STL files and the cutting of this model are preserved as created by the Author. This model was not moderated by Gambody, it is not subject to technical support by Gambody, and we do not offer any guarantees on the 3D printing results.
Stock models can only be purchased in an order separate from the Premium STL files by Gambody. If a Premium model is added to the Cart, the Stock models are deleted automatically, and vice versa.
You can read more about Stock models on Gambody's Blog.
The Author of the Stock model can provide technical support if they wish. All your questions, requests, wishes and remarks can be left in the comment section below.
Gambody Team can consider providing a Premium version of the model if highly requested.
|
|||||
|---|---|---|---|---|---|
| File Name | File Size | Time / Filament | Object Size (x/y/z mm) |
||
|
Top Section Inner Window. stl |
0.02 MiB | 26 min <1 m | 41 x 6 x 17 | Download | |
|
Figure 3.stl |
0.07 MiB | 3 min <1 m | 4 x 3 x 13 | Download | |
|
Leg Shield Pin Female.stl |
0.07 MiB | 3 min <1 m | 6 x 7 x 5 | Download | |
|
Cockpit Ceiling.stl |
0.19 MiB | 34 min <1 m | 50 x 23 x 7 | Download | |
|
Figure 5.stl |
0.15 MiB | 5 min <1 m | 4 x 7 x 13 | Download | |
|
Figure 4.stl |
0.15 MiB | 1 min <1 m | 3 x 2 x 12 | Download | |
|
Figure 6.stl |
0.15 MiB | 3 min <1 m | 3 x 4 x 12 | Download | |
|
Leg Shield Pin Male.stl |
0.22 MiB | 4 min <1 m | 12 x 7 x 5 | Download | |
|
Peg Cap.stl |
0.28 MiB | 1 min <1 m | 4 x 4 x 2 | Download | |
|
Peg.stl |
0.39 MiB | 2 min <1 m | 4 x 4 x 12 | Download | |
|
Passenger Section Floor.s tl |
0.51 MiB | 5 h 4 min 2 m | 96 x 15 x 96 | Download | |
|
Leg Support Upper.stl |
0.72 MiB | 10 min <1 m | 7 x 19 x 9 | Download | |
|
Engine Plate.stl |
0.74 MiB | 32 min <1 m | 17 x 16 x 20 | Download | |
|
Leg Footpad Angle Arm.stl |
1.40 MiB | 1 min <1 m | 4 x 11 x 2 | Download | |
|
Passenger Section Ceiling .stl |
1.40 MiB | 5 h 37 min 2 m | 95 x 10 x 95 | Download | |
|
Cockpit Seat.stl |
1.62 MiB | 4 min <1 m | 8 x 4 x 7 | Download | |
|
Leg Shield.stl |
2.47 MiB | 29 min <1 m | 26 x 32 x 15 | Download | |
|
Leg Footpad Female.stl |
2.98 MiB | 6 min <1 m | 12 x 7 x 6 | Download | |
|
Leg Footpad Male.stl |
3.54 MiB | 13 min <1 m | 12 x 7 x 13 | Download | |
|
Cockpit Structure.stl |
3.58 MiB | 1 h 41 min 1 m | 50 x 26 x 24 | Download | |
|
Leg Connector Arm Upper.s tl |
3.90 MiB | 15 min <1 m | 23 x 5 x 11 | Download | |
|
Figure 2.stl |
3.97 MiB | 9 min <1 m | 8 x 7 x 13 | Download | |
|
Figure 1.stl |
4.01 MiB | 10 min <1 m | 8 x 7 x 12 | Download | |
|
Leg Connector Arm Lower.s tl |
4.98 MiB | 20 min <1 m | 37 x 15 x 10 | Download | |
|
ZGT Holding Tank.stl |
5.06 MiB | 48 min <1 m | 16 x 23 x 16 | Download | |
|
Passenger Seat.stl |
5.16 MiB | 8 min <1 m | 15 x 10 x 7 | Download | |
|
ZGT Holding Tank - Mount. stl |
5.29 MiB | 1 h 9 min 1 m | 16 x 32 x 16 | Download | |
|
RCS Pod.stl |
9.25 MiB | 22 min <1 m | 14 x 17 x 14 | Download | |
|
Leg Main Structure.stl |
10.17 MiB | 21 min <1 m | 8 x 38 x 9 | Download | |
|
Top Section.stl |
12.07 MiB | 14 h 58 min 9 m | 106 x 37 x 106 | Download | |
|
Lower Section.stl |
16.81 MiB | 43 h 8 min 30 m | 114 x 51 x 114 | Download | |
|
Engine Body.stl |
26.36 MiB | 3 h 55 min 2 m | 35 x 32 x 35 | Download | |
|
Passenger Section.stl |
31.24 MiB | 12 h 31 min 9 m | 103 x 14 x 103 | Download | |
| ... | |||||
This should take overall.
With the arrival of the fantastic 1:144 Discovery from 2001: A Space Odyssey model from Mobius I wanted a high quality lunar shuttle to go with it. It turns out there are no good quality models of this kit to be had at this scale. So I set out to make this one. 1500 hours later, this is the result.
Some of the key features:
The model is designed to be printed at 1:144 with 1mm thick walls. If you scale it to a larger size, obviously walls will be thicker. This model has very tight tolerances.
Not recommended for FDM printers unless you scale it up significantly.
This model has been designed for reasonably serious modelers.
0.05mm layer height
Antialiasing on: 8 levels
You are about to report 2001 Aries 1B Lunar Carrier 1:144 Model | Assembly for violating our Terms and Conditions. Please take a few moments to fill in the following information.
Comments