STL files and the cutting of this model are preserved as created by the Author. This model was not moderated by Gambody, it is not subject to technical support by Gambody, and we do not offer any guarantees on the 3D printing results.
Stock models can only be purchased in an order separate from the Premium STL files by Gambody. If a Premium model is added to the Cart, the Stock models are deleted automatically, and vice versa.
You can read more about Stock models on Gambody's Blog.
The Author of the Stock model can provide technical support if they wish. All your questions, requests, wishes and remarks can be left in the comment section below.
Gambody Team can consider providing a Premium version of the model if highly requested.
|
|||||
|---|---|---|---|---|---|
| File Name | File Size | Time / Filament | Object Size (x/y/z mm) |
||
|
Base neck.stl |
5.66 MiB | 3 h 2 min 2 m | 45 x 52 x 28 | Download | |
|
Body.stl |
12.94 MiB | 3 h 6 min 2 m | 75 x 48 x 16 | Download | |
|
Body2.stl |
13.05 MiB | 3 h 5 min 2 m | 75 x 48 x 16 | Download | |
|
Body3.stl |
4.76 MiB | 1 h 37 min 1 m | 31 x 38 x 25 | Download | |
|
Foot x4.stl |
2.31 MiB | 21 min <1 m | 22 x 10 x 14 | Download | |
|
Head.stl |
22.48 MiB | 2 h 7 min 1 m | 61 x 21 x 26 | Download | |
|
Joint tail.stl |
2.42 MiB | 6 min <1 m | 13 x 6 x 6 | Download | |
|
Joint X6.stl |
4.97 MiB | 14 min <1 m | 12 x 12 x 13 | Download | |
|
Joint2 x6.stl |
2.38 MiB | 9 min <1 m | 8 x 8 x 14 | Download | |
|
Leg front dx.stl |
15.27 MiB | 1 h 53 min 1 m | 32 x 65 x 13 | Download | |
|
Leg front sx.stl |
15.20 MiB | 1 h 53 min 1 m | 32 x 65 x 13 | Download | |
|
Leg rear dx.stl |
15.16 MiB | 1 h 40 min 1 m | 35 x 65 x 13 | Download | |
|
Leg rear sx.stl |
15.21 MiB | 1 h 39 min 1 m | 35 x 65 x 13 | Download | |
|
Leg2 front dx.stl |
3.24 MiB | 38 min <1 m | 19 x 45 x 12 | Download | |
|
Leg2 front sx.stl |
3.25 MiB | 37 min <1 m | 19 x 45 x 12 | Download | |
|
Leg2 rear dx.stl |
3.20 MiB | 34 min <1 m | 20 x 38 x 12 | Download | |
|
leg2 rear sx.stl |
3.17 MiB | 34 min <1 m | 20 x 38 x 12 | Download | |
|
Muzzle.stl |
5.96 MiB | 10 min <1 m | 22 x 8 x 8 | Download | |
|
Neck.stl |
2.88 MiB | 1 h 1 min 1 m | 25 x 27 x 19 | Download | |
|
secon type tail2.stl |
3.81 MiB | 18 min <1 m | 26 x 10 x 11 | Download | |
|
second type tail1.stl |
3.67 MiB | 21 min <1 m | 31 x 11 x 12 | Download | |
|
second type tail3.stl |
3.85 MiB | 15 min <1 m | 26 x 9 x 10 | Download | |
|
second type tail5.stl |
1.86 MiB | 12 min <1 m | 27 x 9 x 10 | Download | |
|
second type tile4.stl |
3.88 MiB | 12 min <1 m | 24 x 9 x 8 | Download | |
|
Tail1.stl |
4.83 MiB | 19 min <1 m | 32 x 12 x 9 | Download | |
|
Tail2.stl |
4.47 MiB | 13 min <1 m | 23 x 9 x 8 | Download | |
|
Tail3.stl |
4.55 MiB | 9 min <1 m | 23 x 8 x 6 | Download | |
|
Tail4.stl |
3.00 MiB | 13 min <1 m | 24 x 9 x 14 | Download | |
| ... | |||||
This should take overall.
Here is one of my favorite subjects, absolutely! "Friender" Kyashan's android dog. Simple assembly: 36 parts,a little glue, 4 screws 2x9 mm self-threading for the legs (head diameter 4mm). The model is fully articulated, more than 15cm tall and 15cm longer (the dimensions vary depending on the position)
You will also find the images for the assembly, and the correct arrangement on the print bed
Pla Plus
Temp 210°
layer 0,1
supports everywhere,
level fan: active
Infill 80%
You are about to report Friender (Kyashan) - MAXLAB VERSION for violating our Terms and Conditions. Please take a few moments to fill in the following information.
Comments