D printers is not recommended!);

All connectors should be printed at 100% Infill.

Cura printing recommendations:

These are averaged settings which were tested in the Cura 5.2.1 slicer. Test models were printed on Anycubic Vyper, Creality Ender 3 Pro with PLA filament.

To avoid printing problems, we recommend the following settings: download

Simplify3D printing recommendations:

These are averaged settings which were tested in the Simplify3D 5.0.0 slicer. Test models were printed on Anycubic Vyper, FLSUN v400, Ender3 S1 with PLA filament.

To avoid printing problems, we recommend the following settings: download

Slic3r printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in Slic3r 1.3.0 software. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PetG filaments.

To avoid printing problems, we recommend the following settings: download

PrusaSlicer printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in PrusaSlicer 2.3.1. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PETG filaments.

To avoid printing problems, we recommend the following settings: download