Help us decide: Would you like to see this model in the Premium section?

What does this mean?

0.0%

Voted 0 of 100

Source Files

Description

Printing Details

STL files and the cutting of this model are preserved as created by the Author. This model was not moderated by Gambody, it is not subject to technical support by Gambody, and we do not offer any guarantees on the 3D printing results.

Stock models can only be purchased in an order separate from the Premium STL files by Gambody. If a Premium model is added to the Cart, the Stock models are deleted automatically, and vice versa.

You can read more about Stock models on Gambody's Blog.

The Author of the Stock model can provide technical support if they wish. All your questions, requests, wishes and remarks can be left in the comment section below.

Gambody Team can consider providing a Premium version of the model if highly requested.


	File Name	File Size	Time / Filament	Object Size (x/y/z mm)
	S_Trump_FDM-FFF_3.stl	4.06 MiB	17 min <1 m	24 x 7 x 16	Download
	S_Trump_FDM-FFF_7.stl	7.00 MiB	21 h 10 min 12 m	174 x 132 x 101	Download
	S_Trump_FDM-FFF_5.stl	7.64 MiB	1 h 9 min 1 m	20 x 44 x 30	Download
	S_Trump_FDM-FFF_4.stl	7.89 MiB	1 h 16 min 1 m	21 x 47 x 32	Download
	S_Trump_FDM-FFF_6.stl	14.51 MiB	30 h 60 min 19 m	165 x 100 x 107	Download
	S_Trump_FDM-FFF_9.stl	26.42 MiB	15 h 41 min 8 m	100 x 102 x 52	Download
	S_Trump_FDM-FFF_10.stl	27.80 MiB	16 h 34 min 9 m	96 x 114 x 39	Download
	S_Trump_FDM-FFF_8.stl	32.36 MiB	20 h 54 min 11 m	155 x 94 x 52	Download
	S_Trump_FDM-FFF_11.stl	33.46 MiB	17 h 20 min 9 m	122 x 82 x 41	Download
	S_TRump_FDM-FFF_2.stl	46.76 MiB	36 h 3 min 23 m	76 x 103 x 149	Download
	S_Trump_FDM-FFF_1.stl	52.13 MiB	19 h 3 min 11 m	118 x 95 x 97	Download
...

Super Trump Model Printing Miniature Assembly File STL OBJ for 3D Printing FDM-FFF DLP-SLA-SLS

Two size 1: 6 for FDM-FFF, 1: 12 for DLP-SLA-SLS,

Assembly Figure

more than 200 hours of modeling

two versions

however, the dimensions can be changed with each slicer

in total Super Trump is composed of 2,7 mil points

all the files have been decimated by the polygons, but without losing the details, this makes the light files suitable for each computer

dimensions approximately FDM-FFF W 20 Cm D 19 Cm H 28 Cm

W 7,8 inch D 7,4 inch H 11 inch

dimensions approximately DLP-SLA-SLS W 10 Cm D 9,8 Cm H 14 Cm

W 4 inch D 3,8 inch H 5,5 inch

all files are already in place for optimal printing

Super Trump3D model was designed to get a clean print result, without considering printing material consumption, However, you are free to rotate, or scale,

every part of the model in the most convenient way for you.

Each file has been checked and repaired with Netfabb

The parts of the model are already positioned for 3D printing

Compatible with every Slicer- Simplify3D, Care, Slic3r, etc ...

All the parts of the model have been cut so as to be printed vertically, for a higher quality of printing

Generic

Recommended settings for printing

each part was cut to be printed vertically, to have a better quality print, so for the upper parts,

it is recommended to print with a 4-5 skirt

Quality:

Layer height: 0.1mm*
Initial layer thickness: 0.3mm
Bottom/top pattern: lines
Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers).
*Layer Height 0.1mm is recommended for a better quality for the printed model. However, the printing time will double.

As a STL file provider, our goal is to ensure that the files are error-free and printable in the most accurate way. This is why we only test print the most difficult segments of

the model’s parts.

The model's parts have been tested and printed in PLA. In case you need advice where to get your filaments from, check our partner's website.

Speed setups: