Batman The Dark Knight Model

Batman the dark Knight STL file optimized for FDM-FFF DLP-SLA-SLS printing

Two size for FDM-FFF, for DLP-SLA-SLS,

Assembly Figure

more than 200 hours of modeling

two versions

however, the dimensions can be changed with each slicer

in total is composed of 2,5 mil points

all the files have been decimated by the polygons, but without losing the details, this makes the light files suitable for each computer

dimensions approximately:

FDM-FFF:

• W 22 Cm D 19 Cm H 32 Cm
• W 8,6 inch D 7,4 inch H 12 inch

DLP-SLA-SLS:

• W 11 Cm D 10 Cm H 16 Cm
• W 4,3 inch D 4 inch H 6,2 inch

all files are already in place for optimal printing

Batman the dark Knight 3D model was designed to get a clean print result, without considering printing material consumption, However, you are free to rotate, or scale,

every part of the model in the most convenient way for you.

Each file has been checked and repaired with Netfabb

The parts of the model are already positioned for 3D printing

Compatible with every Slicer- Simplify3D, Care, Slic3r, etc ...

All the parts of the model have been cut so as to be printed vertically, for a higher quality of printing

The Dark Knight is a 2008 superhero film directed by Christopher Nolan from a screenplay co-written with his brother Jonathan. Based on the DC Comics superhero Batman, it is the sequel to Batman Begins (2005) and the second installment in The Dark Knight Trilogy. The plot follows the vigilante Batman, police lieutenant James Gordon, and district attorney Harvey Dent, who form an alliance to dismantle organized crime in Gotham City. Their efforts are derailed by the Joker, an anarchistic mastermind who seeks to test how far the Batman will go to save the city from chaos. The ensemble cast includes Christian Bale, Michael Caine, Heath Ledger, Gary Oldman, Aaron Eckhart, Maggie Gyllenhaal, and Morgan Freeman.

Warner Bros. Pictures prioritized a sequel following the successful reinvention of the Batman film series with Batman Begins. Christopher and Batman Begins co-writer David S. Goyer developed the story elements, making Dent the central protagonist caught up in the battle between the Batman and the Joker. In writing the screenplay, the Nolans were influenced by 1980s Batman comics and crime drama films, and sought to continue Batman Begins' heightened sense of realism. From April to November 2007, filming took place with a $185 million budget in Chicago and Hong Kong, and on sets in England. The Dark Knight was the first major motion picture to be filmed with high-resolution IMAX cameras. Christopher avoided using computer-generated imagery unless necessary, insisting on practical stunts such as flipping an 18-wheel truck and blowing up a factory.

The Dark Knight was marketed with an innovative interactive viral campaign that initially focused on countering criticism of Ledger's casting by those who believed he was a poor choice to portray the Joker. Ledger died from an accidental prescription drug overdose in January 2008, leading to widespread interest from the press and public regarding his performance. When it was released in July, The Dark Knight received acclaim for its mature tone and themes, visual style, and performances—particularly that of Ledger, who received many posthumous awards including Academy, BAFTA, and Golden Globe awards for Best Supporting Actor, making The Dark Knight the first comic-book film to receive major industry awards. It broke several box-office records and became the highest-grossing 2008 film, the fourth-highest-grossing film of its time, and the highest-grossing superhero film.

Since its release, The Dark Knight has been assessed as one of the greatest superhero films ever made, one of the best movies of the 2000s, and one of the best films ever made. It is considered the "blueprint" for many modern superhero films, particularly for its rejection of a typical comic-book movie style in favor of a crime film that features comic-book characters. Many filmmakers sought to repeat its success by emulating its gritty, realistic tone to varying degrees of success. The Dark Knight has been analyzed for its themes of terrorism and the limitations of morality and ethics. The United States Library of Congress selected it for preservation in the National Film Registry in 2020. A sequel, The Dark Knight Rises, concluded The Dark Knight trilogy in 2012.

"wikipedia"

Recommended settings for printing

each part was cut to be printed vertically, to have a better quality print, so for the upper parts,

it is recommended to print with a 4-5 skirt

Quality

Layer height: 0.1mm*

Initial layer thickness: 0.3mm

Bottom/top pattern: lines

Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers).

*Layer Height 0.1mm is recommended for a better quality for the printed model. However, the printing time will double.

As a STL file provider, our goal is to ensure that the files are error-free and printable in the most accurate way. This is why we only test print the most difficult segments of

the model’s parts.

The model's parts have been tested and printed in PLA. In case you need advice where to get your filaments from, check our partner's website.

Speed setups:

Infill speed: 30mm/s

Outer shell speed : 30mm/s

Inner shell speed: 20mm/s

Top/bottom speed: 20mm/s

Support speed: 50mm/s

Travel speed: 150mm/s

Skirt speed: 30mm/s

Amount of slower layers: 4

Infill:

Infill pattern: Grid

Line distance: 1.5mm

Infill overlap: 20%

Infill layers: 0

Support:

Enable support: Check

Placement: Everywhere

Overhang angle: 30°

X/Y distance: 0.7mm

Top distance: 0.2mm

Bottom distance: 0.2mm

Stair step height: 0.5mm

Join distance: 0.7mm

Area smoothing: 0.6mm

Use towers: check

Pattern: Grid

Line distance: 1.5mm

LEGAL PRIVACY POLICY: Any UNAUTHORIZED use of my profile, video, pictures or audio in any form or in a forum now or in the future is NOT permissible without my expressed written consent.

Any act to promote or gain profit in any manner (e.g. either monetarily or socially) from the use of my profile, video, pictures or audio in any form my profile is a violation

of my privacy and subject to legal action. BY WATCHING THIS: You acknowledge and agree that you shall not post, upload, publish, transmit or make available in any way content of this

page including images and recording streamed live video available for download. This is intended as, and presented as a one time, live, one view presentation only.

Penalties of Copyright Infringement: By reproducing, republishing or redistributing the work of a copyright holder without permission, you may be violating or infringing

on his or her rights under the Copyright Act. The copyright holder may sue for compensation cost from $ 250 to $ 150,000 or one year jail sentence

Generic

Recommended settings for printing

each part was cut to be printed vertically, to have a better quality print, so for the upper parts,

it is recommended to print with a 4-5 skirt

Quality:

• Layer height: 0.1mm*
• Initial layer thickness: 0.3mm
• Bottom/top pattern: lines
• Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers).

*Layer Height 0.1mm is recommended for a better quality for the printed model. However, the printing time will double.

As a STL file provider, our goal is to ensure that the files are error-free and printable in the most accurate way. This is why we only test print the most difficult segments of

the model’s parts.

The model's parts have been tested and printed in PLA. In case you need advice where to get your filaments from, check our partner's website.

Speed setups:

• Infill speed: 30mm/s
• Outer shell speed : 30mm/s
• Inner shell speed: 20mm/s
• Top/bottom speed: 20mm/s
• Support speed: 50mm/s
• Travel speed: 150mm/s
• Skirt speed: 30mm/s
• Amount of slower layers: 4

Infill:

• Infill pattern: Grid
• Line distance: 1.5mm
• Infill overlap: 20%
• Infill layers: 0

Support:

• Enable support: Check
• Placement: Everywhere
• Overhang angle: 30°
• X/Y distance: 0.7mm
• Top distance: 0.2mm
• Bottom distance: 0.2mm
• Stair step height: 0.5mm
• Join distance: 0.7mm
• Area smoothing: 0.6mm
• Use towers: check
• Pattern: Grid
• Line distance: 1.5mm