Vault Boy: Adrenaline Rush + Gangster 3D Print Models | Scale Figures

The Vault Boy is the hugely recognizable perk from the post-apocalyptic role-playing video game. Popping up whenever you achieve a new skill in the video game, this adorable character makes your day when displaying his huge grin and talking as if coming from another age. The Vault Boy Perk has cartoon-like appearance and has been around for about 20 years now. 
Easily recognizable due to his blue jumpsuit and golden locks, this funny guy’s artwork is influenced by the culture of 1950’s America.

The 3D print designs that are available for download in .STL file format showcase a Gangster and a six-pack athlete Vault Boy. This set will definitely make an impression on your fellow friends. The figures are 5.085cm wide, 6.203cm deep and 9.5cm tall. They both are mounted on watermarked support.

You can buy the Vault Boy 3D printing files by clicking on the “Buy” button. Add your PayPal account or your credit card details and you’re good to go.

Generic

These models were tested in Cura 15.06. To avoid printing problems, we recommend the following settings:

Quality:

• Layer height: 0.1mm*
• Initial layer thickness: 0.3mm
• Bottom/top pattern: lines
• Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer 
• *Layer Height 0.1mm is recommended for a better quality for the printed model. However, the printing time will double.

Check this Simplify3D User Guidelines to avoid any 3D printing problems with this software.

The models have been tested and printed out in PLA.

Speed setups:

• Infill speed: 50mm/s
• Outer shell speed: 30mm/s
• Inner shell speed: 20mm/s
• Top/Bottom Speed: 20mm/s
• Support speed: 50mm/s
• Travel speed: 150mm/s
• Skirt speed: 30mm/s
• Amount of slower layers: 4

Infill:

• Infill pattern: Grid
• Line distance: 3mm
• Infill overlap: 20%
• Infill layers: 0

Support:

• Enable support: check
• Placement: Everywhere
• Overhang angle: 30°
• X/Y distance: 0.7mm
• Top distance: 0.2mm
• Bottom distance: 0.2mm
• Stair step height: 0.5mm
• Join distance: 0.7mm
• Area smoothing: 0.6mm
• Use towers: check
• Pattern: Grid 
• Line distance: 1.5mm

Platform Adhesion:

• Type: Brim
• Brim line count: 10 (up to 20, depending on the model’s height)

Other 3D printing recommendations 

Outer Shell Speed - 20mm/s and Support Speed - 40mm/s settings apply to avoid model deformation. Use other settings by default.

Disclaimer: This model will look outstanding if printed on SLA/SLS 3D printer. The accuracy of the model printed on FFF printer can vary from the result shown in the pictures.